X100P installation,


#1

I have a problem with the installation of X100P when I try to mont the driver with modprobe wcfxs it gives me the following message
[root@Pc-Imad1 asterisk]# modprobe wcfxo
/lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-8/misc/wcfxo.o: insmod /lib/modules/2.4.20-8/misc/wcfxo.o failed
/lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed

, and ztcfg - vvv give me the follows message
Zaptel Configuration

Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Slaves: 05)
Channel 06: FXO Kewlstart (Default) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Slaves: 08)

8 channels configured.

ZT_CHANCONFIG failed on channel 5: No such device or address (6)

and the file zaptel is configured as follows

fxsks=1-4 ;ici on dit qu’on a quatre module FXO
fxoks=5-8
loadzone=fr
defaultzone=fr

it must signaled that I have two card one with 4 connector FXS and the other with 4 connectors FXO, the card FXO is monted without problem.

if you can help me it really very urgent think’s in advance :unamused: