Hello all i just got a TDM400P Card today with one module. running on trixbox 1.1.1 outgoing calls work just fine.
How ever it does not answer anything!. i watched the cli and saw no activity!. does anyone know how to fix this?
Here is my zap file.
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=0
;Include AMP configs
#include zapata_additional.conf
and zapata-auto
; Autogenerated by /usr/local/sbin/genzaptelconf – do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived
; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
signalling=fxs_ks
; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 1
context=from-zaptel
group=0
channel => 1
; channel 2, WCTDM, inactive.
; channel 3, WCTDM, inactive.
; channel 4, WCTDM, inactive.
; Span 2: ZTDUMMY/1 “ZTDUMMY/1 1”
Please help!. Thanks