I realize this is OT.
I just got a Cisco AS5300, and I need to configure it like such:
Asterisk -----(H323/SIP)------> Cisco ----- (E1/PRI)------->Telco
So calls originate from the Asterisk side (registered users on SIP or just ZAP phones), and they go out H323 or SIP to Cisco, where they go out PRI.
I have the Asterisk side sorted (either H323 or SIP), I need help in the Cisco side. Can anyone give me a brief HOW-TO or tutorial on getting this (either SIP or H323) done on the Cisco side.
So I am have done a few things, but dont know how they hook up:
I have dial-peers 1, 100, 101 (why is it like this, are they related?)
I specified the IP of my Asterisk box on dial-peer 101
I also tried enabled sip-ua
Also, the number-plans, how do I say any number that comes in must be dialled, SO i wont be using a prefix, just all numbers must go out E1.
What is …T in
show dial-peer voice summary
dial-peer hunt 0
AD PRE PASS
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET PORT
1 pots up up 0 0:0
100 voip up up …T 1 syst ras
101 voip up up …T 2 syst ipv4:192.168.0.233
How do I specify that H323 or SIP must be for incoming calls, and outgoing must go out on the E1.
Cisco is running IOS 12.1.5-12.2.13a
I realize this is alot of questions, so please bear with me