I can dial externally but calling in and dial any extensions get voicemail/busy signal. Calling from Phone to Phone get same voicemail/busy. Any ideas?
well we can’t know when you don’t post any relevant info like your extensions.conf and sip.conf
sip.conf
[code]; Note: If your SIP devices are behind a NAT and your Asterisk
; server isn’t, try adding “nat=1” to each peer definition to
; solve translation problems.
[general]
#include sip_general_additional.conf
bindport = 5060 ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
disallow=all
allow=ulaw
allow=alaw
; If you need to answer unauthenticated calls, you should change this
; next line to ‘from-trunk’, rather than ‘from-sip-external’.
; You’ll know this is happening if when you call in you get a message
; saying "The number you have dialed is not in service. Please check the
; number and try again."
context = from-trunk ; Send unknown SIP callers to this context
callerid = Unknown
tos=0x68
; Reported as required for Asterisk 1.4
notifyringing=yes
notifyhold=yes
limitonpeers=yes
; enable and force the sip jitterbuffer. If these settings are desired
; they should be set in the sip_general_custom.conf file as this file
; will get overwritten during reloads and upgrades.
;
; jbenable=yes
; jbforce=yes
; #, in this configuration file, is NOT A COMMENT. This is exactly
; how it should be.
#include sip_general_custom.conf
#include sip_nat.conf
#include sip_registrations_custom.conf
#include sip_registrations.conf
#include sip_custom.conf
#include sip_additional.conf[/code]
extensions.conf
[code]; FreePBX
; Copyright © 2004 Coalescent Systems Inc (Canada)
; Copyright © 2006 Why Pay More 4 Less Pty Ltd (Australia)
; Released under the GNU GPL Licence version 2.
; dialparties.agi (sprackett.com/asterisk/)
; Asterisk::AGI (asterisk.gnuinter.net/)
; gsm (ibiblio.org/pub/Linux/utils/ … short.html)
; loligo sounds (loligo.com/asterisk/sounds/)
; mpg123 (voip-info.org/wiki-Asterisk+conf … nhold.conf)
;************************** -WARNING- ****************************************
; *
; This include file is to be used with extreme caution. In almost all cases *
; any custom dialplan SHOULD be put in extensions_custom.conf which will *
; not hurt freepbx generated dialplan. In some very rare and custom situation *
; users have a need to override what freepbx generates. Anything in this file *
; will do such. *
; *
#include extensions_override_freepbx.conf
; *
;************************** -WARNING- ****************************************
; include extension contexts generated from AMP
#include extensions_additional.conf
; Customizations to this dialplan should be made in extensions_custom.conf
; See extensions_custom.conf.sample for an example
#include extensions_custom.conf
[from-trunk] ; just an alias since VoIP shouldn’t be called PSTN
include => from-pstn
[from-pstn]
include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations
include => ext-did
include => ext-did-catchall ; THIS MUST COME AFTER ext-did
include => from-did-direct ; MODIFICATOIN (PL) for findmefollow if enabled, should be bofore ext-local
exten => fax,1,Goto(ext-fax,in_fax,1)
; MODIFICATION (PL)
;
; Required to assure that direct dids go to personal ring group before local extension.
; This could be auto-generated however I it is prefered to be put here and hard coded
; so that it can be modified if ext-local should take precedence in certain situations.
; will have to decide what to do later.
;
[from-did-direct]
include => ext-findmefollow
include => ext-local
; ############################################################################
; Macros [macro]
; ############################################################################
; Rings one or more extensions. Handles things like call forwarding and DND
; We don’t call dial directly for anything internal anymore.
; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, …
; Use a Macro call such as the following:
; Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,…)
[macro-dial]
exten => s,1,GotoIf($["${MOHCLASS}" = “”]?dial)
exten => s,2,SetMusicOnHold(${MOHCLASS})
exten => s,3(dial),AGI(dialparties.agi)
exten => s,4,NoOp(Returned from dialparties with no extensions to call and DIALSTATUS: ${DIALSTATUS})
exten => s,10,Dial(${ds}) ; dialparties will set the priority to 10 if $ds is not null
exten => s,11,Set(DIALSTATUS=${IF($["${DIALSTATUS_CW}"!="" ]?${DIALSTATUS_CW}:${DIALSTATUS})})
exten => s,20,NoOp(Returned from dialparties with hunt groups to dial )
exten => s,21,Set(HuntLoop=0)
exten => s,22,GotoIf($[${HuntMembers} >= 1]?30 ) ; if this is from rg-group, don’t strip prefix
exten => s,23,NoOp(Returning there are no members left in the hunt group to ring)
exten => s,30,Set(HuntMember=HuntMember${HuntLoop})
exten => s,31,GotoIf($[$["${CALLTRACE_HUNT}" != “” ] & $["${RingGroupMethod}" = “hunt” ]]?32:35 ) ; Set CAll Trace for Hunt member we are going to call
exten => s,32,Set(CT_EXTEN=${CUT(ARG3,$[${HuntLoop} + 1])})
exten => s,33,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,34,Goto(s,42)
exten => s,35,GotoIf($[$["${CALLTRACE_HUNT}" != “” ] & $["${RingGroupMethod}" = “memoryhunt” ]]?36:50 ) ;Set Call Trace for each hunt member we are going to call "Memory groups have multiple members to set CALL TRACE For hence the loop
exten => s,36,Set(CTLoop=0)
exten => s,37,GotoIf($[${CTLoop} > ${HuntLoop}]?42 ) ; if this is from rg-group, don’t strip prefix
exten => s,38,Set(CT_EXTEN=${CUT(ARG3,$[${CTLoop} + 1])})
exten => s,39,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,40,Set(CTLoop=$[1 + ${CTLoop}])
exten => s,41,Goto(s,37)
exten => s,42,Dial(${${HuntMember}}${ds} ) ; dialparties will set the priority to 20 if $ds is not null and its a hunt group
exten => s,43,Set(HuntLoop=$[1 + ${HuntLoop}])
exten => s,44,GotoIf($[$[$[“foo${RingGroupMethod}” != “foofirstavailable”] & $[“foo${RingGroupMethod}” != “foofirstnotonphone”]] | $[“foo${DialStatus}” = “fooBUSY”]]?46)
exten => s,45,Set(HuntMembers=0)
exten => s,46,Set(HuntMembers=$[${HuntMembers} - 1])
exten => s,47,Goto(s,22)
exten => s,50,DBdel(CALLTRACE/${CT_EXTEN})
exten => s,51,Goto(s,42)
; make sure hungup calls go here so that proper cleanup occurs from call confirmed calls and the like
;
exten => h,1,Macro(hangupcall)
; Ring an extension, if the extension is busy or there is no answer send it
; to voicemail
; ARGS: $VMBOX, $EXT
[macro-exten-vm]
exten => s,1,Macro(user-callerid)
exten => s,n,Set(FROMCONTEXT=exten-vm)
exten => s,n,Set(VMBOX=${ARG1})
exten => s,n,Set(EXTTOCALL=${ARG2})
exten => s,n,Set(CFUEXT=${DB(CFU/${EXTTOCALL})})
exten => s,n,Set(CFBEXT=${DB(CFB/${EXTTOCALL})})
exten => s,n,Set(RT=${IF($[$["${VMBOX}"!=“novm”] | $[“foo${CFUEXT}”!=“foo”]]?${RINGTIMER}:"")})
exten => s,n,Macro(record-enable,${EXTTOCALL},IN)
exten => s,n,Macro(dial,${RT},${DIAL_OPTIONS},${EXTTOCALL})
exten => s,n,Set(SV_DIALSTATUS=${DIALSTATUS})
exten => s,n,GosubIf($[$["${SV_DIALSTATUS}"=“NOANSWER”] & $[“foo${CFUEXT}”!=“foo”]]?docfu,1) ; check for CFU in use on no answer
exten => s,n,GosubIf($[$["${SV_DIALSTATUS}"=“BUSY”] & $[“foo${CFBEXT}”!=“foo”]]?docfb,1) ; check for CFB in use on busy
exten => s,n,Set(DIALSTATUS=${SV_DIALSTATUS})
exten => s,n,NoOp(Voicemail is ‘${VMBOX}’)
exten => s,n,GotoIf($["${VMBOX}" = “novm”]?s-${DIALSTATUS},1) ; no voicemail in use for this extension
exten => s,n,NoOp(Sending to Voicemail box ${EXTTOCALL})
exten => s,n,Macro(vm,${VMBOX},${DIALSTATUS})
; Try the Call Forward on No Answer / Unavailable number
exten => docfu,1,Set(RTCFU=${IF($["${VMBOX}"!=“novm”]?${RINGTIMER}:"")})
exten => docfu,n,Dial(Local/${CFUEXT}@from-internal/n,${RTCFU},${DIAL_OPTIONS})
exten => docfu,n,Return
; Try the Call Forward on Busy number
exten => docfb,1,Set(RTCFB=${IF($["${VMBOX}"!=“novm”]?${RINGTIMER}:"")})
exten => docfb,n,Dial(Local/${CFBEXT}@from-internal/n,${RTCFB},${DIAL_OPTIONS})
exten => docfb,n,Return
; Extensions with no Voicemail box reporting BUSY come here
exten => s-BUSY,1,NoOp(Extension is reporting BUSY and not passing to Voicemail)
exten => s-BUSY,n,Playtones(busy)
exten => s-BUSY,n,Busy(20)
; Anything but BUSY comes here
exten => _s-.,1,Playtones(congestion)
exten => _s-.,n,Congestion(10)
;------------------------------------------------------------------------
; [macro-vm]
;------------------------------------------------------------------------
; CONTEXT: macro-vm
; PURPOSE: call voicemail system and extend with personal ivr
;
; Under normal use, this macro will call the voicemail system with the extension and
; desired greeting mode of busy, unavailable or as specified with direct voicemail
; calls (usually unavailable) when entered from destinations.
;
; The voicemail system’s two greetings have been ‘hijacked’ as follows to extend the
; system by giving the option of a private ‘ivr’ for each voicemail user. The following
; applies to both the busy and unavailable modes of voicemail and can be applied to one
; or both, and differently.
;
; Global Defaults:
;
; The following are default values, used in both busy and unavail modes if no specific
; values are specified.
;
; VMX_REPEAT
; The number of times to repeat the users message if no option is pressed.
; VMX_TIMEOUT
; The timeout to wait after playing message before repeating or giving up.
; VMX_LOOPS
; The number of times it should replay the message and check for an option when
; an invalid option is pressed.
;
; VMX_OPTS_DOVM
; Default voicemail option to use if vm is chosen as an option. No options will
; cause Allison’s generic message, ‘s’ will go straight to beep.
; VMX_OPTS_TIMEOUT
; Default voicemail option to use if it times out with no options. No options will
; cause Allison’s generic message, ‘s’ will go straight to beep.
; IF THE USER PRESSES # - it will look like a timeout as well since no option will
; be presented. If the user wishes to enable a mode where a caller can press #
; during their message and it goes straight to voicemail with only a ‘beep’ then
; this should be set to ‘s’.
; VMX_OPTS_LOOPS
; Default voicemail option to use if to many wrong options occur. No options will
; cause Allison’s generic message, ‘s’ will go straight to beep.
;
; VMX_CONTEXT
; Default context for user destinations if not supplied in the user’s settings
; VMX_PRI
; Default priority for user destinations if not supplied in the user’s settings
;
; VMX_TIMEDEST_CONTEXT
; Default context for timeout destination if not supplied in the user’s settings
; VMX_TIMEDEST_EXT
; Default extension for timeout destination if not supplied in the user’s settings
; VMX_TIMEDEST_PRI
; Default priority for timeout destination if not supplied in the user’s settings
;
; VMX_LOOPDEST_CONTEXT
; Default context for loops destination if not supplied in the user’s settings
; VMX_LOOPDEST_EXT
; Default extension for loops destination if not supplied in the user’s settings
; VMX_LOOPDEST_PRI
; Default priority for loops destination if not supplied in the user’s settings
;
;
; The AMPUSER database variable has been extended with a ‘vmx’ tree (vm-extension). A
; duplicate set is included for both unavail and busy. You could choose for to have an
; ivr when unavail is taken, but not with busy - or a different once with busy.
; The full list is below, each specific entry is futher described:
;
; state: Whether teh current mode is enabled or disabled. Anything but ‘enabled’ is
; treated as disabled.
; repeat: This is the number of times that the users message should be played after the
; timeout if the user has not entered anything. It is just a variable to the
; Read() function which will do the repeating.
; timeout: This is how long to wait after the message has been read for a response from
; the user. A caller can enter a digit any time during the playback.
; loops: This is the number of loops that the system will allow a caller to retry if
; they enter a bad menu choice, before going to the loop failover destination
; vmxopts: This is the vm options to send to the voicemail command used when a specific
; voicemail destination is chosen (inidcated by ‘dovm’ in the ext field). This is
; typically either set to ‘s’ or left blank. When set to ‘s’ there will be no
; message played when entering the voicemail, just a beep. When blank, you will
; have Allison’s generic message played. It is not typical to play the greetings
; since they have been ‘hijacked’ for these IVR’s and from a caller’s perspecitive
; this system appears interconnected with the voicemail so instructions can be
; left there.
; timedest: The three variables: ext, context and pri are the goto destination if the caller
; enters no options and it timesout. None have to be set and a system default
; will be used. If just ext is set, then defaults will be used for context and
; pri, etc.
; loopdest: This is identical to timedest but used if the caller exceeds the maximum invalid
; menu choices.
; [0-9*]: The user can specify up to 11 ivr options, all as single digits from 0-9 or . The
; # key can not be used since it is used as a terminator key for the Read command
; and will never be returned. A minimum of the ext must be specified for each valid
; option and as above, the context and priority can also be specified if the default
; is not to be used.
; Option ‘0’ takes on a special meaning. Since a user is able to break out of the
; voicemail command once entering it with a 0, if specified, the 0 destination will
; be used.
; Option '’ can also be used to breakout. It is undecided at this point whether
; providing that option will be used as well. (probably should).
;
;
; /AMPUSER//vmx/[busy|unavail]/state: enabled|disabled
; /AMPUSER//vmx/[busy|unavail]/repeat: n (times to repeat message)
; /AMPUSER//vmx/[busy|unavail]/timeout: n (timeout to wait for digit)
; /AMPUSER//vmx/[busy|unavail]/loops: n (loop returies for invalid entries)
; /AMPUSER//vmx/[busy|unavail]/vmxopts/dovm: vmoptions (if ext is dovm)
; /AMPUSER//vmx/[busy|unavail]/vmxopts/timeout: vmoptions (if timeout)
; /AMPUSER//vmx/[busy|unavail]/vmxopts/loops: vmoptions (if loops)
; /AMPUSER//vmx/[busy|unavail]/timedest/ext: extension (if timeout)
; /AMPUSER//vmx/[busy|unavail]/timedest/context: context (if timeout)
; /AMPUSER//vmx/[busy|unavail]/timedest/pri: priority (if timeout)
; /AMPUSER//vmx/[busy|unavail]/loopdest/ext: extension (if too many failures)
; /AMPUSER//vmx/[busy|unavail]/loopdest/context: context (if too many failures)
; /AMPUSER//vmx/[busy|unavail]/loopdest/pri: priority (if too many failures)
; /AMPUSER//vmx/[busy|unavail]/[0-9*]/ext: extension (dovm for vm access)
; /AMPUSER//vmx/[busy|unavail]/[0-9*]/context: context
; /AMPUSER//vmx/[busy|unavail]/[0-9*]/pri: priority
;------------------------------------------------------------------------
[macro-vm]
; ARG1 - extension
; ARG2 - DIRECTDIAL/BUSY
exten => s,1,Macro(user-callerid,SKIPTTL)
exten => s,n,Set(VMGAIN=${IF($[“foo${VM_GAIN}”!=“foo”]?“g(${VM_GAIN})”:"")})
;
; If BLKVM_OVERRIDE is set, then someone told us to block calls from going to
; voicemail. This variable is reset by the answering channel so subsequent
; transfers will properly function.
;
exten => s,n,GotoIf($[“foo${DB(${BLKVM_OVERRIDE})}” != “fooTRUE”]?vmx,1)
;
; we didn’t branch so block this from voicemail
;
exten => s,n,Noop(CAME FROM: ${NODEST} - Blocking VM cause of key: ${DB(BLKVM_OVERRIDE)})
; If vmx not enabled for the current mode,then jump to normal voicemail behavior
; also - if not message (no-msg) is requested, straight to voicemail
;
exten => vmx,1,GotoIf($["${ARG2}"=“NOMESSAGE”]?s-${ARG2},1)
exten => vmx,n,Set(MODE=${IF($["${ARG2}"=“BUSY”]?busy:unavail)})
exten => vmx,n,GotoIf($["${ARG2}" != “DIRECTDIAL”]?notdirect)
exten => vmx,n,Set(MODE=${IF($["${REGEX("[b]" ${VM_DDTYPE})}" = “1”]?busy:${MODE})})
exten => vmx,n(notdirect),Noop(Checking if ext ${ARG1} is enabled: ${DB(AMPUSER/${ARG1}/vmx/${MODE}/state)})
exten => vmx,n,GotoIf($["${DB(AMPUSER/${ARG1}/vmx/${MODE}/state)}" != “enabled”]?s-${ARG2},1)
; If the required voicemail file does not exist, then abort and go to normal voicemail behavior
;
; TODO: there have been errors using System() with jump to 101 where asterisk works fine at the begining and
; then starts to jump to 101 even on success. This new mode is being tried with the SYSTEM Status which
; returns SUCCESS when the command returned succcessfully with a 0 app return code.
;
exten => vmx,n,Macro(get-vmcontext,${ARG1})
;exten => vmx,n,TrySystem(/bin/ls ${ASTSPOOLDIR}/voicemail/${VMCONTEXT}/${ARG1}/${MODE}.[wW][aA][vV])
exten => vmx,n,AGI(checksound.agi,${ASTSPOOLDIR}/voicemail/${VMCONTEXT}/${ARG1}/${MODE})
exten => vmx,n,GotoIf($["${SYSTEMSTATUS}" != “SUCCESS”]?nofile)
; Get the repeat, timeout and loop times to use if they are overriden form the global settings
;
exten => vmx,n,Set(LOOPCOUNT=0)
exten => vmx,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/repeat)}" = “0”]?vmxtime)
exten => vmx,n,Set(VMX_REPEAT=${DB_RESULT})
exten => vmx,n(vmxtime),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/timeout)}" = “0”]?vmxloops)
exten => vmx,n,Set(VMX_TIMEOUT=${DB_RESULT})
exten => vmx,n(vmxloops),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/loops)}" = “0”]?vmxanswer)
exten => vmx,n,Set(VMX_LOOPS=${DB_RESULT})
exten => vmx,n(vmxanswer),Answer()
; Now play the users voicemail recording as the basis for their ivr, the Read command will repeat as needed and if it timesout
; then we go to the timeout. Otherwise handle invalid options by looping until the limit until a valid option is played.
;
exten => vmx,n(loopstart),Read(ACTION,${ASTSPOOLDIR}/voicemail/${VMCONTEXT}/${ARG1}/${MODE},1,skip,${VMX_REPEAT},${VMX_TIMEOUT})
exten => vmx,n,GotoIf($["${EXISTS(${ACTION})}" = “1”]?checkopt)
; If we are here we timed out, go to the required destination
;
exten => vmx,n(noopt),Noop(Timeout: going to timeout dest)
exten => vmx,n,Set(VMX_OPTS=${VMX_OPTS_TIMEOUT})
exten => vmx,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/vmxopts/timeout)}" = “0”]?chktime)
exten => vmx,n,Set(VMX_OPTS=${DB_RESULT})
exten => vmx,n(chktime),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/timedest/ext)}" = “0”]?dotime)
exten => vmx,n,Set(VMX_TIMEDEST_EXT=${DB_RESULT})
exten => vmx,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/timedest/context)}" = “0”]?timepri)
exten => vmx,n,Set(VMX_TIMEDEST_CONTEXT=${DB_RESULT})
exten => vmx,n(timepri),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/timedest/pri)}" = “0”]?dotime)
exten => vmx,n,Set(VMX_TIMEDEST_PRI=${DB_RESULT})
exten => vmx,n(dotime),Goto(${VMX_TIMEDEST_CONTEXT},${VMX_TIMEDEST_EXT},${VMX_TIMEDEST_PRI})
; We got an option, check if the option is defined, or one of the system defaults
;
exten => vmx,n(checkopt),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/${ACTION}/ext)}" = “1”]?doopt)
exten => vmx,n,GotoIf($["${ACTION}" = “0”]?o,1)
exten => vmx,n,GotoIf($["${ACTION}" = “*”]?adef,1)
; Got invalid option loop until the max
;
exten => vmx,n,Set(LOOPCOUNT=$[${LOOPCOUNT} + 1])
exten => vmx,n,GotoIf($[${LOOPCOUNT} > ${VMX_LOOPS}]?toomany)
exten => vmx,n,Playback(pm-invalid-option&please-try-again)
exten => vmx,n,Goto(loopstart)
; tomany: to many invalid options, go to the specified destination
;
exten => vmx,n(toomany),Noop(Too Many invalid entries, got to invalid dest)
exten => vmx,n,Set(VMX_OPTS=${VMX_OPTS_LOOPS})
exten => vmx,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/vmxopts/loops)}" = “0”]?chkloop)
exten => vmx,n,Set(VMX_OPTS=${DB_RESULT})
exten => vmx,n(chkloop),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/loopdest/ext)}" = “0”]?doloop)
exten => vmx,n,Set(VMX_LOOPDEST_EXT=${DB_RESULT})
exten => vmx,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/loopdest/context)}" = “0”]?looppri)
exten => vmx,n,Set(VMX_LOOPDEST_CONTEXT=${DB_RESULT}) ;TODO make configurable per above
exten => vmx,n(looppri),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/loopdest/pri)}" = “0”]?doloop)
exten => vmx,n,Set(VMX_LOOPDEST_PRI=${DB_RESULT}) ;TODO make configurable per above
exten => vmx,n(doloop),Goto(${VMX_LOOPDEST_CONTEXT},${VMX_LOOPDEST_EXT},${VMX_LOOPDEST_PRI})
; doopt: execute the valid option that was chosen
;
exten => vmx,n(doopt),Noop(Got a valid option: ${DB_RESULT})
exten => vmx,n,Set(VMX_EXT=${DB_RESULT})
;
; Special case, if this option was to go to voicemail, set options and go
;
exten => vmx,n,GotoIf($["${VMX_EXT}" != “dovm”]?getdest)
exten => vmx,n(vmxopts),Set(VMX_OPTS=${VMX_OPTS_DOVM})
exten => vmx,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/vmxopts/dovm)}" = “0”]?vmxdovm)
exten => vmx,n(vmxopts),Set(VMX_OPTS=${DB_RESULT})
exten => vmx,n(vmxdovm),goto(dovm,1)
;
; General case, setup the goto destination and go there (no error checking, its up to the GUI’s to assure
; reasonable values
;
exten => vmx,n(getdest),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/${ACTION}/context)}" = “0”]?vmxpri)
exten => vmx,n,Set(VMX_CONTEXT=${DB_RESULT})
exten => vmx,n(vmxpri),GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/${ACTION}/pri)}" = “0”]?vmxgoto)
exten => vmx,n,Set(VMX_PRI=${DB_RESULT})
exten => vmx,n(vmxgoto),Goto(${VMX_CONTEXT},${VMX_EXT},${VMX_PRI})
; If the required voicemail file is not present, then revert to normal voicemail
; behavior treating as if it was not set
;
exten => vmx,n(nofile),Noop(File for mode: ${MODE} does not exist, SYSTEMSTATUS: ${SYSTEMSTATUS}, going to normal voicemail)
exten => vmx,n,Goto(s-${ARG2},1)
; Drop into voicemail either as a direct destination (in which case VMX_OPTS might be set to something) or
; if the user timed out or broke out of the loop then VMX_OPTS is always cleared such that an Allison
; message is played and the caller know’s what is going on.
;
exten => dovm,1,Noop(VMX Timeout - go to voicemail)
exten => dovm,n,Voicemail(${ARG1}@${VMCONTEXT},${VMX_OPTS}${VMGAIN}) ; no flags, so allison plays please leave …
exten => dovm,n,Goto(exit-${VMSTATUS},1)
exten => s-BUSY,1,NoOp(BUSY voicemail)
exten => s-BUSY,n,Macro(get-vmcontext,${ARG1})
exten => s-BUSY,n,Voicemail(${ARG1}@${VMCONTEXT},${VM_OPTS}b${VMGAIN}) ; Voicemail Busy message
exten => s-BUSY,n,Goto(exit-${VMSTATUS},1)
exten => s-NOMESSAGE,1,NoOp(NOMESSAGE (beeb only) voicemail)
exten => s-NOMESSAGE,n,Macro(get-vmcontext,${ARG1})
exten => s-NOMESSAGE,n,Voicemail(${ARG1}@${VMCONTEXT},${VM_OPTS}${VMGAIN}) ; Voicemail Busy message
exten => s-NOMESSAGE,n,Goto(exit-${VMSTATUS},1)
exten => s-DIRECTDIAL,1,NoOp(DIRECTDIAL voicemail)
exten => s-DIRECTDIAL,n,Macro(get-vmcontext,${ARG1})
exten => s-DIRECTDIAL,n,Voicemail(${ARG1}@${VMCONTEXT},${VM_OPTS}${VM_DDTYPE}${VMGAIN})
exten => s-DIRECTDIAL,n,Goto(exit-${VMSTATUS},1)
exten => _s-.,1,Macro(get-vmcontext,${ARG1})
exten => _s-.,n,Voicemail(${ARG1}@${VMCONTEXT},${VM_OPTS}u${VMGAIN}) ; Voicemail Unavailable message
exten => _s-.,n,Goto(exit-${VMSTATUS},1)
; If the user has a 0 option defined, use that for operator zero-out from within voicemail
; as well to keep it consistant with the menu structure
;
exten => o,1,Background(one-moment-please) ; 0 during vm message will hangup
exten => o,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/0/ext)}" = “0”]?doopdef)
exten => o,n,Set(VMX_OPDEST_EXT=${DB_RESULT})
exten => o,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/0/context)}" = “1”]?opcontext)
exten => o,n,Set(DB_RESULT=${VMX_CONTEXT})
exten => o,n(opcontext),Set(VMX_OPDEST_CONTEXT=${DB_RESULT})
exten => o,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/0/pri)}" = “1”]?oppri)
exten => o,n,Set(DB_RESULT=${VMX_PRI})
exten => o,n(oppri),Set(VMX_OPDEST_PRI=${DB_RESULT})
exten => o,n,Goto(${VMX_OPDEST_CONTEXT},${VMX_OPDEST_EXT},${VMX_OPDEST_PRIORITY})
exten => o,n(doopdef),GotoIf($[“x${OPERATOR_XTN}”=“x”]?nooper:from-internal,${OPERATOR_XTN},1)
exten => o,n(nooper),GotoIf($[“x${FROM_DID}”=“x”]?nodid)
exten => o,n,Dial(Local/${FROM_DID)@from-pstn)
exten => o,n,Macro(hangup)
exten => o,n(nodid),Dial(Local/s@from-pstn)
exten => o,n,Macro(hangup)
; If the user has a * option defined, use that for the * out from within voicemail
; as well to keep it consistant with the menu structure
;
exten => a,1,Macro(get-vmcontext,${ARG1})
exten => a,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}/*/ext)}" = “0”]?adef,1)
exten => a,n,Set(VMX_ADEST_EXT=${DB_RESULT})
exten => a,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}//context)}" = “1”]?acontext)
exten => a,n,Set(DB_RESULT=${VMX_CONTEXT})
exten => a,n(acontext),Set(VMX_ADEST_CONTEXT=${DB_RESULT})
exten => a,n,GotoIf($["${DB_EXISTS(AMPUSER/${ARG1}/vmx/${MODE}//pri)}" = “1”]?apri)
exten => a,n,Set(DB_RESULT=${VMX_PRI})
exten => a,n(apri),Set(VMX_ADEST_PRI=${DB_RESULT})
exten => a,n,Goto(${VMX_ADEST_CONTEXT},${VMX_ADEST_EXT},${VMX_ADEST_PRI})
exten => adef,1,VoiceMailMain(${ARG1}@${VMCONTEXT})
exten => adef,n,Hangup
exten => exit-FAILED,1,Playback(im-sorry&an-error-has-occured)
exten => exit-FAILED,n,Hangup()
exten => exit-SUCCESS,1,Playback(goodbye)
exten => exit-SUCCESS,n,Hangup()
exten => exit-USEREXIT,1,Playback(goodbye)
exten => exit-USEREXIT,n,Hangup()
exten => t,1,Hangup()
;------------------------------------------------------------------------
;------------------------------------------------------------------------
; [macro-simple-dial]
;------------------------------------------------------------------------
; This macro was derived from macro-exten-vm, which is what is normally used to
; ring an extension. It has been simplified and designed to never go to voicemail
; and always return regardless of the DIALSTATUS for any incomplete call.
;
; It’s current primary purpose is to allow findmefollow ring an extension prior
; to trying the follow-me ringgroup that is provided.
;
; Ring an extension, if the extension is busy or there is no answer, return
; ARGS: $EXTENSION, $RINGTIME
;------------------------------------------------------------------------
[macro-simple-dial]
exten => s,1,Macro(user-callerid,SKIPTTL) ; already called from follow-me
; FROMCONTEXT was in the original macro-exten-vm where this macro was derived from. A
; search through all the modules does not come up with any place using this
; variable, but it is left here as a reminder in case there is functionality
; that eventually behaves in a certain way as a result of this variable being set
; and this macro has to masquerade as exten-vm.
;
exten => s,n,Set(EXTTOCALL=${ARG1})
exten => s,n,Set(RT=${ARG2})
exten => s,n,Set(CFUEXT=${DB(CFU/${EXTTOCALL})})
exten => s,n,Set(CFBEXT=${DB(CFB/${EXTTOCALL})})
exten => s,n,Macro(record-enable,${EXTTOCALL},IN)
exten => s,n,Macro(dial,${RT},${DIAL_OPTIONS},${EXTTOCALL})
exten => s,n,Set(PR_DIALSTATUS=${DIALSTATUS})
; if we return, thus no answer, and they have a CFU setting, then we try that next
;
exten => s,n,GosubIf($[$["${PR_DIALSTATUS}"=“NOANSWER”] & $[“foo${CFUEXT}”!=“foo”]]?docfu,1) ; check for CFU in use on no answer
exten => s,n,GosubIf($[$["${PR_DIALSTATUS}"=“BUSY”] & $[“foo${CFBEXT}”!=“foo”]]?docfb,1) ; check for CFB in use on busy
exten => s,n,Set(DIALSTATUS=${PR_DIALSTATUS})
; Nothing yet, then go to the end (which will just return, but in case we decide to do something with certain
; return situations, this is left in.
;
exten => s,n,Goto(s-${DIALSTATUS},1)
; Try the Call Forward on No Answer / Unavailable number.
; We want to try CFU if set, but we want the same ring timer as was set to our call (or do we want the
; system ringtimer? - probably not). Then if no answer there (assuming it doesn’t drop into their vm or
; something we return, which will have the net effect of returning to the followme setup.)
;
; want to avoid going to other follow-me settings here. So check if the CFUEXT is a user and if it is
; then direct it straight to ext-local (to avoid getting intercepted by findmefollow) otherwise send it
; to from-internal since it may be an outside line.
;
exten => docfu,1,GotoIf( $[ “foo${DB(AMPUSER/${CFUEXT}/device)}” = “foo” ]?chlocal)
exten => docfu,n,Dial(Local/${CFUEXT}@ext-local,${RT},${DIAL_OPTIONS})
exten => docfu,n,Return
exten => docfu,n(chlocal),Dial(Local/${CFUEXT}@from-internal/n,${RT},${DIAL_OPTIONS})
exten => docfu,n,Return
; Try the Call Forward on Busy number
exten => docfb,1,GotoIf( $[ “foo${DB(AMPUSER/${CFBEXT}/device)}” = “foo” ]?chlocal)
exten => docfb,n,Dial(Local/${CFBEXT}@ext-local,${RT},${DIAL_OPTIONS})
exten => docfb,n,Return
exten => docfb,n(chlocal),Dial(Local/${CFBEXT}@from-internal/n,${RT},${DIAL_OPTIONS})
exten => docfb,n,Return
; In all cases of no connection, come here and simply return, since the calling dialplan will
; decide what to do next
exten => _s-.,1,NoOp(Extension is reporting ${EXTEN})
;------------------------------------------------------------------------
; get the voicemail context for the user in ARG1
[macro-get-vmcontext]
exten => s,1,Set(VMCONTEXT=${DB(AMPUSER/${ARG1}/voicemail)})
exten => s,2,GotoIf($[“foo${VMCONTEXT}” = “foo”]?200:300)
exten => s,200,Set(VMCONTEXT=default)
exten => s,300,NoOp()
; For some reason, if I don’t run setCIDname, CALLERID(name) will be blank in my AGI
; ARGS: none
[macro-fixcid]
exten => s,1,Set(CALLERID(name)=${CALLERID(name)})
; Ring groups of phones
; ARGS: comma separated extension list
; 1 - Ring Group Strategy
; 2 - ringtimer
; 3 - prefix
; 4 - extension list
[macro-rg-group]
exten => s,1,Macro(user-callerid,SKIPTTL) ; already called from ringgroup
exten => s,2,GotoIf($["${CALLERID(name):0:${LEN(${RGPREFIX})}}" != “${RGPREFIX}”]?4:3) ; check for old prefix
exten => s,3,Set(CALLERID(name)=${CALLERID(name):${LEN(${RGPREFIX})}}) ; strip off old prefix
exten => s,4,Set(RGPREFIX=${ARG3}) ; set new prefix
exten => s,5,Set(CALLERID(name)=${RGPREFIX}${CALLERID(name)}) ; add prefix to callerid name
exten => s,6,Set(RecordMethod=Group) ; set new prefix
exten => s,7,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
exten => s,8,Set(RingGroupMethod=${ARG1}) ;
exten => s,9,Macro(dial,${ARG2},${DIAL_OPTIONS},${ARG4})
exten => s,10,Set(RingGroupMethod=’’) ;
;
; Outgoing channel(s) are busy … inform the client
; but use noanswer features like ringgroups don’t break by being answered
; just to play the message.
;
[macro-outisbusy]
exten => s,1,Playback(all-circuits-busy-now,noanswer)
exten => s,n,Playback(pls-try-call-later,noanswer)
exten => s,n,Macro(hangupcall)
; What to do on hangup.
[macro-hangupcall]
exten => s,1,ResetCDR(w)
exten => s,n,NoCDR()
; Cleanup any remaining RG flag
;
exten => s,n,GotoIf($[ “x${USE_CONFIRMATION}” = “x” | “x${RINGGROUP_INDEX}” = “x” | “${CHANNEL}” != “${UNIQCHAN}”]?skiprg)
exten => s,n,Noop(Cleaning Up Confirmation Flag: RG/${RINGGROUP_INDEX}/${CHANNEL})
exten => s,n,DBDel(RG/${RINGGROUP_INDEX}/${CHANNEL})
; Cleanup any remaining BLKVM flag
;
exten => s,n(skiprg),GotoIf($[ “x${BLKVM_BASE}” = “x” | “BLKVM/${BLKVM_BASE}/${CHANNEL}” != “${BLKVM_OVERRIDE}” ]?skipblkvm)
exten => s,n,Noop(Cleaning Up Block VM Flag: ${BLKVM_OVERRIDE})
exten => s,n,DBDel(${BLKVM_OVERRIDE})
; Cleanup any remaining FollowMe DND flags
;
exten => s,n(skipblkvm),GotoIf($[ “x${FMGRP}” = “x” | “x${FMUNIQUE}” = “x” | “${CHANNEL}” != “${FMUNIQUE}” ]?theend)
exten => s,n,DBDel(FM/DND/${FMGRP}/${CHANNEL})
exten => s,n(theend),Hangup
[macro-faxreceive]
exten => s,1,Set(FAXFILE=${ASTSPOOLDIR}/fax/${UNIQUEID}.tif)
exten => s,2,Set(EMAILADDR=${FAX_RX_EMAIL})
exten => s,3,rxfax(${FAXFILE})
exten => s,103,Set(EMAILADDR=${FAX_RX_EMAIL})
exten => s,104,Goto(3)
; dialout and strip the prefix
[macro-dialout]
exten => s,1,Macro(user-callerid,SKIPTTL)
exten => s,2,GotoIf($["${ECID${CALLERID(number)}}" = “”]?5) ;check for CID override for exten
exten => s,3,Set(CALLERID(all)=${ECID${CALLERID(number)}})
exten => s,4,Goto(7)
exten => s,5,GotoIf($["${OUTCID_${ARG1}}" = “”]?7) ;check for CID override for trunk
exten => s,6,Set(CALLERID(all)=${OUTCID_${ARG1}})
exten => s,7,Set(length=${LEN(${DIAL_OUT_${ARG1}})})
exten => s,8,Dial(${OUT_${ARG1}}/${ARG2:${length}})
exten => s,9,Playtones(congestion)
exten => s,10,Congestion(5)
exten => s,109,Macro(outisbusy)
; dialout using default OUT trunk - no prefix
[macro-dialout-default]
exten => s,1,Macro(user-callerid,SKIPTTL)
exten => s,2,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,3,Macro(outbound-callerid,${ARG1})
exten => s,4,Dial(${OUT}/${ARG1})
exten => s,5,Playtones(congestion)
exten => s,6,Congestion(5)
exten => s,105,Macro(outisbusy)
[macro-dialout-trunk-predial-hook]
; this macro intentially left blank so it may be safely overwritten for any custom
; requirements that an installatin may have.
;
; MACRO RETURN CODE: ${PREDIAL_HOOK_RET}
; if set to “BYPASS” then this trunk will be skipped
;
; dialout using a trunk, using pattern matching (don’t strip any prefix)
; arg1 = trunk number, arg2 = number, arg3 = route password
;
; MODIFIED (PL)
;
; Modified both Dial() commands to include the new TRUNK_OPTIONS from the general
; screen of AMP
;
[macro-dialout-trunk]
exten => s,1,Set(DIAL_TRUNK=${ARG1})
exten => s,n,Set(DIAL_NUMBER=${ARG2})
exten => s,n,Set(ROUTE_PASSWD=${ARG3})
exten => s,n,GotoIf($["${ROUTE_PASSWD}" = “”]?noauth) ; arg3 is pattern password
exten => s,n(auth),Authenticate(${ROUTE_PASSWD})
exten => s,n(noauth),GotoIf($[“x${OUTDISABLE_${ARG1}}” = “xon”]?disabletrunk,1)
; If NODEST is set, clear it. No point in remembering since dialout-trunk will just end in the
; bit bucket. But if answered by an outside line with transfer capability, we want NODEST to be
; clear so a subsequent transfer to an internal extension works and goes to voicmail or other
; destinations.
;
exten => s,n,Set(_NODEST=)
exten => s,n,Set(DIAL_TRUNK_OPTIONS=${DIAL_OPTIONS}) // will be reset to TRUNK_OPTIONS if not intra-company
exten => s,n,Set(GROUP()=OUT_${DIAL_TRUNK})
exten => s,n,Macro(user-callerid,SKIPTTL)
exten => s,n,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,n,GotoIf($["${INTRACOMPANYROUTE}" = “YES”]?skipoutcid) ;Set to YES if treated like internal
exten => s,n,Set(DIAL_TRUNK_OPTIONS=${TRUNK_OPTIONS})
exten => s,n,Macro(outbound-callerid,${DIAL_TRUNK})
exten => s,n(skipoutcid),GotoIf($["${OUTMAXCHANS_${DIAL_TRUNK}}foo" = “foo”]?nomax)
exten => s,n(checkmax),GotoIf($[ ${GROUP_COUNT()} > ${OUTMAXCHANS_${DIAL_TRUNK}} ]?chanfull)
exten => s,n(nomax),AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk
exten => s,n,Set(OUTNUM=${OUTPREFIX_${DIAL_TRUNK}}${DIAL_NUMBER}) ; OUTNUM is the final dial number
exten => s,n,Set(custom=${CUT(OUT_${DIAL_TRUNK},:,1)}) ; Custom trunks are prefixed with “AMP:”
; Back to normal processing, whether intracompany or not.
; But add the macro-setmusic if we don’t want music on this outbound call
;
exten => s,n,GotoIf($[$["${MOHCLASS}" = “default”] | $[“foo${MOHCLASS}” = “foo”]]?gocall) ; Set to YES if we should pump silence
exten => s,n,Set(DIAL_TRUNK_OPTIONS=M(setmusic^${MOHCLASS})${DIAL_TRUNK_OPTIONS}) ; set MoH or off
; This macro call will always be blank and is provided as a hook for customization required prior to making a call
; such as adding SIP header information or other requirements. All the channel variables from above are present
;
exten => s,n,Macro(dialout-trunk-predial-hook)
exten => s,n,GotoIf($["${PREDIAL_HOOK_RET}" = “BYPASS”]?bypass,1)
exten => s,n(gocall),GotoIf($["${custom}" = “AMP”]?customtrunk)
exten => s,n,Dial(${OUT_${DIAL_TRUNK}}/${OUTNUM},300,${DIAL_TRUNK_OPTIONS}) ; Regular Trunk Dial
exten => s,n,Goto(s-${DIALSTATUS},1)
exten => s,n(customtrunk),Set(pre_num=${CUT(OUT_${DIAL_TRUNK},$,1)})
exten => s,n,Set(the_num=${CUT(OUT_${DIAL_TRUNK},$,2)}) ; this is where we expect to find string OUTNUM
exten => s,n,Set(post_num=${CUT(OUT_${DIAL_TRUNK},$,3)})
exten => s,n,GotoIf($["${the_num}" = “OUTNUM”]?outnum:skipoutnum) ; if we didn’t find “OUTNUM”, then skip to Dial
exten => s,n(outnum),Set(the_num=${OUTNUM}) ; replace “OUTNUM” with the actual number to dial
exten => s,n(skipoutnum),Dial(${pre_num:4}${the_num}${post_num},300,${DIAL_TRUNK_OPTIONS})
exten => s,n,Goto(s-${DIALSTATUS},1)
exten => s,n(chanfull),Noop(max channels used up)
exten => s-BUSY,1,NoOp(Dial failed due to trunk reporting BUSY - giving up)
exten => s-BUSY,2,Busy(20)
exten => s-NOANSWER,1,NoOp(Dial failed due to trunk reporting NOANSWER - giving up)
exten => s-NOANSWER,2,Playtones(congestion)
exten => s-NOANSWER,3,Congestion(20)
exten => s-CANCEL,1,NoOp(Dial failed due to trunk reporting CANCEL - giving up)
exten => s-CANCEL,2,Playtones(congestion)
exten => s-CANCEL,3,Congestion(20)
exten => s-.,1,GotoIf($["x${OUTFAIL${ARG1}}" = “x”]?noreport)
exten => s-.,n,AGI(${OUTFAIL${ARG1}})
exten => _s-.,n(noreport),Noop(TRUNK Dial failed due to ${DIALSTATUS} - failing through to other trunks)
exten => disabletrunk,1,Noop(TRUNK: ${OUT_${DIAL_TRUNK}} DISABLED - falling through to next trunk)
exten => bypass,1,Noop(TRUNK: ${OUT_${DIAL_TRUNK}} BYPASSING because dialout-trunk-predial-hook)
exten => h,1,Macro(hangupcall)
; Adds a dynamic agent/member to a Queue
; Prompts for call-back number - in not entered, uses CIDNum
[macro-agent-add]
exten => s,1,Wait(1)
exten => s,2,Macro(user-callerid,SKIPTTL)
exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user
exten => s,4,GotoIf($["${CALLBACKNUM}" = “”]?5:7) ; if user just pressed # or timed out, use cidnum
exten => s,5,Set(CALLBACKNUM=${CALLERID(number)})
exten => s,6,GotoIf($["${CALLBACKNUM}" = “”]?2) ; if still no number, start over
exten => s,7,GotoIf($["${ARG2}" = “”]?9:8) ; arg2 is queue password
exten => s,8,Authenticate(${ARG2})
exten => s,9,AddQueueMember(${ARG1},Local/${CALLBACKNUM}@from-internal/n) ; using chan_local allows us to have agents over trunks
exten => s,10,UserEvent(Agentlogin,Agent: ${CALLBACKNUM})
exten => s,11,Wait(1)
exten => s,12,Playback(agent-loginok)
exten => s,13,Hangup()
; Removes a dynamic agent/member from a Queue
; Prompts for call-back number - in not entered, uses CIDNum
[macro-agent-del]
exten => s,1,Wait(1)
exten => s,2,Macro(user-callerid,SKIPTTL)
exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user
exten => s,4,GotoIf($["${CALLBACKNUM}" = “”]?5:7) ; if user just pressed # or timed out, use cidnum
exten => s,5,Set(CALLBACKNUM=${CALLERID(number)})
exten => s,6,GotoIf($["${CALLBACKNUM}" = “”]?2) ; if still no number, start over
exten => s,7,RemoveQueueMember(${ARG1},Local/${CALLBACKNUM}@from-internal/n)
exten => s,8,UserEvent(RefreshQueue)
exten => s,9,Wait(1)
exten => s,10,Playback(agent-loggedoff)
exten => s,11,Hangup()
; arg1 = trunk number, arg2 = number
[macro-dialout-enum]
; Re-written to use enumlookup.agi
exten => s,1,GotoIf($["${ARG3}" != “”]?PASSWD:NOPASSWD); arg3 is pattern password
exten => s,n(PASSWD),Authenticate(${ARG3})
exten => s,n(NOPASSWD),Macro(user-callerid,SKIPTTL)
exten => s,n,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,n,Macro(outbound-callerid,${ARG1})
exten => s,n,Set(GROUP()=OUT_${ARG1})
exten => s,n,GotoIf($["${OUTMAXCHANS_${ARG1}}foo" = “foo”]?nomax)
exten => s,n,GotoIf($[ ${GROUP_COUNT()} > ${OUTMAXCHANS_${ARG1}} ]?nochans)
exten => s,n(nomax),Set(DIAL_NUMBER=${ARG2})
exten => s,n,Set(DIAL_TRUNK=${ARG1})
exten => s,n,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk
; Replacement for asterisk’s ENUMLOOKUP function
exten => s,n,AGI(enumlookup.agi)
; Now we have the variable DIALARR set to a list of URI’s that can be called, in order of priority
; Loop through them trying them in order.
exten => s,n(dialloop),GotoIf($[“foo${DIALARR}”=“foo”]?end)
exten => s,n,Set(TRYDIAL=${CUT(DIALARR,%,1)})
exten => s,n,Set(DIALARR=${CUT(DIALARR,%,2-)})
exten => s,n,Dial(${TRYDIAL})
exten => s,n,NoOp(Dial exited in macro-enum-dialout with ${DIALSTATUS})
; Now, if we’re still here, that means the Dial failed for some reason.
; If it’s CONGESTION or CHANUNAVAIL we want to try again on a different
; different channel. If there’s no more left, the dialloop tag will exit.
exten => s,n,GotoIf($[ $[ “${DIALSTATUS}” = “CHANUNAVAIL” ] | $[ “${DIALSTATUS}” = “CONGESTION” ] ]?dialloop)
; If we’re here, then it’s BUSY or NOANSWER or something and well, deal with it.
exten => s,n(dialfailed),Goto(s-${DIALSTATUS},1)
; Here are the exit points for the macro.
exten => s,n(nochans),NoOp(max channels used up)
exten => s,n(end),NoOp(Exiting macro-dialout-enum)
exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
exten => s-BUSY,2,Busy(20)
exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})
[macro-record-enable]
exten => s,1,GotoIf($[${LEN(${BLINDTRANSFER})} > 0]?2:4)
exten => s,2,ResetCDR(w)
exten => s,3,StopMonitor()
exten => s,4,AGI(recordingcheck,${STRFTIME(${EPOCH},%Y%m%d-%H%M%S)},${UNIQUEID})
exten => s,5,Noop(No recording needed)
exten => s,999,MixMonitor(${CALLFILENAME}.wav)
;exten => s,3,BackGround(for-quality-purposes)
;exten => s,4,BackGround(this-call-may-be)
;exten => s,5,BackGround(recorded)
; This macro is for dev purposes and just dumps channel/app variables. Useful when designing new contexts.
[macro-dumpvars]
exten => s,1,Noop(ACCOUNTCODE=${ACCOUNTCODE})
exten => s,2,Noop(ANSWEREDTIME=${ANSWEREDTIME})
exten => s,3,Noop(BLINDTRANSFER=${BLINDTRANSFER})
exten => s,4,Noop(CALLERID=${CALLERID(all)})
exten => s,5,Noop(CALLERID(name)=${CALLERID(name)})
exten => s,6,Noop(CALLERID(number)=${CALLERID(number)})
exten => s,7,Noop(CALLINGPRES=${CALLINGPRES})
exten => s,8,Noop(CHANNEL=${CHANNEL})
exten => s,9,Noop(CONTEXT=${CONTEXT})
exten => s,10,Noop(DATETIME=${DATETIME})
exten => s,11,Noop(DIALEDPEERNAME=${DIALEDPEERNAME})
exten => s,12,Noop(DIALEDPEERNUMBER=${DIALEDPEERNUMBER})
exten => s,13,Noop(DIALEDTIME=${DIALEDTIME})
exten => s,14,Noop(DIALSTATUS=${DIALSTATUS})
exten => s,15,Noop(DNID=${DNID})
exten => s,16,Noop(EPOCH=${EPOCH})
exten => s,17,Noop(EXTEN=${EXTEN})
exten => s,18,Noop(HANGUPCAUSE=${HANGUPCAUSE})
exten => s,19,Noop(INVALID_EXTEN=${INVALID_EXTEN})
exten => s,20,Noop(LANGUAGE=${LANGUAGE})
exten => s,21,Noop(MEETMESECS=${MEETMESECS})
exten => s,22,Noop(PRIORITY=${PRIORITY})
exten => s,23,Noop(RDNIS=${RDNIS})
exten => s,24,Noop(SIPDOMAIN=${SIPDOMAIN})
exten => s,25,Noop(SIP_CODEC=${SIP_CODEC})
exten => s,26,Noop(SIPCALLID=${SIPCALLID})
exten => s,27,Noop(SIPUSERAGENT=${SIPUSERAGENT})
exten => s,29,Noop(TXTCIDNAME=${TXTCIDNAME})
exten => s,30,Noop(UNIQUEID=${UNIQUEID})
exten => s,31,Noop(TOUCH_MONITOR=${TOUCH_MONITOR})
exten => s,32,Noop(MACRO_CONTEXT=${MACRO_CONTEXT})
exten => s,33,Noop(MACRO_EXTEN=${MACRO_EXTEN})
exten => s,34,Noop(MACRO_PRIORITY=${MACRO_PRIORITY})
[macro-user-logon]
; check device type
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,2,GotoIf($["${DEVICETYPE}" = “fixed”]?s-FIXED,1)
; get user’s extension
exten => s,3,Set(AMPUSER=${ARG1})
exten => s,4,GotoIf($["${AMPUSER}" = “”]?5:9)
exten => s,5,Playback(please-enter-your)
exten => s,6,Playback(extension)
exten => s,7,Read(AMPUSER,then-press-pound)
; get user’s password and authenticate
exten => s,8,Wait(1)
exten => s,9,Set(AMPUSERPASS=${DB(AMPUSER/${AMPUSER}/password)})
exten => s,10,GotoIf($[${LEN(${AMPUSERPASS})} = 0]?s-NOPASSWORD,1)
; do not continue if the user has already logged onto this device
exten => s,11,Set(DEVICEUSER=${DB(DEVICE/${CALLERID(number)}/user)})
exten => s,12,GotoIf($["${DEVICEUSER}" = “${AMPUSER}”]?s-ALREADYLOGGEDON,1)
exten => s,13,Authenticate(${AMPUSERPASS})
; devices can only be mapped to one user - loggoff anyone else who is here
exten => s,14,Macro(user-logoff)
; map user to device
exten => s,15,Set(AMPUSERDEVICES=${DB(AMPUSER/${AMPUSER}/device)})
exten => s,16,GotoIf($[${LEN(${AMPUSERDEVICES})} = 0]?18)
exten => s,17,Set(AMPUSERDEVICES=${AMPUSERDEVICES}&)
exten => s,18,Set(AMPUSERDEVICES=${AMPUSERDEVICES}${CALLERID(number)})
exten => s,19,Set(DB(AMPUSER/${AMPUSER}/device)=${AMPUSERDEVICES})
; map device to user
exten => s,20,Set(DB(DEVICE/${CALLERID(number)}/user)=${AMPUSER})
; create symlink from dummy device mailbox to user’s mailbox
exten => s,21,System(/bin/ln -s ${ASTSPOOLDIR}/voicemail/default/${AMPUSER}/ ${ASTSPOOLDIR}/voicemail/device/${CALLERID(number)})
exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged into)
exten => s-FIXED,2,Playback(ha/phone)
exten => s-FIXED,3,SayDigits(${CALLERID(number)})
exten => s-FIXED,4,Playback(is-curntly-unavail)
exten => s-FIXED,5,Playback(vm-goodbye)
exten => s-FIXED,6,Hangup ;TODO should play msg indicated device cannot be logged into
exten => s-ALREADYLOGGEDON,1,NoOp(This device has already been logged into by this user)
exten => s-ALREADYLOGGEDON,2,Playback(vm-goodbye)
exten => s-ALREADYLOGGEDON,3,Hangup ;TODO should play msg indicated device is already logged into
exten => s-NOPASSWORD,1,NoOp(This extension does not exist or no password is set)
exten => s-NOPASSWORD,2,Playback(an-error-has-occured)
exten => s-NOPASSWORD,3,Playback(vm-goodbye)
exten => s-NOPASSWORD,4,Hangup ;TODO should play msg indicated device is already logged into
[macro-user-logoff]
; check device type
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,2,GotoIf($["${DEVICETYPE}" = “fixed”]?s-FIXED,1)
; remove entry from user’s DEVICE key
; delete the symlink to user’s voicemail box
exten => s,3,System(rm -f ${ASTSPOOLDIR}/voicemail/device/${CALLERID(number)})
exten => s,4,Set(DEVAMPUSER=${DB(DEVICE/${CALLERID(number)}/user)})
exten => s,5,Set(AMPUSERDEVICES=${DB(AMPUSER/${DEVAMPUSER}/device)})
exten => s,6,AGI(list-item-remove.php,${AMPUSERDEVICES},${CALLERID(number)},AMPUSERDEVICES,&)
; reset user -> device mapping
; users can log onto multiple devices, need to just remove device from value
exten => s,7,Set(DB(AMPUSER/${DEVAMPUSER}/device)=${AMPUSERDEVICES})
; reset device -> user mapping
exten => s,8,Set(DB(DEVICE/${CALLERID(number)}/user)=none)
exten => s,9,Playback(vm-goodbye)
exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged out of)
exten => s-FIXED,2,Playback(an-error-has-occured)
exten => s-FIXED,3,Playback(vm-goodbye)
exten => s-FIXED,4,Hangup ;TODO should play msg indicated device cannot be logged into
[macro-systemrecording]
exten => s,1,Goto(${ARG1},1)
exten => dorecord,1,Record(/tmp/${AMPUSER}-ivrrecording:wav)
exten => dorecord,n,Wait(1)
exten => dorecord,n,Goto(confmenu,1)
exten => docheck,1,Playback(/tmp/${AMPUSER}-ivrrecording)
exten => docheck,n,Wait(1)
exten => docheck,n,Goto(confmenu,1)
exten => confmenu,1,Background(to-listen-to-it&press-1&to-rerecord-it&press-star,m,${LANGUAGE},macro-systemrecording)
exten => confmenu,n,Read(RECRESULT,1,4)
exten => confmenu,n,GotoIf($[“x${RECRESULT}”=“x*”]?dorecord,1)
exten => confmenu,n,GotoIf($[“x${RECRESULT}”=“x1”]?docheck,1)
exten => confmenu,n,Goto(1)
exten => 1,1,Goto(docheck,1)
exten => *,1,Goto(dorecord,1)
exten => t,1,Playback(goodbye)
exten => t,n,Hangup
exten => i,1,Playback(pm-invalid-option)
exten => i,n,Goto(confmenu,1)
exten => h,1,Hangup
;
; ############################################################################
; CallerID Handling
;
; ############################################################################
; CallerID Handling
; ############################################################################
;sets the callerid of the device to that of the logged in user
;
; ${AMPUSER} is set upon return to the real user despite any aliasing that may
; have been set as a result of the AMPUSER//cidnum field. This is used by
; features like DND, CF, etc. to set the proper structure on aliased instructions
;
[macro-user-callerid]
exten => s,1,Noop(user-callerid: ${CALLERID(name)} ${CALLERID(number)})
; make sure AMPUSER is set if it doesn’t get set below
;
exten => s,n,Set(AMPUSER=${IF($[“foo${AMPUSER}” = “foo”]?${CALLERID(number)}:${AMPUSER})})
exten => s,n,GotoIf($["${CHANNEL:0:5}" = “Local”]?report)
exten => s,n,GotoIf($["${REALCALLERIDNUM:1:2}" != “”]?start)
exten => s,n,Set(REALCALLERIDNUM=${CALLERID(number)})
exten => s,n(start),NoOp(REALCALLERIDNUM is ${REALCALLERIDNUM})
exten => s,n,Set(AMPUSER=${DB(DEVICE/${REALCALLERIDNUM}/user)})
exten => s,n,Set(AMPUSERCIDNAME=${DB(AMPUSER/${AMPUSER}/cidname)})
exten => s,n,GotoIf($[“x${AMPUSERCIDNAME:1:2}” = “x”]?report)
; user may masquerade as a different user internally, so set the internal cid as indicated
; but keep the REALCALLERID which is used to determine their true identify and lookup info
; during outbound calls.
;
exten => s,n,Set(AMPUSERCID=${IF($["${DB_EXISTS(AMPUSER/${AMPUSER}/cidnum)}" = “1”]?${DB_RESULT}:${AMPUSER})})
exten => s,n,Set(CALLERID(all)="${AMPUSERCIDNAME}" <${AMPUSERCID}>)
exten => s,n,Set(REALCALLERIDNUM=${DB(DEVICE/${REALCALLERIDNUM}/user)})
exten => s,n(report),Noop(TTL: ${TTL} ARG1: ${ARG1})
exten => s,n,GotoIf($[ “${ARG1}” = “SKIPTTL” ]?continue)
exten => s,n(report2),Set(__TTL=${IF($[“foo${TTL}” = “foo”]?64:$[ ${TTL} - 1 ])})
exten => s,n,GotoIf($[ ${TTL} > 0 ]?continue)
exten => s,n,Wait(${RINGTIMER}) ; wait for a while, to give it a chance to be picked up by voicemail
exten => s,n,Answer()
exten => s,n,Wait(2)
exten => s,n,Playback(im-sorry&an-error-has-occured&with&call-forwarding)
exten => s,n,Macro(hangupcall)
exten => s,n,Congestion()
exten => s,n(continue),NoOp(Using CallerID ${CALLERID(all)})
exten => h,1,Macro(hangupcall)
; overrides callerid out trunks
; arg1 is trunk
; macro-user-callerid should be called before using this macro
[macro-outbound-callerid]
; Keep the original CallerID number, for failover to the next trunk.
exten => s,1,GotoIf($["${REALCALLERIDNUM:1:2}" != “”]?start)
exten => s,n,Set(REALCALLERIDNUM=${CALLERID(number)})
exten => s,n(start),NoOp(REALCALLERIDNUM is ${REALCALLERIDNUM})
; If this came through a ringgroup or CF, then we want to retain original CID unless
; OUTKEEPCID_${trunknum} is set.
;
exten => s,n,GotoIf($["${KEEPCID}" != “TRUE”]?normcid) ;Set to TRUE if coming from ringgroups, CF, etc.
exten => s,n,GotoIf($[“x${OUTKEEPCID_${ARG1}}” = “xon”]?normcid)
exten => s,n,GotoIf($[“foo${REALCALLERIDNUM}” = “foo”]?normcid) ;if not set to anything, go through normal processing
exten => s,n,Set(USEROUTCID=${REALCALLERIDNUM})
; We now have to make sure the CID is valid. If we find an AMPUSER with the same CID, we assume it is an internal
; call (would be quite a conincidence if not) and go through the normal processing to get that CID. If a device
; is set for this CID, then it must be internal
;
exten => s,n,GotoIf($[“foo${DB(AMPUSER/${REALCALLERIDNUM}/device)}” = “foo”]?bypass:normcid)
exten => s,n(normcid),Set(USEROUTCID=${DB(AMPUSER/${REALCALLERIDNUM}/outboundcid)})
exten => s,n(bypass),Set(EMERGENCYCID=${DB(DEVICE/${REALCALLERIDNUM}/emergency_cid)})
exten => s,n,Set(TRUNKOUTCID=${OUTCID_${ARG1}})
exten => s,n,GotoIf($["${EMERGENCYROUTE:1:2}" = “”]?trunkcid) ; check EMERGENCY ROUTE
exten => s,n,GotoIf($["${EMERGENCYCID:1:2}" = “”]?trunkcid) ; empty EMERGENCY CID, so default back to trunk
exten => s,n,Set(CALLERID(all)=${EMERGENCYCID}) ; emergency cid for device
exten => s,n,Goto(report)
exten => s,n(trunkcid),GotoIf($["${TRUNKOUTCID:1:2}" = “”]?usercid) ;check for CID override for trunk (global var)
exten => s,n,Set(CALLERID(all)=${TRUNKOUTCID})
exten => s,n(usercid),GotoIf($["${USEROUTCID:1:2}" = “”]?report) ; check CID override for extension
exten => s,n,Set(CALLERID(all)=${USEROUTCID})
exten => s,n,GotoIf($[“x${CALLERID(name)}”!=“xhidden”]?report:hidecid) ; check CID blocking for extension
exten => s,n(hidecid),SetCallerPres(prohib_passed_screen) ; Only works with ISDN (T1/E1/BRI)
exten => s,n(report),NoOp(CallerID set to ${CALLERID(all)})
; Privacy Manager Macro makes sure that any calls that don’t pass the privacy manager are presented
; with congestion since there have been observed cases of the call continuing if not stopped with a
; congestion, and this provides a slightly more friendly ‘sorry’ message in case the user is
; legitamately trying to be cooperative.
;
; Note: the following options are configurable in privacy.conf:
;
; maxretries = 3 ; default value, number of retries before failing
; minlength = 10 ; default value, number of digits to be accepted as valid CID
;
[macro-privacy-mgr]
exten => s,1,Set(KEEPCID=${CALLERID(num)})
exten => s,n,GotoIf($[“foo${CALLERID(num):0:1}”=“foo+”]?CIDTEST2:CIDTEST1)
exten => s,n(CIDTEST1),Set(TESTCID=${MATH(1+${CALLERID(num)})})
exten => s,n,Goto(TESTRESULT)
exten => s,n(CIDTEST2),Set(TESTCID=${MATH(1+${CALLERID(num):1})})
exten => s,n(TESTRESULT),GotoIf($[“foo${TESTCID}”=“foo”]?CLEARCID:PRIVMGR)
exten => s,n(CLEARCID),Set(CALLERID(num)=)
exten => s,n(PRIVMGR),PrivacyManager()
exten => s,n,GotoIf($["${PRIVACYMGRSTATUS}"=“FAILED”]?fail)
exten => s,n,SetCallerPres(allowed_passed_screen); stop gap until app_privacy.c clears unavailble bit
exten => s,PRIVMGR+101(fail),Noop(STATUS: ${PRIVACYMGRSTATUS} CID: ${CALLERID(num)} ${CALLERID(name)} CALLPRES: ${CALLLINGPRES})
exten => s,n,Playback(sorry-youre-having-problems)
exten => s,n,Playback(goodbye)
exten => s,n,Playtones(congestion)
exten => s,n,Congestion(5)
; Text-To-Speech related macros
; These all follow common actions. First try to playback a file “tts/custom-md5”
; where “md5” is the md5() of whatever is going to be played. If that doesn’t exist,
; try to playback using macro-tts-sayXXXXX (where XXXXX is text/digits/etc, same as
; the macro below). If that macro exits with MACRO_OFFSET=100, then it’s done,
; therwise, fallback to the default asterisk method.
;
; say text is purely for text-to-speech, there is no fallback
[macro-saytext]
exten => s,1,Noop(Trying custom SayText playback for “${ARG1}”)
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"=“SUCCESS”]?done)
; call tts-saytext. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saytext,${ARG1},${ARG2},${ARG3})
exten => s,n,Noop(No text-to-speech handler for SayText, cannot say “${ARG1}”)
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled saytext)
; say name is for saying names typically, but fallsback to using SayAlpha
; (saying the word letter-by-letter)
[macro-sayname]
exten => s,1,Noop(Trying custom SayName playback for “${ARG1}”)
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"=“SUCCESS”]?done)
; call tts-sayalpha. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-sayalpha,${ARG1},${ARG2},${ARG3})
exten => s,n,SayAlpha(${ARG1})
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled sayname)
; Say number is for saying numbers (eg “one thousand forty six”)
[macro-saynumber]
exten => s,1,Noop(Trying custom SayNumber playback for “${ARG1}”)
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"=“SUCCESS”]?done)
; call tts-saynumber. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saynumber,${ARG1},${ARG2},${ARG3})
exten => s,n,SayNumber(${ARG1})
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled saynumber)
; Say digits is for saying digits one-by-one (eg, “one zero four six”)
[macro-saydigits]
exten => s,1,Noop(Trying custom SayDigits playback for “${ARG1}”)
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"=“SUCCESS”]?done)
; call tts-saydigits. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saydigits,${ARG1},${ARG2},${ARG3})
exten => s,n,SayDigits(${ARG1})
exten => s,n,Goto(done)
;
; ############################################################################
; Inbound Contexts [from]
; ############################################################################
[from-sip-external]
;give external sip users congestion and hangup
; Yes. This is really meant to be _. - I know asterisk whinges about it, but
; I do know what I’m doing. This is correct.
exten => _.,1,NoOp(Received incoming SIP connection from unknown peer to ${EXTEN})
exten => _.,n,Set(DID=${IF($["${EXTEN:1:2}"=""]?s:${EXTEN})})
exten => _.,n,Goto(s,1)
exten => s,1,GotoIf($["${ALLOW_SIP_ANON}"=“yes”]?from-trunk,${DID},1)
exten => s,n,Set(TIMEOUT(absolute)=15)
exten => s,n,Answer
exten => s,n,Wait(2)
exten => s,n,Playback(ss-noservice)
exten => s,n,Playtones(congestion)
exten => s,n,Congestion(5)
exten => h,1,NoOp(Hangup)
exten => i,1,NoOp(Invalid)
exten => t,1,NoOp(Timeout)
[from-internal-xfer]
; applications are now mostly all found in from-internal-additional in _custom.conf
include => parkedcalls
include => from-internal-custom
;allow phones to dial other extensions
include => ext-fax
;allow phones to access generated contexts
;
; MODIFIED (PL)
;
; Currently the include for findmefollow is being auto-generated before ext-local which is the desired behavior.
; However, I haven’t been able to do anything that I know of to force this. We need to determine if it should
; be hardcoded into here to make sure it doesn’t change with some configuration. For now I will leave it out
; until we can discuss this.
;
include => ext-local-confirm
include => findmefollow-ringallv2
include => from-internal-additional
; This causes grief with ‘#’ transfers, commenting out for the moment.
; include => bad-number
exten => s,1,Macro(hangupcall)
exten => h,1,Macro(hangupcall)
[from-internal]
include => from-internal-xfer
include => bad-number
[from-zaptel]
exten => _X.,1,Set(DID=${EXTEN})
exten => _X.,n,Goto(s,1)
exten => s,1,NoOp(Entering from-zaptel with DID == ${DID})
; Some trunks require a RINGING be sent before an Answer.
exten => s,n,Ringing()
; If ($did == “”) { $did = “s”; }
exten => s,n,Set(DID=${IF($["${DID}"= “”]?s:${DID})})
exten => s,n,NoOp(DID is now ${DID})
exten => s,n,GotoIf($["${CHANNEL:0:3}"=“Zap”]?zapok:notzap)
exten => s,n(notzap),Goto(from-pstn,${DID},1)
; If there’s no ext-did,s,1, that means there’s not a no did/no cid route. Hangup.
exten => s,n,Macro(hangup)
exten => s,n(zapok),NoOp(Is a Zaptel Channel)
exten => s,n,Set(CHAN=${CHANNEL:4})
exten => s,n,Set(CHAN=${CUT(CHAN,-,1)})
exten => s,n,Macro(from-zaptel-${CHAN},${DID},1)
; If nothing there, then treat it as a DID
exten => s,n,NoOp(Returned from Macro from-zaptel-${CHAN})
exten => s,n,Goto(from-pstn,${DID},1)
exten => fax,1,Goto(ext-fax,in_fax,1)
;------------------------------------------------------------------------
; [macro-setmusic]
;------------------------------------------------------------------------
; CONTEXT: macro-setmusic
; PURPOSE: to turn off moh on routes where it is not desired
;
;------------------------------------------------------------------------
[macro-setmusic]
exten => s,1,NoOp(Setting Outbound Route MoH To: ${ARG1})
exten => s,2,SetMusicOnHold(${ARG1})
;------------------------------------------------------------------------
; ##########################################
; ## Ring Groups with Confirmation macros ##
; ##########################################
; Used by followme and ringgroups
;------------------------------------------------------------------------
; [macro-dial-confirm]
;------------------------------------------------------------------------
; This has now been incorporated into dialparties. It still only works with ringall
; and ringall-prim strategies. Have not investigated why it doesn’t work with
; hunt and memory hunt.
;
;------------------------------------------------------------------------
[macro-dial-confirm]
; This was written to make it easy to use macro-dial-confirm instead of macro-dial in generated dialplans.
; This takes the same paramaters, with an additional paramater of the ring group Number
; ARG1 is the timeout
; ARG2 is the DIAL_OPTIONS
; ARG3 is a list of xtns to call - 203-222-240-123123123#-211
; ARG4 is the ring group number
; This sets a unique value to indicate that the channel is ringing. This is used for warning slow
; users that the call has already been picked up.
;
exten => s,1,Set(DB(RG/${ARG4}/${CHANNEL})=RINGING)
; We need to keep that channel variable, because it’ll change when we do this dial, so set it to
; fallthrough to every sibling.
;
exten => s,n,Set(__UNIQCHAN=${CHANNEL})
; The calling ringgroup should have set RingGroupMethod appropriately. We need to set two
; additional parameters:
;
; USE_CONFIRMATION, RINGGROUP_INDEX
;
; Thse are passed to inform dialparties to place external calls through the [grps] context
;
exten => s,n,Set(USE_CONFIRMATION=TRUE)
exten => s,n,Set(RINGGROUP_INDEX=${ARG4})
exten => s,n,Set(ARG4=) ; otherwise it gets passed to dialparties.agi which processes it (prob bug)
exten => s,n,Macro(dial,${ARG1},${ARG2},${ARG3})
; delete the variable, if we are here, we are done trying to dial and it may have been left around
;
exten => s,n,DBDel(RG/${RINGGROUP_INDEX}/${CHANNEL})
exten => s,n,Set(USE_CONFIRMATION=)
exten => s,n,Set(RINGGROUP_INDEX=)
;------------------------------------------------------------------------
;------------------------------------------------------------------------
; [macro-auto-confirm]
;------------------------------------------------------------------------
; This macro is called from ext-local-confirm to auto-confirm a call so that other extensions
; are aware that the call has been answered.
;
;------------------------------------------------------------------------
[macro-auto-confirm]
exten => s,1,Set(__MACRO_RESULT=)
exten => s,n,DBDel(${BLKVM_OVERRIDE})
exten => s,n,DBDel(RG/${ARG1}/${UNIQCHAN})
;------------------------------------------------------------------------
; [macro-auto-blkvm]
;------------------------------------------------------------------------
; This macro is called for any extension dialed form a queue, ringgroup
; or followme, so that the answering extension can clear the voicemail block
; override allow subsequent transfers to properly operate.
;
;------------------------------------------------------------------------
[macro-auto-blkvm]
exten => s,1,Set(__MACRO_RESULT=)
exten => s,n,DBDel(${BLKVM_OVERRIDE})
;------------------------------------------------------------------------
; [ext-local-confirm]
;------------------------------------------------------------------------
; If call confirm is being used in a ringgroup, then calls that do not require confirmation are sent
; to this extension instead of straight to the device.
;
; The sole purpose of sending them here is to make sure we run Macro(auto-confirm) if this
; extension answers the line. This takes care of clearing the database key that is used to inform
; other potential late comers that the extension has been answered by someone else.
;
; ALERT_INFO is deprecated in Asterisk 1.4 but still used throughout the FreePBX dialplan and
; usually set by dialparties.agi. This allows ineritance. Since no dialparties.agi here, set the
; header if it is set.
;
;------------------------------------------------------------------------
[ext-local-confirm]
exten => _LC-.,1,Noop(IN ext-local-confirm with - RT: ${RT}, RG_IDX: ${RG_IDX})
exten => _LC-.,n,GotoIf($[“x${ALERT_INFO}”=“x”]?godial)
exten => _LC-.,n,SIPAddHeader(Alert-Info: ${ALERT_INFO})
exten => _LC-.,n(godial),dial(${DB(DEVICE/${EXTEN:3}/dial)},${RT},M(auto-confirm^${RG_IDX})${DIAL_OPTIONS})
;------------------------------------------------------------------------
; [macro-confirm]
;------------------------------------------------------------------------
; CONTEXT: macro-confirm
; PURPOSE: added default message if none supplied
;
; Follom-Me and Ringgroups provide an option to supply a message to be
; played as part of the confirmation. These changes have added a default
; message if none is supplied.
;
;------------------------------------------------------------------------
[macro-confirm]
exten => s,1,Set(LOOPCOUNT=0)
exten => s,n,Noop(CALLCONFIRMCID: ${CALLCONFIRMCID})
; We set ABORT rather than CONTINUE, as we want the server to forget about this channel
; if it’s declined, hung up, or timed out. We don’t want it to continue on to the next
; step in the dialplan, which could be anything!
exten => s,n,Set(__MACRO_RESULT=ABORT)
; ARG1 is the announcement to play to tell the user that they’ve got a call they need
; to confirm. Something along the lines of 'You have an incoming call. Press 1 to accept, 9 to reject’
exten => s,n,Set(MSG1=${IF($[“foo${ARG1}” != “foo”]?${ARG1}:“incoming-call-1-accept-2-decline”)})
exten => s,n(start),Read(INPUT,${MSG1},1,1,5)
; So. We’ve now read something, or nothing. We should check to make sure that the call hasn’t
; already been answered by someone else. If it has, send this call to toolate
exten => s,n,GotoIf(${DB_EXISTS(RG/${ARG3}/${UNIQCHAN})}?check:toolate)
; We passed that test, so it means the call hasn’t been answered. Has this user pushed 1? If so,
; then go to OK.
exten => s,n(check),GotoIf($["${INPUT}"=“1”]?ok)
; If they’ve pushed 9, then they definately don’t want the call. Just pretend there was no response
; and go to noanswer (or 2 since that will be default for asterisk)
exten => s,n,GotoIf($["${INPUT}"=“9”]?noanswer)
exten => s,n,GotoIf($["${INPUT}"=“2”]?noanswer)
exten => s,n,GotoIf($["${INPUT}"=“3”]?playcid)
; Increment LOOPCOUNT, and check to make sure we haven’t played it 5 times by now. We assume that
; the person is able to push ‘1’ in a reasonably short time.
exten => s,n,Set(LOOPCOUNT=$[ ${LOOPCOUNT} + 1 ])
exten => s,n,GotoIf($[ ${LOOPCOUNT} < 5 ]?start)
; If we’re here, that means we’ve played it MORE than 5 times. Set __MACRO_RESULT=ABORT, well, just
; coz, and goto fin, which is the last line, meaning it returns to the previous Dial, and pretends as
; if nothing has happened.
exten => s,n(noanswer),Set(__MACRO_RESULT=ABORT)
exten => s,n,Goto(fin)
; Test play callerid
;
exten => s,n(playcid),Noop(Playing CID: ${CALLCONFIRMCID})
exten => s,n,SayDigits(${CALLCONFIRMCID})
exten => s,n,Goto(start)
; If we’re here, it’s because the call was already accepted by someone else.
exten => s,n(toolate),Set(MSG2=${IF($[“foo${ARG2}” != “foo”]?${ARG2}:“incoming-call-no-longer-avail”)})
exten => s,n,Playback(${MSG2})
exten => s,n,Goto(noanswer)
; If we made it here, it’s because the call WAS accepted, AND it’s still ringing. We delete the
; database entry (so that the DB_EXISTS line above will trigger a ‘toolate’ jump), and set the
; MACRO_RESULT variable to NOTHING. This is the magic string that joins both legs of the call together
exten => s,n(ok),DBDel(RG/${ARG3}/${UNIQCHAN})
exten => s,n,DBDel(${BLKVM_OVERRIDE})
exten => s,n,Set(__MACRO_RESULT=)
; The end.
exten => s,n(fin),NoOp(Finished)
exten => h,1,Noop(Hangup Extension in macro-confirm)
exten => h,n,Macro(hangupcall)
;------------------------------------------------------------------------
;------------------------------------------------------------------------
; [findmefollow-ringallv2]
;------------------------------------------------------------------------
; This context, to be included in from-internal, implements the PreRing part of findmefollow
; as well as the GroupRing part. It also communicates between the two so that if DND is set
; on the primary extension, and mastermode is enabled, then the other extensions will not ring
;
;------------------------------------------------------------------------
[findmefollow-ringallv2]
exten => _FMPR-.,1,Noop(In FMPR ${FMGRP} with ${EXTEN:5})
exten => _FMPR-.,n,Set(RingGroupMethod=)
exten => _FMPR-.,n,Set(USE_CONFIRMATION=)
exten => _FMPR-.,n,Set(RINGGROUP_INDEX=)
exten => _FMPR-.,n,Macro(simple-dial,${EXTEN:5},${FMREALPRERING})
exten => _FMPR-.,n,GotoIf($["${DIALSTATUS}" != “BUSY”]?nodnd)
exten => _FMPR-.,n,Set(DB(FM/DND/${FMGRP}/${FMUNIQUE})=DND)
exten => _FMPR-.,n(nodnd),Noop(Ending FMPR ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMPR-.,n,Hangup()
exten => _FMGL-.,1,Noop(In FMGL ${FMGRP} with ${EXTEN:5})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = “DND”]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = “DND”]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = “DND”]?dodnd)
exten => _FMGL-.,n,Wait(${FMPRERING})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = “DND”]?dodnd)
exten => _FMGL-.,n,DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n(dodial),Macro(dial,${FMGRPTIME},${DIAL_OPTIONS},${EXTEN:5})
exten => _FMGL-.,n,Noop(Ending FMGL ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMGL-.,n,Hangup()
exten => _FMGL-.,n+10(dodnd),DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n,GotoIf($["${FMPRIME}" = “FALSE”]?dodial)
exten => _FMGL-.,n,Noop(Got DND in FMGL ${FMGRP} with ${EXTEN:5} in ${RingGroupMethod} mode, aborting)
exten => _FMGL-.,n,Hangup()
;------------------------------------------------------------------------
; ############################################################################
; Extension Contexts [ext]
; ############################################################################
[ext-fax]
exten => s,1,Answer
exten => s,2,Goto(in_fax,1)
exten => in_fax,1,StopPlayTones
exten => in_fax,2,GotoIf($["${FAX_RX}" = “system”]?3:analog_fax,1)
exten => in_fax,3,Macro(faxreceive)
exten => in_fax,4,Hangup
exten => analog_fax,1,GotoIf($["${FAX_RX}" = “disabled”]?4:2) ;if fax is disabled, just hang up
exten => analog_fax,2,Set(DIAL=${DB(DEVICE/${FAX_RX}/dial)});
exten => analog_fax,3,Dial(${DIAL},20,d)
exten => analog_fax,4,Hangup
;exten => out_fax,1,wait(7)
exten => out_fax,1,txfax(${TXFAX_NAME},caller)
exten => out_fax,2,Hangup
exten => h,1,system(/var/lib/asterisk/bin/fax-process.pl --to ${EMAILADDR} --from ${FAX_RX_FROM} --subject “Fax from ${URIENCODE(${CALLERID(number)})} ${URIENCODE(${CALLERID(name)})}” --attachment fax_${URIENCODE(${CALLERID(number)})}.pdf --type application/pdf --file ${FAXFILE});
exten => h,2,Hangup()
;this is where parked calls go if they time-out. Should probably re-ring
[default]
include => ext-local
exten => s,1,Playback(vm-goodbye)
exten => s,2,Macro(hangupcall)
unistim.conf
[code]
[general]
port=5000 ; UDP port
;keepalive=120 ; in seconds, default = 120
;public_ip= ; if asterisk is behind a nat, specify your public IP
autoprovisioning=yes ; Allow undeclared phones to register an extension. See README for important
; informations. no (default), yes, tn.
;[black] ; name of the device
;device=000ae4012345 ; mac address of the phone
;rtp_port=10000 ; RTP port used by the phone, default = 10000. RTCP = rtp_port+1
;rtp_method=0 ; If you don’t have sound, you can try 1, 2 or 3, default = 0
;status_method=0 ; If you don’t see status text, try 1, default = 0
;titledefault=Asterisk ; default = “TimeZone (your time zone)”. 12 characters max
;maintext0=“you can insert” ; default = “Welcome”, 24 characters max
;maintext1=“a custom text” ; default = the name of the device, 24 characters max
;maintext2="(main page)" ; default = the public IP of the phone, 24 characters max
;dateformat=1 ; 0 = month/day, 1 (default) = day/month
;timeformat=1 ; 0 = 0:00am ; 1 (default) = 0h00, 2 = 0:00
;contrast=8 ; define the contrast of the LCD. From 0 to 15. Default = 8
;country=us ; country (ccTLD) for dial tone frequency. See README, default = us
;ringvolume=2 ; ring volume : 0,1,2,3, can be overrided by Dial(), default = 2
;ringstyle=3 ; ring style : 0 to 7, can be overrided by Dial(), default = 3
;callhistory=1 ; 0 = disable, 1 = enable call history, default = 1
;callerid=“Customer Support” <555-234-5678>
;context=default ; context, default=“default”
;mailbox=1234 ; Specify the mailbox number. Used by Message Waiting Indication
;linelabel=“Support” ; Softkey label for the next line=> entry, 9 char max.
;extension=none ; Add an extension into the dialplan. Only valid in context specified previously.
; none=don’t add (default), ask=prompt user, line=use the line number
;line => 100 ; Only one line by device is currently supported.
; Beware ! only bookmark and softkey entries are allowed after line=>
;bookmark=Hans C.@123 ; Use a softkey to dial 123. Name : 9 char max
;bookmark=Mailbox@011@54 ; 54 shows a mailbox icon. See #define FAV_ICON_ for other values (32 to 63)
;bookmark=Test@*@USTM/violet ; Display an icon if violet is connected (dynamic), only for unistim device
;bookmark=4@Pager@54321@51 ; Display a pager icon and dial 54321 when softkey 4 is pressed
[Brian]
device=0016cafxxxxx
rtp_port=10000
rtp_method=3
maintext0="Brian Kearney"
maintext2="1006"
dateformat=0
timeformat=0
contrast=4
callhistory=1
context=from-internal
callerid=“Hyperfoto” <206405xxxx>
mailbox=1006
linelabel="x1006"
extension=line
line => 1006[/code]
you are not using asterisk but freepbx, when you connect to the cli and make a phonecall what output do you get?
[root@elastix ~]# asterisk -r
Asterisk 1.2.31.1, Copyright © 1999 - 2007 Digium, Inc. and others.
Created by Mark Spencer markster@digium.com
Asterisk comes with ABSOLUTELY NO WARRANTY; type ‘show warranty’ for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type ‘show license’ for details.
Connected to Asterisk 1.2.31.1 currently running on elastix (pid = 2325)
– Remote UNIX connection
Verbosity is at least 3
elastix*CLI>
Verbosity is at least 3
-- Starting switch on '1006@Brian-0' to 1001
-- Executing Macro("USTM/1006@Brian-0", "exten-vm|1001|1001") in new stack
-- Executing Macro("USTM/1006@Brian-0", "user-callerid") in new stack
-- Executing Set("USTM/1006@Brian-0", "AMPUSER=206405xxxx") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "0?report") in new stack
-- Executing ExecIf("USTM/1006@Brian-0", "1|Set|REALCALLERIDNUM=206405xxxx") in new stack
-- Executing Set("USTM/1006@Brian-0", "AMPUSER=") in new stack
-- Executing Set("USTM/1006@Brian-0", "AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?report") in new stack
-- Goto (macro-user-callerid,s,11)
-- Executing GotoIf("USTM/1006@Brian-0", "0?continue") in new stack
-- Executing Set("USTM/1006@Brian-0", "__TTL=64") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing NoOp("USTM/1006@Brian-0", "Using CallerID "Hyperfoto" <206405xxxx>") in new stack
-- Executing Set("USTM/1006@Brian-0", "FROMCONTEXT=exten-vm") in new stack
-- Executing Set("USTM/1006@Brian-0", "VMBOX=1001") in new stack
-- Executing Set("USTM/1006@Brian-0", "EXTTOCALL=1001") in new stack
-- Executing Set("USTM/1006@Brian-0", "CFUEXT=") in new stack
-- Executing Set("USTM/1006@Brian-0", "CFBEXT=") in new stack
-- Executing Set("USTM/1006@Brian-0", "RT=20") in new stack
-- Executing Macro("USTM/1006@Brian-0", "record-enable|1001|IN") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing AGI("USTM/1006@Brian-0", "recordingcheck|20090204-034836|1233737316.23") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20090204-034836|1233737316.23: Inbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing MacroExit("USTM/1006@Brian-0", "") in new stack
-- Executing Macro("USTM/1006@Brian-0", "dial|20|tr|1001") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?dial") in new stack
-- Goto (macro-dial,s,3)
-- Executing AGI("USTM/1006@Brian-0", "dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
dialparties.agi: Caller ID name is 'Hyperfoto' number is '206405xxxx'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 1001 to extension map
-- dialparties.agi: Extension 1001 cf is disabled
-- dialparties.agi: Extension 1001 do not disturb is disabled
dialparties.agi: Extension 1001 has ExtensionState: 0
-- dialparties.agi: Checking CW and CFB status for extension 1001
-- dialparties.agi: dbset CALLTRACE/1001 to 206405xxxx
-- dialparties.agi: Filtered ARG3: 1001
== Manager 'admin' logged off from 127.0.0.1
-- AGI Script dialparties.agi completed, returning 0
-- Executing NoOp("USTM/1006@Brian-0", "Returned from dialparties with no extensions to call and DIALSTATUS: ") in new stack
-- Executing Set("USTM/1006@Brian-0", "SV_DIALSTATUS=") in new stack
-- Executing GosubIf("USTM/1006@Brian-0", "0?docfu|1") in new stack
-- Executing GosubIf("USTM/1006@Brian-0", "0?docfb|1") in new stack
-- Executing Set("USTM/1006@Brian-0", "DIALSTATUS=") in new stack
-- Executing NoOp("USTM/1006@Brian-0", "Voicemail is 1001") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "0?s-|1") in new stack
-- Executing NoOp("USTM/1006@Brian-0", "Sending to Voicemail box 1001") in new stack
-- Executing Macro("USTM/1006@Brian-0", "vm|1001|") in new stack
-- Executing Macro("USTM/1006@Brian-0", "user-callerid|SKIPTTL") in new stack
-- Executing Set("USTM/1006@Brian-0", "AMPUSER=206405xxxx") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "0?report") in new stack
-- Executing ExecIf("USTM/1006@Brian-0", "0|Set|REALCALLERIDNUM=206405xxxx") in new stack
-- Executing Set("USTM/1006@Brian-0", "AMPUSER=") in new stack
-- Executing Set("USTM/1006@Brian-0", "AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?report") in new stack
-- Goto (macro-user-callerid,s,11)
-- Executing GotoIf("USTM/1006@Brian-0", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing NoOp("USTM/1006@Brian-0", "Using CallerID "Hyperfoto" <206405xxxx>") in new stack
-- Executing Set("USTM/1006@Brian-0", "VMGAIN=") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?vmx|1") in new stack
-- Goto (macro-vm,vmx,1)
-- Executing GotoIf("USTM/1006@Brian-0", "0?s-|1") in new stack
-- Executing Set("USTM/1006@Brian-0", "MODE=unavail") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?notdirect") in new stack
-- Goto (macro-vm,vmx,5)
-- Executing NoOp("USTM/1006@Brian-0", "Checking if ext 1001 is enabled: ") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "1?s-|1") in new stack
-- Goto (macro-vm,s-,1)
-- Executing Macro("USTM/1006@Brian-0", "get-vmcontext|1001") in new stack
-- Executing Set("USTM/1006@Brian-0", "VMCONTEXT=default") in new stack
-- Executing GotoIf("USTM/1006@Brian-0", "0?200:300") in new stack
-- Goto (macro-get-vmcontext,s,300)
-- Executing NoOp("USTM/1006@Brian-0", "") in new stack
-- Executing VoiceMail("USTM/1006@Brian-0", "1001@default|u") in new stack
-- Playing '/var/spool/asterisk/voicemail/default/1001/unavail' (language 'en')
== Spawn extension (macro-vm, s-, 2) exited non-zero on 'USTM/1006@Brian-0' in macro 'vm'
== Spawn extension (macro-vm, s-, 2) exited non-zero on 'USTM/1006@Brian-0' in macro 'exten-vm'
== Spawn extension (macro-vm, s-, 2) exited non-zero on 'USTM/1006@Brian-0'
Thats from calling from extension 1006 to 1001.
Dialing in from cell into phone server number then dialing extension 1001.
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Executing Set("SIP/206405xxxx-09436dd0", "__FROM_DID=206405xxxx") in new stack
-- Executing Gosub("SIP/206405xxxx-09436dd0", "app-blacklist-check|s|1") in new stack
-- Executing LookupBlacklist("SIP/206405xxxx-09436dd0", "") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?blacklisted") in new stack
-- Executing Return("SIP/206405xxxx-09436dd0", "") in new stack
-- Executing ExecIf("SIP/206405xxxx-09436dd0", "0 |Set|CALLERID(name)=703489xxxx") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "FAX_RX=disabled") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "__CALLINGPRES_SV=allowed_not_screened") in new stack
-- Executing SetCallerPres("SIP/206405xxxx-09436dd0", "allowed_not_screened") in new stack
-- Executing Goto("SIP/206405xxxx-09436dd0", "ivr-2|s|1") in new stack
-- Goto (ivr-2,s,1)
-- Executing Set("SIP/206405xxxx-09436dd0", "MSG=custom/HFMainIVR") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "LOOPCOUNT=0") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "__DIR-CONTEXT=default") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "_IVR_CONTEXT_ivr-2=") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "_IVR_CONTEXT=ivr-2") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?begin") in new stack
-- Executing Answer("SIP/206405xxxx-09436dd0", "") in new stack
-- Executing Wait("SIP/206405xxxx-09436dd0", "1") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "TIMEOUT(digit)=3") in new stack
-- Digit timeout set to 3
-- Executing Set("SIP/206405xxxx-09436dd0", "TIMEOUT(response)=10") in new stack
-- Response timeout set to 10
-- Executing Set("SIP/206405xxxx-09436dd0", "__IVR_RETVM=") in new stack
-- Executing ExecIf("SIP/206405xxxx-09436dd0", "1|Background|custom/HFMainIVR") in new stack
-- Playing 'custom/HFMainIVR' (language 'en')
== CDR updated on SIP/206405xxxx-09436dd0
-- Executing ExecIf("SIP/206405xxxx-09436dd0", "0|dbDel|") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "__NODEST=") in new stack
-- Executing Goto("SIP/206405xxxx-09436dd0", "from-did-direct|1001|1") in new stack
-- Goto (from-did-direct,1001,1)
-- Executing Macro("SIP/206405xxxx-09436dd0", "exten-vm|1001|1001") in new stack
-- Executing Macro("SIP/206405xxxx-09436dd0", "user-callerid") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "AMPUSER=703489xxxx") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?report") in new stack
-- Executing ExecIf("SIP/206405xxxx-09436dd0", "1|Set|REALCALLERIDNUM=703489xxxx") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "AMPUSER=") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?report") in new stack
-- Goto (macro-user-callerid,s,11)
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?continue") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "__TTL=64") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing NoOp("SIP/206405xxxx-09436dd0", "Using CallerID "Alexandria VA" <703489xxxx>") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "FROMCONTEXT=exten-vm") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "VMBOX=1001") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "EXTTOCALL=1001") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "CFUEXT=") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "CFBEXT=") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "RT=20") in new stack
-- Executing Macro("SIP/206405xxxx-09436dd0", "record-enable|1001|IN") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing AGI("SIP/206405xxxx-09436dd0", "recordingcheck|20090204-035048|1233737442.24") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20090204-035048|1233737442.24: Inbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing MacroExit("SIP/206405xxxx-09436dd0", "") in new stack
-- Executing Macro("SIP/206405xxxx-09436dd0", "dial|20|tr|1001") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?dial") in new stack
-- Goto (macro-dial,s,3)
-- Executing AGI("SIP/206405xxxx-09436dd0", "dialparties.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
dialparties.agi: Starting New Dialparties.agi
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
dialparties.agi: Caller ID name is 'Alexandria VA' number is '703489xxxx'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 1001 to extension map
-- dialparties.agi: Extension 1001 cf is disabled
-- dialparties.agi: Extension 1001 do not disturb is disabled
dialparties.agi: Extension 1001 has ExtensionState: 0
-- dialparties.agi: Checking CW and CFB status for extension 1001
-- dialparties.agi: dbset CALLTRACE/1001 to 703489xxxx
-- dialparties.agi: Filtered ARG3: 1001
== Manager 'admin' logged off from 127.0.0.1
-- AGI Script dialparties.agi completed, returning 0
-- Executing NoOp("SIP/206405xxxx-09436dd0", "Returned from dialparties with no extensions to call and DIALSTATUS: ") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "SV_DIALSTATUS=") in new stack
-- Executing GosubIf("SIP/206405xxxx-09436dd0", "0?docfu|1") in new stack
-- Executing GosubIf("SIP/206405xxxx-09436dd0", "0?docfb|1") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "DIALSTATUS=") in new stack
-- Executing NoOp("SIP/206405xxxx-09436dd0", "Voicemail is 1001") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?s-|1") in new stack
-- Executing NoOp("SIP/206405xxxx-09436dd0", "Sending to Voicemail box 1001") in new stack
-- Executing Macro("SIP/206405xxxx-09436dd0", "vm|1001|") in new stack
-- Executing Macro("SIP/206405xxxx-09436dd0", "user-callerid|SKIPTTL") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "AMPUSER=703489xxxx") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?report") in new stack
-- Executing ExecIf("SIP/206405xxxx-09436dd0", "0|Set|REALCALLERIDNUM=703489xxxx") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "AMPUSER=") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "AMPUSERCIDNAME=") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?report") in new stack
-- Goto (macro-user-callerid,s,11)
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?continue") in new stack
-- Goto (macro-user-callerid,s,20)
-- Executing NoOp("SIP/206405xxxx-09436dd0", "Using CallerID "Alexandria VA" <703489xxxx>") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "VMGAIN=") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?vmx|1") in new stack
-- Goto (macro-vm,vmx,1)
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?s-|1") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "MODE=unavail") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?notdirect") in new stack
-- Goto (macro-vm,vmx,5)
-- Executing NoOp("SIP/206405xxxx-09436dd0", "Checking if ext 1001 is enabled: ") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "1?s-|1") in new stack
-- Goto (macro-vm,s-,1)
-- Executing Macro("SIP/206405xxxx-09436dd0", "get-vmcontext|1001") in new stack
-- Executing Set("SIP/206405xxxx-09436dd0", "VMCONTEXT=default") in new stack
-- Executing GotoIf("SIP/206405xxxx-09436dd0", "0?200:300") in new stack
-- Goto (macro-get-vmcontext,s,300)
-- Executing NoOp("SIP/206405xxxx-09436dd0", "") in new stack
-- Executing VoiceMail("SIP/206405xxxx-09436dd0", "1001@default|u") in new stack
-- Playing '/var/spool/asterisk/voicemail/default/1001/unavail' (language 'en')
== Spawn extension (macro-vm, s-, 2) exited non-zero on 'SIP/206405xxxx-09436dd0' in macro 'vm'
== Spawn extension (macro-vm, s-, 2) exited non-zero on 'SIP/206405xxxx-09436dd0' in macro 'exten-vm'
== Spawn extension (macro-vm, s-, 2) exited non-zero on 'SIP/206405xxxx-09436dd0'
any idea?