I can place outbound calls but inbound calls go stright to a recording on my asterisk server. Below are my config files. I would like any help you are willing to give. let me know if i need to post more info.
Thanks
***extensions.conf
; Asterisk Management Portal (AMP)
; Copyright © 2004 Coalescent Systems Inc
; dialparties.agi (sprackett.com/asterisk/)
; Asterisk::AGI (asterisk.gnuinter.net/)
; gsm (ibiblio.org/pub/Linux/utils/ … short.html)
; loligo sounds (loligo.com/asterisk/sounds/)
; mpg123 (voip-info.org/wiki-Asterisk+conf … nhold.conf)
; include extension contexts generated from AMP
#include extensions_additional.conf
; Customizations to this dialplan should be made in extensions_custom.conf
; See extensions_custom.conf.sample for an example
#include extensions_custom.conf
[from-trunk] ; just an alias since VoIP shouldn’t be called PSTN
include => from-pstn
[from-pstn]
include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations
include => ext-findmefollow ; MODIFICATOIN (PL) for findmefollow if enabled, should be bofore ext-local
include => ext-did-direct ; MODIFICATOIN (PL) put before ext-did to take precedence
include => ext-did
exten => fax,1,Goto(ext-fax,in_fax,1)
; MODIFICATION (PL)
;
; Required to assure that direct dids go to personal ring group before local extension.
; This could be auto-generated however I it is prefered to be put here and hard coded
; so that it can be modified if ext-local should take precedence in certain situations.
; will have to decide what to do later.
;
[from-did-direct]
include => ext-findmefollow
include => ext-local
; ############################################################################
; Macros [macro]
; ############################################################################
; Rings one or more extensions. Handles things like call forwarding and DND
; We don’t call dial directly for anything internal anymore.
; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, …
; Use a Macro call such as the following:
; Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,…)
[macro-dial]
exten => s,1,AGI,dialparties.agi
exten => s,2,NoOp(Returned from dialparties with no extensions to call)
exten => s,3,NoOp(DIALSTATUS is ‘${DIALSTATUS}’)
exten => s,10,Dial(${ds}) ; dialparties will set the priority to 10 if $ds is not null
exten => s,20,NoOp(Returned from dialparties with hunt groups to dial )
exten => s,21,Set(HuntLoop=0)
exten => s,22,GotoIf($[${HuntMembers} >= 1]?30 ) ; if this is from rg-group, don’t strip prefix
exten => s,23,NoOp(Returning there are no members left in the hunt group to ring)
exten => s,30,Set(HuntMember=HuntMember${HuntLoop})
exten => s,31,GotoIf($[$["${CALLTRACE_HUNT}" != “” ] & $["${RingGroupMethod}" = “hunt” ]]?32:35 ) ; Set CAll Trace for Hunt member we are going to call
exten => s,32,Set(CT_EXTEN=${CUT(ARG3,$[${HuntLoop} + 1])})
exten => s,33,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,34,Goto(s,42)
exten => s,35,GotoIf($[$["${CALLTRACE_HUNT}" != “” ] & $["${RingGroupMethod}" = “memoryhunt” ]]?36:50 ) ;Set Call Trace for each hunt member we are going to call "Memory groups have multiple members to set CALL TRACE For hence the loop
exten => s,36,Set(CTLoop=0)
exten => s,37,GotoIf($[${CTLoop} > ${HuntLoop}]?42 ) ; if this is from rg-group, don’t strip prefix
exten => s,38,Set(CT_EXTEN=${CUT(ARG3,$[${CTLoop} + 1])})
exten => s,39,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,40,Set(CTLoop=$[1 + ${CTLoop}])
exten => s,41,Goto(s,37)
exten => s,42,Dial(${${HuntMember}}${ds} ) ; dialparties will set the priority to 20 if $ds is not null and its a hunt group
exten => s,43,Set(HuntLoop=$[1 + ${HuntLoop}])
exten => s,44,Set(HuntMembers=$[${HuntMembers} - 1])
exten => s,45,Goto(s,22)
exten => s,50,DBdel(CALLTRACE/${CT_EXTEN})
exten => s,51,Goto(s,42)
; Ring an extension, if the extension is busy or there is no answer send it
; to voicemail
; ARGS: $VMBOX, $EXT
[macro-exten-vm]
exten => s,1,Macro(user-callerid)
exten => s,n,Set(FROMCONTEXT=exten-vm)
exten => s,n,Set(VMBOX=${ARG1})
exten => s,n,Set(EXTTOCALL=${ARG2})
exten => s,n,Set(CFUEXT=${DB(CFU/${EXTTOCALL})})
exten => s,n,Set(RT=${IF($[$["${VMBOX}"!=“novm”] | $[“foo${CFUEXT}”!=“foo”]]?${RINGTIMER}:"")})
exten => s,n,Macro(record-enable,${EXTTOCALL},IN)
exten => s,n,GotoIf($["${CHANNEL:0:5}" = “Local”]?dolocaldial,1) ; if the channel is Local
exten => s,n,Macro(dial,${RT},${DIAL_OPTIONS},${EXTTOCALL})
exten => s,n,GosubIf($[$["${DIALSTATUS}"=“NOANSWER”] & $[“foo${CFUEXT}”!=“foo”]]?docfu,1) ; check for CFU in use on no answer
exten => s,n,NoOp(Voicemail is ‘${VMBOX}’)
exten => s,n,GotoIf($["${VMBOX}" = “novm”]?s-${DIALSTATUS},1) ; no voicemail in use for this extension
exten => s,n,NoOp(Sending to Voicemail box ${EXTTOCALL})
exten => s,n,Macro(vm,${VMBOX},${DIALSTATUS})
; Local channel should try to ring the phone only then come back out
; i.e. it’s wrong for it to Answer the call in any way (including Congestion
; and stop the initiating dialplan from being returned to)
exten => dolocaldial,1,Macro(dial,${DIAL_OPTIONS},${EXTTOCALL})
exten => dolocaldial,n,NoOp(Returned to dolocaldial with DIALSTATUS ‘${DIALSTATUS}’)
; Try the Call Forward on No Answer / Unavailable number
exten => docfu,1,Set(RTCFU=${IF($["${VMBOX}"!=“novm”]?${RINGTIMER}:"")})
exten => docfu,n,Dial(Local/${CFUEXT}@from-internal/n,${RTCFU},${DIAL_OPTIONS})
exten => docfu,n,Return
; Extensions with no Voicemail box reporting BUSY come here
exten => s-BUSY,1,NoOp(Extension is reporting BUSY and not passing to Voicemail)
exten => s-BUSY,n,Busy()
exten => s-BUSY,n,Wait(60)
exten => s-BUSY,n,Congestion()
; Anything but BUSY comes here
exten => _s-.,1,Congestion()
[macro-vm]
exten => s,1,Macro(user-callerid)
exten => s,n,Set(VMGAIN=${IF($[“foo${VM_GAIN}”!=“foo”]?“g(${VM_GAIN})”:"")})
exten => s,n,Goto(s-${ARG2},1)
exten => s-BUSY,1,NoOp(BUSY voicemail)
exten => s-BUSY,n,Macro(get-vmcontext,${ARG1})
exten => s-BUSY,n,Voicemail(${ARG1}@${VMCONTEXT}|b${VMGAIN}) ; Voicemail Busy message
exten => s-BUSY,n,Goto(exit-${VMSTATUS},1)
exten => s-DIRECTDIAL,1,NoOp(DIRECTDIAL voicemail)
exten => s-DIRECTDIAL,n,Macro(get-vmcontext,${ARG1})
exten => s-DIRECTDIAL,n,Voicemail(${ARG1}@${VMCONTEXT}|${VM_DDTYPE}${VMGAIN})
exten => s-DIRECTDIAL,n,Goto(exit-${VMSTATUS},1)
exten => _s-.,1,Macro(get-vmcontext,${ARG1})
exten => _s-.,n,Voicemail(${ARG1}@${VMCONTEXT}|u${VMGAIN}) ; Voicemail Unavailable message
exten => _s-.,n,Goto(exit-${VMSTATUS},1)
exten => o,1,Background(one-moment-please) ; 0 during vm message will hangup
exten => o,n,GotoIf($[“foo${FROM_DID}” = “foo”]?from-pstn,s,1:from-pstn,${FROM_DID},1)
exten => a,1,Macro(get-vmcontext,${ARG1})
exten => a,n,VoiceMailMain(${ARG1}@${VMCONTEXT})
exten => a,n,Hangup
exten => exit-FAILED,1,Playback(im-sorry&an-error-has-occured)
exten => exit-FAILED,n,Hangup()
exten => exit-SUCCESS,1,Playback(goodbye)
exten => exit-SUCCESS,n,Hangup()
exten => exit-USEREXIT,1,Playback(goodbye)
exten => exit-USEREXIT,n,Hangup()
exten => t,1,Hangup()
; get the voicemail context for the user in ARG1
[macro-get-vmcontext]
exten => s,1,Set(VMCONTEXT=${DB(AMPUSER/${ARG1}/voicemail)})
exten => s,2,GotoIf($[“foo${VMCONTEXT}” = “foo”]?200:300)
exten => s,200,Set(VMCONTEXT=default)
exten => s,300,NoOp()
; For some reason, if I don’t run setCIDname, CALLERID(name) will be blank in my AGI
; ARGS: none
[macro-fixcid]
exten => s,1,Set(CALLERID(name)=${CALLERID(name)})
; Ring groups of phones
; ARGS: comma separated extension list
; 1 - Ring Group Strategy
; 2 - ringtimer
; 3 - prefix
; 4 - extension list
[macro-rg-group]
exten => s,1,Macro(user-callerid)
exten => s,2,GotoIf($["${CALLERID(name):0:${LEN(${RGPREFIX})}}" != “${RGPREFIX}”]?4:3) ; check for old prefix
exten => s,3,Set(CALLERID(name)=${CALLERID(name):${LEN(${RGPREFIX})}}) ; strip off old prefix
exten => s,4,Set(RGPREFIX=${ARG3}) ; set new prefix
exten => s,5,Set(CALLERID(name)=${RGPREFIX}${CALLERID(name)}) ; add prefix to callerid name
exten => s,6,Set(RecordMethod=Group) ; set new prefix
exten => s,7,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
exten => s,8,Set(RingGroupMethod=${ARG1}) ;
exten => s,9,Macro(dial,${ARG2},${DIAL_OPTIONS},${ARG4})
exten => s,10,Set(RingGroupMethod=’’) ;
;
; Outgoing channel(s) are busy … inform the client
;
[macro-outisbusy]
exten => s,1,Playback(all-circuits-busy-now)
exten => s,2,Playback(pls-try-call-later)
exten => s,3,Macro(hangupcall)
; What to do on hangup.
[macro-hangupcall]
exten => s,1,ResetCDR(w)
exten => s,2,NoCDR()
exten => s,3,Wait(5)
exten => s,4,Hangup
[macro-faxreceive]
exten => s,1,Set(FAXFILE=/var/spool/asterisk/fax/${UNIQUEID}.tif)
exten => s,2,Set(EMAILADDR=${FAX_RX_EMAIL})
exten => s,3,rxfax(${FAXFILE})
exten => s,103,Set(EMAILADDR=${FAX_RX_EMAIL})
exten => s,104,Goto(3)
; dialout and strip the prefix
[macro-dialout]
exten => s,1,Macro(user-callerid)
exten => s,2,GotoIf($["${ECID${CALLERID(number)}}" = “”]?5) ;check for CID override for exten
exten => s,3,Set(CALLERID(all)=${ECID${CALLERID(number)}})
exten => s,4,Goto(7)
exten => s,5,GotoIf($["${OUTCID_${ARG1}}" = “”]?7) ;check for CID override for trunk
exten => s,6,Set(CALLERID(all)=${OUTCID_${ARG1}})
exten => s,7,Set(length=${LEN(${DIAL_OUT_${ARG1}})})
exten => s,8,Dial(${OUT_${ARG1}}/${ARG2:${length}})
exten => s,9,Congestion
exten => s,109,Macro(outisbusy)
; dialout using default OUT trunk - no prefix
[macro-dialout-default]
exten => s,1,Macro(user-callerid)
exten => s,2,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,3,Macro(outbound-callerid,${ARG1})
exten => s,4,Dial(${OUT}/${ARG1})
exten => s,5,Congestion
exten => s,105,Macro(outisbusy)
; dialout using a trunk, using pattern matching (don’t strip any prefix)
; arg1 = trunk number, arg2 = number, arg3 = route password
;
; MODIFIED (PL)
;
; Modified both Dial() commands to include the new TRUNK_OPTIONS from the general
; screen of AMP
;
[macro-dialout-trunk]
exten => s,1,GotoIf($["${ARG3}" = “”]?3:2) ; arg3 is pattern password
exten => s,2,Authenticate(${ARG3})
exten => s,3,Macro(user-callerid)
exten => s,4,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,5,Macro(outbound-callerid,${ARG1})
exten => s,6,Set(GROUP()=OUT_${ARG1})
exten => s,7,GotoIf($[ ${GROUP_COUNT()} > ${OUTMAXCHANS_${ARG1}} ]?108)
; if we’ve used up the max channels, continue at (n+101)
exten => s,8,Set(DIAL_NUMBER=${ARG2})
exten => s,9,Set(DIAL_TRUNK=${ARG1})
exten => s,10,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk
exten => s,11,Set(OUTNUM=${OUTPREFIX_${ARG1}}${DIAL_NUMBER}) ; OUTNUM is the final dial number
exten => s,12,Set(custom=${CUT(OUT_${ARG1},:,1)}) ; Custom trunks are prefixed with “AMP:“
exten => s,13,GotoIf($[”${custom}” = “AMP”]?16)
exten => s,14,Dial(${OUT_${ARG1}}/${OUTNUM},120,${TRUNK_OPTIONS}) ; Regular Trunk Dial
exten => s,15,Goto(s-${DIALSTATUS},1)
; This is a custom trunk. Substitute $OUTNUM$ with the actual number and rebuild the dialstring
; example trunks: “AMP:CAPI/XXXXXXXX:b$OUTNUM$,30,r”, “AMP:OH323/$OUTNUM$@XX.XX.XX.XX:XXXX"
exten => s,16,Set(pre_num=${CUT(OUT_${ARG1},$,1)})
exten => s,17,Set(the_num=${CUT(OUT_${ARG1},$,2)}) ; this is where we expect to find string OUTNUM
exten => s,18,Set(post_num=${CUT(OUT_${ARG1},$,3)})
exten => s,19,GotoIf($[”${the_num}" = “OUTNUM”]?20:21) ; if we didn’t find “OUTNUM”, then skip to Dial
exten => s,20,Set(the_num=${OUTNUM}) ; replace “OUTNUM” with the actual number to dial
exten => s,21,Dial(${pre_num:4}${the_num}${post_num},120,${TRUNK_OPTIONS})
exten => s,22,Goto(s-${DIALSTATUS},1)
exten => s,108,Noop(max channels used up)
exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
exten => s-BUSY,2,Busy()
exten => s-BUSY,3,Wait(60)
exten => s-BUSY,4,NoOp()
exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})
; Adds a dynamic agent/member to a Queue
; Prompts for call-back number - in not entered, uses CIDNum
[macro-agent-add]
exten => s,1,Wait(1)
exten => s,2,Macro(user-callerid)
exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user
exten => s,4,GotoIf($["${CALLBACKNUM}" = “”]?5:7)) ; if user just pressed # or timed out, use cidnum
exten => s,5,Set(CALLBACKNUM=${CALLERID(number)})
exten => s,6,GotoIf($["${CALLBACKNUM}" = “”]?2)) ; if still no number, start over
exten => s,7,GotoIf($["${ARG2}" = “”]?9:8)) ; arg2 is queue password
exten => s,8,Authenticate(${ARG2})
exten => s,9,AddQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal/n) ; using chan_local allows us to have agents over trunks
exten => s,10,UserEvent(Agentlogin|Agent: ${CALLBACKNUM})
exten => s,11,Wait(1)
exten => s,12,Playback(agent-loginok)
exten => s,13,Hangup()
; Removes a dynamic agent/member from a Queue
; Prompts for call-back number - in not entered, uses CIDNum
[macro-agent-del]
exten => s,1,Wait(1)
exten => s,2,Macro(user-callerid)
exten => s,3,Read(CALLBACKNUM,agent-user) ; get callback number from user
exten => s,4,GotoIf($["${CALLBACKNUM}" = “”]?5:7)) ; if user just pressed # or timed out, use cidnum
exten => s,5,Set(CALLBACKNUM=${CALLERID(number)})
exten => s,6,GotoIf($["${CALLBACKNUM}" = “”]?2)) ; if still no number, start over
exten => s,7,RemoveQueueMember(${ARG1}|Local/${CALLBACKNUM}@from-internal/n)
exten => s,8,UserEvent(RefreshQueue)
exten => s,9,Wait(1)
exten => s,10,Playback(agent-loggedoff)
exten => s,11,Hangup()
; arg1 = trunk number, arg2 = number
[macro-dialout-enum]
; This has been violently beaten upon by Rob Thomas, xrobau@gmail.com
; to 1: Be compliant with all the depreciated bits in asterisk 1.2 and
; above, and 2: to give a good shot at attempting to be compliant with
; RFC3761 by honouring the order in which records are returned.
exten => s,1,GotoIf($["${ARG3}" = “”]PASSWD?NOPASSWD); arg3 is pattern password
exten => s,n(PASSWD),Authenticate(${ARG3})
exten => s,n(NOPASSWD),Macro(user-callerid)
exten => s,n,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,n,Macro(outbound-callerid,${ARG1})
exten => s,n,Set(GROUP()=OUT_${ARG1})
exten => s,n,GotoIf($[ ${GROUP_COUNT()} > ${OUTMAXCHANS_${ARG1}} ]?nochans)
exten => s,n,Set(DIAL_NUMBER=${ARG2})
exten => s,n,Set(DIAL_TRUNK=${ARG1})
exten => s,n,AGI(fixlocalprefix) ; this sets DIAL_NUMBER to the proper dial string for this trunk
exten => s,n,Set(E164NETWORKS=e164.arpa-e164.info-e164.org) ; enum networks to check
exten => s,n,GotoIf($["${DIAL_NUMBER:0:1}" = “+”]?begin) ; Skip next line if it already is prefixed by a plus
exten => s,n,Set(DIAL_NUMBER=+${DIAL_NUMBER}) ; Add a plus to the start, becasue ENUMLOOKUP needs it.
; start of main network loop
exten => s,n(begin),NoOp(E164NETWORKS is ${E164NETWORKS})
exten => s,n,GotoIf($["${E164NETWORKS:1:2}"=""]?failedtotally)
exten => s,n,Set(ENUMNET=${CUT(E164NETWORKS,-,1)})
exten => s,n,Set(E164NETWORKS=${CUT(E164NETWORKS,-,2-)})
exten => s,n,NoOp(E164NETWORKS is now ${E164NETWORKS})
exten => s,n,NoOp(ENUMNET is ${ENUMNET})
exten => s,n,Set(ENUMCOUNT=${ENUMLOOKUP(${DIAL_NUMBER},all,c,${ENUMNET})})
exten => s,n,Set(ENUMPTR=0)
exten => s,n,Set(LOOKUPBUG=0)
; start of main lookup loop
exten => s,n(startloop),GotoIf($["${ENUMPTR}"<"${ENUMCOUNT}"]?continue:failed)
; Now, let’s start through them.
exten => s,n(continue),Set(ENUMPTR=$[${ENUMPTR}+1])
exten => s,n,NoOp(Doing ENUMLOOKUP(${DIAL_NUMBER},all,${ENUMPTR},${ENUMNET}))
exten => s,n,Set(ENUM=${ENUMLOOKUP(${DIAL_NUMBER},all,${ENUMPTR},${ENUMNET})})
; Deal with reponse
exten => s,n,GotoIf($["${ENUM:0:3}" = “sip” ]?sipuri)
exten => s,n,GotoIf($["${ENUM:0:3}" = “iax” ]?iaxuri)
; It doesn’t matter if you don’t have h323 enabled, as when it tries to dial, it cares
; about dialstatus and retries if there are any enum results left.
exten => s,n,GotoIf($["${ENUM:0:3}" = “h32” ]?h323uri)
; e164.org can return ‘ADDRESS’ lines. Because of *'s poor handling of Enum
; lookups, we want to DECREMENT the enum pointer. Yes. That means we try more
; times than there actually exists entries.
exten => s,n,GotoIf($["${ENUM:0:3}" = “ADD” ]?enumbug)
; OK. If we’re here, we’ve still got some enum entries to go through. Back to
; the start with you!
exten => s,n,Goto(startloop)
; We’re here because of the poor implementation of ENUMLOOKUP in Asterisk. It
; is quite possible to do three ENUMLOOKUPS and get the same entry each time.
; The only workaround I can think of is when we hit an invalid entry, do a
; DECREMENT of the pointer, and keep trying.
exten => s,n(enumbug),Set(ENUMPTR=$[${ENUMPTR}-1])
exten => s,n,NoOp(If this is looping with the same ENUM value, The ENUMLOOKUP function is fixed!)
exten => s,n,Set(LOOKUPBUG=$[${LOOKUPBUG}+1])
; If we’ve done this more than, ooh, 5 times, then give up on this network. Sorry.
exten => s,n,GotoIf($["${LOOKUPBUG}" > 5 ]?failed)
exten => s,n,Goto(continue)
; If the prefix is ‘sip:’…
exten => s,n(sipuri),Set(DIALSTR=SIP/${ENUM:4})
exten => s,n,Goto(dodial)
; If it’s IAX2…
exten => s,n(iaxuri),Set(DIALSTR=IAX2/${ENUM:5})
exten => s,n,Goto(dodial)
; Or even if it’s H323.
exten => s,n(h323uri),Set(DIALSTR=H323/${ENUM:5})
exten => s,n(dodial),Dial(${DIALSTR})
exten => s,n,NoOp(Dial exited in macro-enum-dialout with ${DIALSTATUS})
; Now, if we’re still here, that means the Dial failed for some reason.
; If it’s CONGESTION or CHANUNAVAIL we probably want to try again on a
; different channel. However, if it’s the last one, we don’t have any
; left, and I didn’t keep any previous dialstatuses, so hopefully
; someone looking throught the logs would have seen the NoOp’s
exten => s,n,GotoIf($["${ENUMPTR}"<"${ENUMCOUNT}"]?maybemore:dialfailed)
exten => s,n(maybemore),GotoIf($[ $[ “${DIALSTATUS}” = “CHANUNAVAIL” ] | $[ “${DIALSTATUS}” = “CONGESTION” ] ]?continue)
; If we’re here, then it’s BUSY or NOANSWER or something and well, deal with it.
exten => s,n(dialfailed),Goto(s-${DIALSTATUS},1)
; Here are the exit points for the macro.
exten => s,n(failed),NoOp(EnumLookup failed on network ${ENUMNET})
exten => s,n,Goto(begin)
exten => s,n(failedtotally),NoOp(EnumLookup failed – no more networks to try)
exten => s,n,Goto(end)
exten => s,n(nochans),NoOp(max channels used up)
exten => s,n(end),NoOp(Exiting macro-dialout-enum)
exten => s-BUSY,1,NoOp(Trunk is reporting BUSY)
exten => s-BUSY,2,Busy()
exten => s-BUSY,3,Wait(60)
exten => s-BUSY,4,NoOp()
exten => _s-.,1,NoOp(Dial failed due to ${DIALSTATUS})
[macro-record-enable]
exten => s,1,GotoIf(${LEN(${BLINDTRANSFER})} > 0?2:4)
exten => s,2,ResetCDR(w)
exten => s,3,StopMonitor()
exten => s,4,AGI(recordingcheck,${TIMESTAMP},${UNIQUEID})
exten => s,5,Noop(No recording needed)
exten => s,999,Monitor(wav49,${CALLFILENAME}, mb)
;exten => s,3,BackGround(for-quality-purposes)
;exten => s,4,BackGround(this-call-may-be)
;exten => s,5,BackGround(recorded)
; This macro is for dev purposes and just dumps channel/app variables. Useful when designing new contexts.
