Hi ,
I have a problem width a TE110P.
Here is my config:
Autogenerated by /usr/sbin/genzaptelconf – do not hand edit
Zaptel Configuration File
This file is parsed by the Zaptel Configurator, ztcfg
It must be in the module loading order
Span 1: WCT1/0 “Digium Wildcard TE110P T1/E1 Card 0” (MASTER) HDB3/CCS
span=1,1,0,ccs,hdb3
termtype: te
bchan=1-15,17-31
dchan=16
asterisk:~# cat /etc/asterisk/zapata.conf
[trunkgroups]
[channels]
language=en
context=default
switchtype=euroisdn
pridialplan=unknown
prilocaldialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
rxwink=300
group=1
callgroup=1
pickupgroup=1
immediate=no
group = 1
channel => 1-15
channel => 17-31
Here is whaty I get:
asterisk:~# cat /proc/zaptel/1
Span 1: WCT1/0 “Digium Wildcard TE110P T1/E1 Card 0” (MASTER) HDB3/CCS
1 WCT1/0/1 Clear (In use)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
asterisk:~# ztscan
[1]
active=yes
alarms=OK
description=Digium Wildcard TE110P T1/E1 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Digium Wildcard TE110P T1/E1
location=PCI Bus 01 Slot 07
basechan=1
totchans=31
irq=19
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
asterisk:~# cat /proc/interrupts
CPU0 CPU1
0: 63 1 IO-APIC-edge timer
1: 0 2 IO-APIC-edge i8042
4: 0 2 IO-APIC-edge
6: 0 5 IO-APIC-edge floppy
7: 1 0 IO-APIC-edge parport0
8: 0 5 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 0 4 IO-APIC-edge i8042
14: 7410 478459 IO-APIC-edge ide0
19: 27933 49766445 IO-APIC-fasteoi wcte11xp
20: 0 0 IO-APIC-fasteoi ehci_hcd:usb4
21: 0 113 IO-APIC-fasteoi ehci_hcd:usb3, HDA Intel
22: 0 0 IO-APIC-fasteoi ohci_hcd:usb2
23: 0 0 IO-APIC-fasteoi ohci_hcd:usb1, ahci
216: 83738 15896794 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 581880 47963749 Local timer interrupts
RES: 1439961 61711 Rescheduling interrupts
CAL: 163 77 function call interrupts
TLB: 888 446 TLB shootdowns
TRM: 0 0 Thermal event interrupts
SPU: 0 0 Spurious interrupts
ERR: 1
MIS: 0
asterisk:~# tail /var/log/asterisk/messages
[Sep 22 12:31:10] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:15] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:20] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:25] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:30] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:35] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:40] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:45] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:50] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
[Sep 22 12:31:55] WARNING[4545] chan_zap.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
And this is my problem!
Any ideas are welcome, thanks in advance!
Aron.