Help outbound calls not working

Hi,

I recently setup my asterisk box and the operator installed the line yesterday. While doing tests i was able to receive calls with caller id info showing up and all. However i cant seem to dial out for some reason. Here is my log.

1 – Making new call for cr 32770
1 – Restarting T203 counter
1 > Protocol Discriminator: Q.931 (8) len=35
1 > Call Ref: len= 2 (reference 2/0x2) (Originator)
1 > Message type: SETUP (5)
1 > [04 03 80 90 a3]
1 > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
1 > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
1 > Ext: 1 User information layer 1: A-Law (35)
1 > [18 03 a1 83 81]
1 > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0
1 > ChanSel: Reserved
1 > Ext: 1 Coding: 0 Number Specified Channel Type: 3
1 > Ext: 1 Channel: 1 ]
1 > [6c 08 21 80 35 38 39 39 39 37]
1 > Calling Number (len=10) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
1 > Presentation: Presentation permitted, user number not screened (0) ‘589997’ ]
1 > [70 07 a1 36 35 30 30 37 30]
1 > Called Number (len= 9) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) ‘650070’ ]
1 > [a1]t*CLI>
1 > Sending Complete (len= 1)
1 q931.c:3637 q931_setup: call 32770 on channel 1 enters state 1 (Call Initiated)
1 – Restarting T203 counter
1 – Restarting T203 counter
1 < Protocol Discriminator: Q.931 (8) len=10
1 < Call Ref: len= 2 (reference 2/0x2) (Terminator)
1 < Message type: CALL PROCEEDING (2)
1 < [18 03 a9 83 81]
1 < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0
1 < ChanSel: Reserved
1 < Ext: 1 Coding: 0 Number Specified Channel Type: 3
1 < Ext: 1 Channel: 1 ]
1 – Processing IE 24 (cs0, Channel Identification)
1 q931.c:4405 q931_receive: call 32770 on channel 1 enters state 3 (Outgoing call Proceeding)
1 – Restarting T203 counter
1 – Restarting T203 counter
1 < Protocol Discriminator: Q.931 (8) len=13
1 < Call Ref: len= 2 (reference 2/0x2) (Terminator)
1 < Message type: DISCONNECT (69)
1 < [08 02 83 81]
1 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Transit network (3)
1 < Ext: 1 Cause: Unallocated (unassigned) number (1), class = Normal Event (0) ]
1 < [1e 02 82 88]
1 < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2)
1 < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ]
1 – Processing IE 8 (cs0, Cause)
1 – Processing IE 30 (cs0, Progress Indicator)
1 q931.c:4558 q931_receive: call 32770 on channel 1 enters state 12 (Disconnect Indication)
1 – Restarting T203 counter
[Mar 3 21:49:02] WARNING[4769]: app_dial.c:787 wait_for_answer: Unable to forward voice or dtmf
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request
1 q931.c:3435 q931_release: call 32770 on channel 1 enters state 19 (Release Request)
1 – Restarting T203 counter
1 > Protocol Discriminator: Q.931 (8) len=9
1 > Call Ref: len= 2 (reference 2/0x2) (Originator)
1 > Message type: RELEASE (77)
1 > [08 02 81 81]
1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
1 > Ext: 1 Cause: Unallocated (unassigned) number (1), class = Normal Event (0) ]
1 – Restarting T203 counter
1 – Restarting T203 counter
1 < Protocol Discriminator: Q.931 (8) len=5
1 < Call Ref: len= 2 (reference 2/0x2) (Terminator)
1 < Message type: RELEASE COMPLETE (90)
1 q931.c:4490 q931_receive: call 32770 on channel 1 enters state 0 (Null)
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
1 – Restarting T203 counter

[Mar 3 21:49:02] WARNING[4393]: chan_dahdi.c:9818 pri_fixup_principle: Call specified, but not found?
1 – Making new call for cr 32771
1 – Restarting T203 counter
1 > Protocol Discriminator: Q.931 (8) len=37
1 > Call Ref: len= 2 (reference 3/0x3) (Originator)
1 > Message type: SETUP (5)
1 > [04 03 80 90 a3]
1 > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
1 > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
1 > Ext: 1 User information layer 1: A-Law (35)
1 > [18 03 a1 83 81]
1 > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0
1 > ChanSel: Reserved
1 > Ext: 1 Coding: 0 Number Specified Channel Type: 3
1 > Ext: 1 Channel: 1 ]
1 > [6c 08 21 80 35 38 39 39 39 37]
1 > Calling Number (len=10) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
1 > Presentation: Presentation permitted, user number not screened (0) ‘589997’ ]
1 > [70 09 a1 30 31 36 35 30 30 37 30]
1 > Called Number (len=11) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) ‘01650070’ ]
1 > [a1]t*CLI>
1 > Sending Complete (len= 1)
1 q931.c:3637 q931_setup: call 32771 on channel 1 enters state 1 (Call Initiated)
1 – Restarting T203 counter
1 – Restarting T203 counter
1 < Protocol Discriminator: Q.931 (8) len=10
1 < Call Ref: len= 2 (reference 3/0x3) (Terminator)
1 < Message type: CALL PROCEEDING (2)
1 < [18 03 a9 83 81]
1 < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0
1 < ChanSel: Reserved
1 < Ext: 1 Coding: 0 Number Specified Channel Type: 3
1 < Ext: 1 Channel: 1 ]
1 – Processing IE 24 (cs0, Channel Identification)
1 q931.c:4405 q931_receive: call 32771 on channel 1 enters state 3 (Outgoing call Proceeding)
1 – Restarting T203 counter
1 – Restarting T203 counter
1 < Protocol Discriminator: Q.931 (8) len=33
1 < Call Ref: len= 2 (reference 3/0x3) (Terminator)
1 < Message type: DISCONNECT (69)
1 < [08 02 82 9f]
1 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2)
1 < Ext: 1 Cause: Normal, unspecified (31), class = Normal Event (1) ]
1 < [1c 0e 91 a1 0b 02 01 1c 06 06 04 00 87 69 01 07]
1 < Facility (len=16, codeset=0) [ 1 0x91, 0xA1, 0x0B, 0x02, 0x01, 0x1C, 0x06, 0x06, 0x04, 0x00, 0x87, ‘i’, 0x01, 0x071 PROTOCOL 11
1 A1 000B1 (CONTEXT SPECIFIC [1])1
1 02 00011 1C1 (INTEGER: 28)1
1 06 00061 041 001 871 691 011 071 (OBJECTIDENTIFIER:1 041 001 871 691 011 071 )1
1 < [1e 02 82 88]
1 < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2)
1 < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ]
1 < [1e 02 82 82]
1 < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2)
1 < Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
1 – Processing IE 8 (cs0, Cause)
1 – Processing IE 28 (cs0, Facility)
1 Handle Q.932 ROSE Invoke component
1 – Processing IE 30 (cs0, Progress Indicator)
1 – Processing IE 30 (cs0, Progress Indicator)
1 q931.c:4558 q931_receive: call 32771 on channel 1 enters state 12 (Disconnect Indication)
1 – Restarting T203 counter
[Mar 3 21:49:12] WARNING[4771]: app_dial.c:787 wait_for_answer: Unable to forward voice or dtmf
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request
1 q931.c:3435 q931_release: call 32771 on channel 1 enters state 19 (Release Request)
1 – Restarting T203 counter
1 > Protocol Discriminator: Q.931 (8) len=9
1 > Call Ref: len= 2 (reference 3/0x3) (Originator)
1 > Message type: RELEASE (77)
1 > [08 02 81 9f]
1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
1 > Ext: 1 Cause: Normal, unspecified (31), class = Normal Event (1) ]
1 – Restarting T203 counter
1 – Restarting T203 counter
1 < Protocol Discriminator: Q.931 (8) len=5
1 < Call Ref: len= 2 (reference 3/0x3) (Terminator)
1 < Message type: RELEASE COMPLETE (90)
1 q931.c:4490 q931_receive: call 32771 on channel 1 enters state 0 (Null)
1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null

Could it be the caller id?

Let me know,

Thanks,

Hrag