Hi everyone,
I config TE110P with E1(PRI) to Telco and receive event on all channel of E1
[color=blue]Detected alarm on channel 1: Yellow Alarm[/color]
So incoming calls or outgoing calls are droped all that alarm sometime 10 minute sometime 30 minute and I cut some logs from asterisk logs to see in this problem.
[color=red]Sep 29 15:08:42 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:08:43 DEBUG[3070]: Exception on 42, channel 2
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 1: Yellow Alarm
Sep 29 15:08:43 NOTICE[3070]: PRI got event: Alarm (4) on Primary D-channel of span 1
Sep 29 15:08:43 WARNING[3070]: No D-channels available! Using Primary on channel anyway 16!
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 3: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: Got event Alarm(4) on channel 2 (index 0)
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 4: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 2: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 5: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 6: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: Didn’t get a frame from channel: Zap/2-1
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 7: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: Bridge stops bridging channels Zap/2-1 and SIP/2822-2b11
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 8: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: update_user_counter(2822) - decrement outUse counter
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 9: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 10: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 11: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 12: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 13: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 14: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 15: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: Exiting with DIALSTATUS=ANSWER.
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 17: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 18: Yellow Alarm
Sep 29 15:08:43 VERBOSE[3070]: == Spawn extension (pstn-pri, toexten, 2) exited non-zero on ‘Zap/2-1’
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 19: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 20: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 21: Yellow Alarm
Sep 29 15:08:43 VERBOSE[3070]: – Executing Hangup(“Zap/2-1”, “”) in new stack
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 22: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 23: Yellow Alarm
Sep 29 15:08:43 VERBOSE[3070]: == Spawn extension (pstn-pri, h, 1) exited non-zero on ‘Zap/2-1’
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 24: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 25: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 26: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: cdr_mysql: inserting a CDR record.
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 27: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: cdr_mysql: SQL command as follows: INSERT INTO cdr (calldate,clid,src,dst,dcontext,channel,dstchannel,lastapp,lastdata,duration,billsec,disposition,amaflags,accountcode) VALUES (‘2005-09-29 14:59:27’,‘22323400’,‘22323400’,‘toexten’,‘pstn-pri’, ‘Zap/2-1’,‘SIP/2822-2b11’,‘Hangup’,’’,556,556,‘ANSWERED’,3,’’)
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 28: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 29: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 30: Yellow Alarm
Sep 29 15:08:43 WARNING[3070]: Detected alarm on channel 31: Yellow Alarm
Sep 29 15:08:43 DEBUG[3070]: Set option AUDIO MODE, value: ON(1) on Zap/2-1
Sep 29 15:08:43 DEBUG[3070]: Hangup: channel: 2 index = 0, normal = 42, callwait = -1, thirdcall = -1
Sep 29 15:08:43 DEBUG[3070]: Set option TDD MODE, value: OFF(0) on Zap/2-1
Sep 29 15:08:43 DEBUG[3070]: Updated conferencing on 2, with 0 conference users
Sep 29 15:08:43 DEBUG[3070]: Set option AUDIO MODE, value: OFF(0) on Zap/2-1
Sep 29 15:08:43 VERBOSE[3070]: – Hungup 'Zap/2-1’
Sep 29 15:08:43 NOTICE[3070]: PRI got event: No more alarm (5) on Primary D-channel of span 1
Sep 29 15:08:43 WARNING[3070]: No D-channels available! Using Primary on channel anyway 16!
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 1
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 2
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 3
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 4
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 5
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 6
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 7
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 8
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 9
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 10
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 11
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 12
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 13
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 14
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 15
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 17
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 18
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 19
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 20
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 21
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 22
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 23
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 24
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 25
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 26
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 27
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 28
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 29
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 30
Sep 29 15:08:43 NOTICE[3070]: Alarm cleared on channel 31
Sep 29 15:09:02 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:09:02 VERBOSE[3070]: – Executing Answer(“Zap/8-1”, “”) in new stack
Sep 29 15:09:02 VERBOSE[3070]: – Accepting call from ‘22323400’ to ‘7302822’ on channel 0/8, span 1
Sep 29 15:09:02 DEBUG[3070]: No echocancellation requested
Sep 29 15:09:02 VERBOSE[3070]: – Executing Ringing(“Zap/8-1”, “”) in new stack
Sep 29 15:09:02 VERBOSE[3070]: – Executing Wait(“Zap/8-1”, “3”) in new stack
Sep 29 15:09:03 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:09:04 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:09:04 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:09:04 NOTICE[3070]: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
Sep 29 15:09:06 VERBOSE[3070]: – Executing SetGlobalVar(“Zap/8-1”, “CalledInfo=7302822”) in new stack
Sep 29 15:09:06 VERBOSE[3070]: – Setting global variable ‘CalledInfo’ to '7302822’
Sep 29 15:09:06 VERBOSE[3070]: – Executing SetGlobalVar(“Zap/8-1”, “CallerInfo=22323400”) in new stack
Sep 29 15:09:06 VERBOSE[3070]: – Setting global variable ‘CallerInfo’ to ‘22323400’
[/color]
and event about HDLC : [color=blue]PRI got event: HDLC Bad FCS[/color] I would like to know about what's happen on this link
*** now My server run Asterisk@Home 1.3 and config of zaptel is below this.
/zapte.conf/
span=1,2,3,ccs,hdb3,crc4
bchan=1-15
dchan=16
/cat /proc/zaptel/1/
Span 1: WCT1/0 “Digium Wildcard TE110P T1/E1 Card 0” HDB3/CCS/CRC4
IRQ misses: 16
1 WCT1/0/1 Clear (In use)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
bchan=17-31
/zapata.conf/
[channels]
language=en
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
callreturn=no
cancallforword=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
immediate=no
callprogress=yes
signalling=pri_cpe
context=pstn-pri
group=1
switchtype=euroisdn
pridialplan=local
prilocaldialplan=national
priindication=outofband
channel => 1-15
channel => 17-31
/* cat /proc/interrupts*/
CPU0 CPU1
0: 935584 929714 IO-APIC-edge timer
1: 21 1 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
4: 5 0 IO-APIC-edge serial
8: 1 0 IO-APIC-edge rtc
12: 19 0 IO-APIC-edge PS/2 Mouse
14: 2 0 IO-APIC-edge ide0
18: 2364648 0 IO-APIC-level usb-uhci, usb-uhci, eth0
19: 0 0 IO-APIC-level usb-uhci, usb-uhci, ehci-hcd
20: 10947 27080 IO-APIC-level libata
24: 5374240 13223624 IO-APIC-level wctdm
27: 13234255 5363316 IO-APIC-level wcte11xp
NMI: 0 0
LOC: 1862385 1862380
ERR: 0
MIS: 0
How do to solve this problem?
Thanks in advance.
Bird.
[bird_aw@yahoo.com](mailto:bird_aw@yahoo.com)