Currently on my Asterisk, I have completed my Dial plan and everything associated with that. But when I try to go and make a call , I receive an fast busy. What could be the possible reasons I receive a fast busy. I’m just trying to do some troubleshooting.
Thanks,
BD
troubleshooting ? that would entail showing us the appropriate dialplan section and the logfile fragment for a failed call.
Here is the current extension.conf file:
;
; Static extension configuration file, used by
; the pbx_config module. This is where you configure all your
; inbound and outbound calls in Asterisk.
;
; This configuration file is reloaded
; - With the “extensions reload” command in the CLI
; - With the “reload” command (that reloads everything) in the CLI
;
; The “General” category is for certain variables.
;
[general]
;
; If static is set to no, or omitted, then the pbx_config will rewrite
; this file when extensions are modified. Remember that all comments
; made in the file will be lost when that happens.
;
; XXX Not yet implemented XXX
;
static=yes
;
; if static=yes and writeprotect=no, you can save dialplan by
; CLI command ‘save dialplan’ too
;
writeprotect=no
;
; If autofallthrough is set, then if an extension runs out of
; things to do, it will terminate the call with BUSY, CONGESTION
; or HANGUP depending on Asterisk’s best guess (strongly recommended).
;
; If autofallthrough is not set, then if an extension runs out of
; things to do, asterisk will wait for a new extension to be dialed
; (this is the original behavior of Asterisk 1.0 and earlier).
;
autofallthrough=yes
;
; If clearglobalvars is set, global variables will be cleared
; and reparsed on an extensions reload, or Asterisk reload.
;
; If clearglobalvars is not set, then global variables will persist
; through reloads, and even if deleted from the extensions.conf or
; one of its included files, will remain set to the previous value.
;
clearglobalvars=no
;
; If priorityjumping is set to ‘yes’, then applications that support
; ‘jumping’ to a different priority based on the result of their operations
; will do so (this is backwards compatible behavior with pre-1.2 releases
; of Asterisk). Individual applications can also be requested to do this
; by passing a ‘j’ option in their arguments.
;
priorityjumping=no
;
; You can include other config files, use the #include command
; (without the ‘;’). Note that this is different from the “include” command
; that includes contexts within other contexts. The #include command works
; in all asterisk configuration files.
;#include “filename.conf”
; The “Globals” category contains global variables that can be referenced
; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental
; variables,
; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid
;
[globals]
;CONSOLE=Console/dsp ; Console interface for demo
;CONSOLE=Zap/1
;CONSOLE=Phone/phone0
;IAXINFO=guest ; IAXtel username/password
;IAXINFO=myuser:mypass
;TRUNK=Zap/g2
; Trunk interface
LINE1=Zap/25
LINE2=Zap/26
LINE3=Zap/27
;
; Note the ‘g2’ in the TRUNK variable above. It specifies which group (defined
; in zapata.conf) to dial, i.e. group 2, and how to choose a channel to use in
; the specified group. The four possible options are:
;
; g: select the lowest-numbered non-busy Zap channel
; (aka. ascending sequential hunt group).
; G: select the highest-numbered non-busy Zap channel
; (aka. descending sequential hunt group).
; r: use a round-robin search, starting at the next highest channel than last
; time (aka. ascending rotary hunt group).
; R: use a round-robin search, starting at the next lowest channel than last
; time (aka. descending rotary hunt group).
;
;TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0)
;TRUNK=IAX2/user:pass@provider
;
; Any category other than “General” and “Globals” represent
; extension contexts, which are collections of extensions.
;
; Extension names may be numbers, letters, or combinations
; thereof. If an extension name is prefixed by a ‘_’
; character, it is interpreted as a pattern rather than a
; literal. In patterns, some characters have special meanings:
;
; X - any digit from 0-9
; Z - any digit from 1-9
; N - any digit from 2-9
; [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9)
; . - wildcard, matches anything remaining (e.g. _9011. matches
; anything starting with 9011 excluding 9011 itself)
; ! - wildcard, causes the matching process to complete as soon as
; it can unambiguously determine that no other matches are possible
;
; For example the extension _NXXXXXX would match normal 7 digit dialings,
; while _1NXXNXXXXXX would represent an area code plus phone number
; preceeded by a one.
;
; Each step of an extension is ordered by priority, which must
; always start with 1 to be considered a valid extension. The priority
; “next” or “n” means the previous priority plus one, regardless of whether
; the previous priority was associated with the current extension or not.
; The priority “same” or “s” means the same as the previously specified
; priority, again regardless of whether the previous entry was for the
; same extension. Priorities may be immediately followed by a plus sign
; and another integer to add that amount (most useful with ‘s’ or ‘n’).
; Priorities may then also have an alias, or label, in
; parenthesis after their name which can be used in goto situations
;
; Contexts contain several lines, one for each step of each
; extension, which can take one of two forms as listed below,
; with the first form being preferred. One may include another
; context in the current one as well, optionally with a
; date and time. Included contexts are included in the order
; they are listed.
;
;[context]
;exten => someexten,priority[+offset][(alias)],application(arg1,arg2,…)
;exten => someexten,priority[+offset][(alias)],application,arg1|arg2…
;[outboundfxs]
;exten => 611,1,Answer()
;exten => 611,2,Echo()
; Timing list for includes is
;
; |||
;
;include => daytime|9:00-17:00|mon-fri||
;
; ignorepat can be used to instruct drivers to not cancel dialtone upon
; receipt of a particular pattern. The most commonly used example is
; of course ‘9’ like this:
;
;ignorepat => 9
;
; so that dialtone remains even after dialing a 9.
;
;
; Sample entries for extensions.conf
;
;
;[dundi-e164-canonical]
;
; List canonical entries here
;
;exten => 12564286000,1,Macro(std-exten,6000,IAX2/foo)
;exten => _125642860XX,1,Dial(IAX2/otherbox/${EXTEN:7})
;[dundi-e164-customers]
;
; If you are an ITSP or Reseller, list your customers here.
;
;exten => _12564286000,1,Dial(SIP/customer1)
;exten => _12564286001,1,Dial(IAX2/customer2)
;[dundi-e164-via-pstn]
;
; If you are freely delivering calls to the PSTN, list them here
;
;exten => _1256428XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Expose all of 256-428
;exten => _1256325XXXX,1,Dial(Zap/g2/${EXTEN:7}) ; Ditto for 256-325
;[dundi-e164-local]
;
; Context to put your dundi IAX2 or SIP user in for
; full access
;
;include => dundi-e164-canonical
;include => dundi-e164-customers
;include => dundi-e164-via-pstn
;[dundi-e164-switch]
;
; Just a wrapper for the switch
;
;switch => DUNDi/e164
;[dundi-e164-lookup]
;
; Locally to lookup, try looking for a local E.164 solution
; then try DUNDi if we don’t have one.
;
;include => dundi-e164-local
;include => dundi-e164-switch
;
; DUNDi can also be implemented as a Macro instead of using
; the Local channel driver.
;
;[macro-dundi-e164]
;
; ARG1 is the extension to Dial
;
;exten => s,1,Goto(${ARG1},1)
;include => dundi-e164-lookup
;
; Here are the entries you need to participate in the IAXTEL
; call routing system. Most IAXTEL numbers begin with 1-700, but
; there are exceptions. For more information, and to sign
; up, please go to www.iaxtel.com
;
;[iaxtel700]
;exten => _91700XXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel)
;
; The SWITCH statement permits a server to share the dialplain with
; another server. Use with care: Reciprocal switch statements are not
; allowed (e.g. both A -> B and B -> A), and the switched server needs
; to be on-line or else dialing can be severly delayed.
;
;[iaxprovider]
;switch => IAX2/user:[key]@myserver/mycontext
[trunkint]
;
; International long distance through trunk
;
exten => _9011.,1,Macro(dundi-e164,${EXTEN:4})
exten => _9011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[trunkld]
;
; Long distance context accessed through trunk
;
;exten => _91NXXNXXXXXX,1,Macro(dundi-e164,${EXTEN:1})
exten => _91NXXNXXXXXX,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[trunklocal]
;
; Local ten-digit dialing accessed through trunk interface
;
exten => _9NXXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[trunktollfree]
;
; Long distance context accessed through trunk interface
;
exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[international]
;
; Master context for international long distance
;
ignorepat => 9
include => longdistance
include => trunkint
[longdistance]
exten => _1NXXNXXXXXX, 1, SetCallerPres(allowed)
exten => _1NXXNXXXXXX, 2, Dial(${LINE3}/${EXTEN})
; Master context for long distance
;
ignorepat => 9
include => local
include => trunkld
[local]
;
; Master context for local, toll-free, and iaxtel calls only
;
ignorepat => 9
include => default
include => parkedcalls
include => trunklocal
;include => iaxtel700
include => trunktollfree
;include => iaxprovider
;
; You can use an alternative switch type as well, to resolve
; extensions that are not known here, for example with remote
; IAX switching you transparently get access to the remote
; Asterisk PBX
;
; switch => IAX2/user:password@bigserver/local
;
; An “lswitch” is like a switch but is literal, in that
; variable substitution is not performed at load time
; but is passed to the switch directly (presumably to
; be substituted in the switch routine itself)
;
; lswitch => Loopback/12${EXTEN}@othercontext
;
; An “eswitch” is like a switch but the evaluation of
; variable substitution is performed at runtime before
; being passed to the switch routine.
;
; eswitch =I:WQAX2/context@${CURSERVER}
[macro-stdexten];
;
; Standard extension macro:
; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,Dial(${ARG2},20,r) ; Ring the interface, 20 seconds maximum
exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
;exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announce
enten => s-NOANSWER,1,Hangup()
exten => s-NOANSWER,2,Goto(default,s,1) ; If they press #, return to start
;exten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announce
exten => s-BUSY,1,Hangup()
exten => s-BUSY,2,Goto(default,s,1) ; If they press #, return to start
exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answer
exten => a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain
[macro-stdRDNISexten];
;
;Standard extension macro
; ${ARG1} - Extension (we could have used $MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,Set(origcpn=${ARG1}) ; Check if user extension has CFA always activated.
exten => s,n,DBget(temp=CFIM/${ARG1})
;exten => s,1,Set(temp=${DB(CFIM/${ARG1})})
exten => s,n,GotoIf(${temp}?cfim:nocfim)
;exten => s,n(cfim),Dial(Local/${temp}@outboundcfwd/n)
exten => s,n(cfim),Goto(outboundcfwd,s,1)
exten => s,n(nocfim),NoOp
exten => s,n,Dial(${ARG2},20,r) ; Ring the interface, 20 seconds maximum
exten => s,n,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
;exten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announce
exten => s-BUSY,1,Hangup() ; Used to return User Busy over PRI & convert to 486 by IAD
exten => s-BUSY,2,Goto(default,s,1) ; If they press #, return to start
exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answer
exten => a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain
[macro-stdPrivacyexten];
;
; Standard extension macro:
; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
; ${ARG3} - Optional DONTCALL context name to jump to (assumes the s,1 extension-priority)
; ${ARG4} - Optional TORTURE context name to jump to (assumes the s,1 extension-priority)`
;
exten => s,1,Dial(${ARG2},20|p) ; Ring the interface, 20 seconds maximum, call screening option (or use P for databased call screening)
exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER)
exten => s-NOANSWER,1,Voicemail(u${ARG1}) ; If unavailable, send to voicemail w/ unavail announce
exten => s-NOANSWER,2,Goto(default,s,1) ; If they press #, return to start
exten => s-BUSY,1,Voicemail(b${ARG1}) ; If busy, send to voicemail w/ busy announce
exten => s-BUSY,2,Goto(default,s,1) ; If they press #, return to start
exten => s-DONTCALL,1,Goto(${ARG3},s,1) ; Callee chose to send this call to a polite “Don’t call again” script.
exten => s-TORTURE,1,Goto(${ARG4},s,1) ; Callee chose to send this call to a telemarketer torture script.
exten => _s-.,1,Goto(s-NOANSWER,1) ; Treat anything else as no answer
exten => a,1,VoicemailMain(${ARG1}) ; If they press *, send the user into VoicemailMain
[inboundvoip]
;used for incoming calls to any number served by pbx
exten => 4524, 1, Macro (stdexten,4524,${LINE1})
exten => 4525, 1, Macro (stdexten,4525,${LINE2})
exten => 4526 , 1, Macro (stdexten,4526,${LINE3})
[outboundfax]
exten => _NXXXXXX,1,Dial(${LINE4}/${EXTEN})
exten => _NXXNXXXXXX,1,Dial(${LINE4}/${EXTEN})
exten =>_1NXXNXXXXXXX,1,Dial(${LINE4}/${EXTEN})
[outboundcfwd]
exten => s,1,SetCallerPres(allowed)
exten => s,2,Set(CALLERID(rdnis)=${origcpn})
exten => s,3,Dial(${LINE3}/${temp})
[outboundfxs]
;continue to provide dialtone if 9 is the first digit pressed
ignorepat => 9
;list all extensions for extension to extension
exten => 4524,1,Macro(stdexten,4524,${LINE1})
exten => 4525,1,Macro(stdexten,4525,${LINE2})
exten => 4526,1,Macro(stdexten,4526,${LINE3})
;extension used to make recordings for IVR
exten => 7777,1,Goto(recordings,7777,1)
;extension used to check Voicemail
exten => 8500,1,VoiceMailMain
;used for other outbound calls not matched by the previous extensions
include => local
include => longdistance
include => international
;include => apps
[local]
exten => _*XX,1,SetCallerPres(allowed) ;Feature Access Code Dialing
exten => _*XX,2,Dial(${LINE3}/${EXTEN})
exten => _N11,1,SetCallerPres(allowed) ;N11 Dialing
exten => _N11,2,Dial(${LINE3}/${EXTEN})
exten => _XXXX,1,SetCallerPres(allowed) ;4-digit BW VPN Dialing
exten => _XXXX,2,Dial(${LINE3}/${EXTEN})
exten => _NXXXXXX,1,SetCallerPres(allowed) ;7-digit Local Dialing
exten => _NXXXXXX,2,Dial(${LINE3}/${EXTEN})
exten => _NXXNXXXXXX,1,SetCallerPres(allowed) ;10-digit Local Dialing
exten => _NXXNXXXXXX,2,Dial(${LINE3}/${EXTEN})
[longdistance]
exten => _1NXXNXXXXXX,1,SetCallerPres(allowed) ;11-digit LD Dialing
exten => _1NXXNXXXXXX,2,Dial(${LINE3}/${EXTEN})
[international]
[dialbyextension]
exten => s,1,WaitExten
exten => 4024,1,Macro(stdexten,4524,${LINE1})
exten => 4025,1,Macro(stdexten,4525,${LINE2})
exten => 4026,1,Macro(stdexten,4526,${LINE3})
[recordings]
exten => 7777,1,Wait(2)
exten => 7777,2,Record(/tmp/asterisk-recording:gsm)
exten => 7777,3,Wait(2)
exten => 7777,4,Playback(/tmp/asterisk-recording)
exten => 7777,5,Wait(2)
exten => 7777,6,Hangup
[demo]
;
; We start with what to do when a call first comes in.
;
;exten => s,1,Wait,1 ; Wait a second, just for fun
;exten => s,n,Answer ; Answer the line
;exten => s,n,Set(TIMEOUT(digit)=5) ; Set Digit Timeout to 5 seconds
;exten => s,n,Set(TIMEOUT(response)=10) ; Set Response Timeout to 10 seconds
;exten => s,n(restart),BackGround(demo-congrats) ; Play a congratulatory message
;exten => s,n(instruct),BackGround(demo-instruct) ; Play some instructions
;exten => s,n,WaitExten ; Wait for an extension to be dialed.
;exten => 2,1,BackGround(demo-moreinfo) ; Give some more information.
;exten => 2,n,Goto(s,instruct)
;exten => 3,1,Set(LANGUAGE()=fr) ; Set language to french
;exten => 3,n,Goto(s,restart) ; Start with the congratulations
;exten => 1000,1,Goto(default,s,1)
;
; We also create an example user, 1234, who is on the console and has
; voicemail, etc.
;
;exten => 1234,1,Playback(transfer,skip) ; “Please hold while…”
; (but skip if channel is not up)
;exten => 1234,n,Macro(stdexten,1234,${CONSOLE})
;exten => 1235,1,Voicemail(u1234) ; Right to voicemail
;exten => 1236,1,Dial(Console/dsp) ; Ring forever
;exten => 1236,n,Voicemail(u1234) ; Unless busy
;
; # for when they’re done with the demo
;
;exten => #,1,Playback(demo-thanks) ; “Thanks for trying the demo”
;exten => #,n,Hangup ; Hang them up.
;
; A timeout and “invalid extension rule”
;
;exten => t,1,Goto(#,1) ; If they take too long, give up
;exten => i,1,Playback(invalid) ; “That’s not valid, try again”
;
; Create an extension, 500, for dialing the
; Asterisk demo.
;
;exten => 500,1,Playback(demo-abouttotry); Let them know what’s going on
;exten => 500,n,Dial(IAX2/guest@misery.digium.com/s@default) ; Call the Asterisk demo
;exten => 500,n,Playback(demo-nogo) ; Couldn’t connect to the demo site
;exten => 500,n,Goto(s,6) ; Return to the start over message.
;
; Create an extension, 600, for evaulating echo latency.
;
exten => 600,1,Playback(demo-echotest) ; Let them know what’s going on
exten => 600,n,Echo ; Do the echo test
exten => 600,n,Playback(demo-echodone) ; Let them know it’s over
exten => 600,n,Goto(s,6) ; Start over
;
; Give voicemail at extension 8500
;
;exten => 8500,1,VoicemailMain
;exten => 8500,n,Goto(s,6)
;
; Here’s what a phone entry would look like (IXJ for example)
;
;exten => 1265,1,Dial(Phone/phone0,15)
;exten => 1265,n,Goto(s,5)
;[mainmenu]
;
; Example “main menu” context with submenu
;
;exten => s,1,Answer
;exten => s,n,Background(thanks) ; “Thanks for calling press 1 for sales, 2 for support, …”
;exten => s,n,WaitExten
;exten => 1,1,Goto(submenu,s,1)
;exten => 2,1,Hangup
;include => default
;
;[submenu]
;exten => s,1,Ringing ; Make them comfortable with 2 seconds of ringback
;exten => s,n,Wait,2
;exten => s,n,Background(submenuopts) ; “Thanks for calling the sales department. Press 1 for steve, 2 for…”
;exten => s,n,WaitExten
;exten => 1,1,Goto(default,steve,1)
;exten => 2,1,Goto(default,mark,2)
[default]
;
; By default we include the demo. In a production system, you
; probably don’t want to have the demo there.
;
;include => demo
;
; An extension like the one below can be used for FWD, Nikotel, sipgate etc.
; Note that you must have a [sipprovider] section in sip.conf
;
;exten => _41X.,1,Dial(SIP/${EXTEN:2}@sipprovider,r)
; Real extensions would go here. Generally you want real extensions to be
; 4 or 5 digits long (although there is no such requirement) and start with a
; single digit that is fairly large (like 6 or 7) so that you have plenty of
; room to overlap extensions and menu options without conflict. You can alias
; them with names, too, and use global variables
;exten => 6245,hint,SIP/Grandstream1&SIP/Xlite1,Joe Schmoe ; Channel hints for presence
;exten => 6245,1,Dial(SIP/Grandstream1,20,rt) ; permit transfer
;exten => 6245,n(dial),Dial(${HINT},20,rtT) ; Use hint as listed
;exten => 6245,n,Voicemail(u6245) ; Voicemail (unavailable)
;exten => 6245,s+1,Hangup ; s+1, same as n
;exten => 6245,dial+101,Voicemail(b6245) ; Voicemail (busy)
;exten => 6361,1,Dial(IAX2/JaneDoe,rm) ; ring without time limit
;exten => 6389,1,Dial(MGCP/aaln/1@192.168.0.14)
;exten => 6394,1,Dial(Local/6275/n) ; this will dial ${MARK}
;exten => 6275,1,Macro(stdexten,6275,${MARK}) ; assuming ${MARK} is something like Zap/2
;exten => mark,1,Goto(6275|1) ; alias mark to 6275
;exten => 6536,1,Macro(stdexten,6236,${WIL}) ; Ditto for wil
;exten => wil,1,Goto(6236|1)
;
; Some other handy things are an extension for checking voicemail via
; voicemailmain
;
;exten => 8500,1,VoicemailMain
;exten => 8500,n,Hangup
;
; Or a conference room (you’ll need to edit meetme.conf to enable this room)
;
;exten => 8600,1,Meetme(1234)
;
; Or playing an announcement to the called party, as soon it answers
;
;exten = 8700,1,Dial(${MARK},30,A(/path/to/my/announcemsg))
;
; For more information on applications, just type “show applications” at your
; friendly Asterisk CLI prompt.
;
; 'show application ’ will show details of how you
; use that particular application in this file, the dial plan.
;
do you want to edit your post, and remove all the commented lines ??
Here are the current files:
Zaptel.conf[/b]
span=1,1,0,esf,b8zs
fxoks=25-27
fxsks=28
#bchan=1-23
#dchan=24
e&m=1-24
zapata.conf
;FXS channel config;
;;;;;;;;;;;;;;;;;;;;
signalling=fxo_ks
group=1
context=outboundfxs
callerid=<(555) 907-4524>
channel => 25
callerid=<(555) 907-4525>
channel => 26
callerid=<(555) 907-4526>
channel => 27
;;FXO Channel Config;;
signalling=fxs_ks
group=2
context=default
channel => 28
;CAS Signalling;;
signalling=em_w
context=inboundvoip
group=3
channel => 1-24
extensions.conf
LINE1=Zap/25
LINE2=Zap/26
LINE3=Zap/27
[trunkint]
International long distance through trunk
exten => _9011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[trunkld]
;
; Long distance context accessed through trunk
exten => _91NXXNXXXXXX,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[trunklocal]
;
; Local ten-digit dialing accessed through trunk interface
;
exten => _9NXXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[trunktollfree]
;
; Long distance context accessed through trunk interface
;
exten => _91800NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91888NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91877NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
exten => _91866NXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}})
[international]
;
; Master context for international long distance
;
ignorepat => 9
include => longdistance
include => trunkint
[longdistance]
exten => _1NXXNXXXXXX, 1, SetCallerPres(allowed)
exten => _1NXXNXXXXXX, 2, Dial(${LINE3}/${EXTEN})
; Master context for long distance
;
ignorepat => 9
include => local
include => trunkld
[local]
;
; Master context for local, toll-free, and iaxtel calls only
;
ignorepat => 9
include => trunklocal
include => trunktollfree
[macro-stdexten];
;
; Standard extension macro:
; ${ARG1} - Extension (we could have used ${MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,Dial(${ARG2},20,r)
exten => s,2,Goto(s-${DIALSTATUS},1)
enten => s-NOANSWER,1,Hangup()
exten => s-NOANSWER,2,Goto(default,s,1)
exten => s-BUSY,1,Hangup()
exten => s-BUSY,2,Goto(default,s,1)
exten => _s-.,1,Goto(s-NOANSWER,1)
exten => a,1,VoicemailMain(${ARG1})
[macro-stdRDNISexten];
;
;Standard extension macro
; ${ARG1} - Extension (we could have used $MACRO_EXTEN} here as well
; ${ARG2} - Device(s) to ring
;
exten => s,1,Set(origcpn=${ARG1})
exten => s,n,DBget(temp=CFIM/${ARG1})
exten => s,n,GotoIf(${temp}?cfim:nocfim)
exten => s,n(cfim),Goto(outboundcfwd,s,1)
exten => s,n(nocfim),NoOp
exten => s,n,Dial(${ARG2},20,r)
exten => s,n,Goto(s-${DIALSTATUS},1)
exten => s-BUSY,1,Hangup()
exten => s-BUSY,2,Goto(default,s,1)
exten => _s-.,1,Goto(s-NOANSWER,1)
exten => a,1,VoicemailMain(${ARG1})
[macro-stdPrivacyexten];
exten => s,1,Dial(${ARG2},20|p)
exten => s,2,Goto(s-${DIALSTATUS},1)
exten => s-NOANSWER,1,Voicemail(u${ARG1})
exten => s-NOANSWER,2,Goto(default,s,1)
exten => s-BUSY,1,Voicemail(b${ARG1})
exten => s-BUSY,2,Goto(default,s,1)
exten => s-DONTCALL,1,Goto(${ARG3},s,1)
exten => s-TORTURE,1,Goto(${ARG4},s,1)
exten => _s-.,1,Goto(s-NOANSWER,1)
exten => a,1,VoicemailMain(${ARG1})
[inboundvoip]
;used for incoming calls to any number served by pbx
exten => 4524,1, Macro (macro-stdexten,4524,${LINE1})
exten => 4525,1, Macro (macro-stdexten,4525,${LINE2})
exten => 4526 1, Macro (macro-stdexten,4526,${LINE3})
[outboundfax]
exten => _NXXXXXX,1,Dial(${LINE4}/${EXTEN})
exten => _NXXNXXXXXX,1,Dial(${LINE4}/${EXTEN})
exten =>_1NXXNXXXXXXX,1,Dial(${LINE4}/${EXTEN})
[outboundcfwd]
exten => s,1,SetCallerPres(allowed)
exten => s,2,Set(CALLERID(rdnis)=${origcpn})
exten => s,3,Dial(${LINE3}/${temp})
[outboundfxs]
;continue to provide dialtone if 9 is the first digit pressed
ignorepat => 9
;list all extensions for extension to extension
exten => 4524,1,Macro(macro-stdexten,4524,${LINE1})
exten => 4525,1,Macro(macro-stdexten,4525,${LINE2})
exten => 4526,1,Macro(macro-stdexten,4526,${LINE3})
;extension used to make recordings for IVR
exten => 7777,1,Goto(recordings,7777,1)
;extension used to check Voicemail
exten => 8500,1,VoiceMailMain
;used for other outbound calls not matched by the previous extensions
include => local
include => longdistance
include => international
[local]
exten => _*XX,1,SetCallerPres(allowed)
exten => _*XX,2,Dial(${LINE3}/${EXTEN})
exten => _N11,1,SetCallerPres(allowed)
exten => _N11,2,Dial(${LINE3}/${EXTEN})
exten => _XXXX,1,SetCallerPres(allowed)
exten => _XXXX,2,Dial(${LINE3}/${EXTEN})
exten => _NXXXXXX,1,SetCallerPres(allowed)
exten => _NXXXXXX,2,Dial(${LINE3}/${EXTEN})
exten => _NXXNXXXXXX,1,SetCallerPres(allowed)
exten => _NXXNXXXXXX,2,Dial(${LINE3}/${EXTEN})
[longdistance]
exten => _1NXXNXXXXXX,1,SetCallerPres(allowed)
exten => _1NXXNXXXXXX,2,Dial(${LINE3}/${EXTEN})
[international]
[dialbyextension]
exten => s,1,WaitExten
exten => 4024,1,Macro(stdexten,4524,${LINE1})
exten => 4025,1,Macro(stdexten,4525,${LINE2})
exten => 4026,1,Macro(stdexten,4526,${LINE3})
[recordings]
exten => 7777,1,Wait(2)
exten => 7777,2,Record(/tmp/asterisk-recording:gsm)
exten => 7777,3,Wait(2)
exten => 7777,4,Playback(/tmp/asterisk-recording)
exten => 7777,5,Wait(2)
exten => 7777,6,Hangup
or just post it all again ! perhaps you could edit the original long post and remove the stuff completely ?
and this would be nice so we can see what’s happening.