[macro-dumpvars]
exten => s,1,Noop(ACCOUNTCODE=${ACCOUNTCODE})
exten => s,2,Noop(ANSWEREDTIME=${ANSWEREDTIME})
exten => s,3,Noop(BLINDTRANSFER=${BLINDTRANSFER})
exten => s,4,Noop(CALLERID=${CALLERID(all)})
exten => s,5,Noop(CALLERID(name)=${CALLERID(name)})
exten => s,6,Noop(CALLERID(number)=${CALLERID(number)})
exten => s,7,Noop(CALLINGPRES=${CALLINGPRES})
exten => s,8,Noop(CHANNEL=${CHANNEL})
exten => s,9,Noop(CONTEXT=${CONTEXT})
exten => s,10,Noop(DATETIME=${DATETIME})
exten => s,11,Noop(DIALEDPEERNAME=${DIALEDPEERNAME})
exten => s,12,Noop(DIALEDPEERNUMBER=${DIALEDPEERNUMBER})
exten => s,13,Noop(DIALEDTIME=${DIALEDTIME})
exten => s,14,Noop(DIALSTATUS=${DIALSTATUS})
exten => s,15,Noop(DNID=${DNID})
exten => s,16,Noop(EPOCH=${EPOCH})
exten => s,17,Noop(EXTEN=${EXTEN})
exten => s,18,Noop(HANGUPCAUSE=${HANGUPCAUSE})
exten => s,19,Noop(INVALID_EXTEN=${INVALID_EXTEN})
exten => s,20,Noop(LANGUAGE=${LANGUAGE})
exten => s,21,Noop(MEETMESECS=${MEETMESECS})
exten => s,22,Noop(PRIORITY=${PRIORITY})
exten => s,23,Noop(RDNIS=${RDNIS})
exten => s,24,Noop(SIPDOMAIN=${SIPDOMAIN})
exten => s,25,Noop(SIP_CODEC=${SIP_CODEC})
exten => s,26,Noop(SIPCALLID=${SIPCALLID})
exten => s,27,Noop(SIPUSERAGENT=${SIPUSERAGENT})
exten => s,28,Noop(TIMESTAMP=${TIMESTAMP})
exten => s,29,Noop(TXTCIDNAME=${TXTCIDNAME})
exten => s,30,Noop(UNIQUEID=${UNIQUEID})
exten => s,31,Noop(TOUCH_MONITOR=${TOUCH_MONITOR})
exten => s,32,Noop(MACRO_CONTEXT=${MACRO_CONTEXT})
exten => s,33,Noop(MACRO_EXTEN=${MACRO_EXTEN})
exten => s,34,Noop(MACRO_PRIORITY=${MACRO_PRIORITY})
[macro-user-logon]
; check device type
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,2,GotoIf($["${DEVICETYPE}" = “fixed”]?s-FIXED,1)
; get user’s extension
exten => s,3,Set(AMPUSER=${ARG1})
exten => s,4,GotoIf($["${AMPUSER}" = “”]?5:9)
exten => s,5,BackGround(please-enter-your)
exten => s,6,Playback(extension)
exten => s,7,Read(AMPUSER,then-press-pound)
; get user’s password and authenticate
exten => s,8,Wait(1)
exten => s,9,Set(AMPUSERPASS=${DB(AMPUSER/${AMPUSER}/password)})
exten => s,10,GotoIf($[${LEN(${AMPUSERPASS})} = 0]?s-NOPASSWORD,1)
; do not continue if the user has already logged onto this device
exten => s,11,Set(DEVICEUSER=${DB(DEVICE/${CALLERID(number)}/user)})
exten => s,12,GotoIf($["${DEVICEUSER}" = “${AMPUSER}”]?s-ALREADYLOGGEDON,1)
exten => s,13,Authenticate(${AMPUSERPASS})
; devices can only be mapped to one user - loggoff anyone else who is here
exten => s,14,Macro(user-logoff)
; map user to device
exten => s,15,Set(AMPUSERDEVICES=${DB(AMPUSER/${AMPUSER}/device)})
exten => s,16,GotoIf($[${LEN(${AMPUSERDEVICES})} = 0]?18)
exten => s,17,Set(AMPUSERDEVICES=${AMPUSERDEVICES}&)
exten => s,18,Set(AMPUSERDEVICES=${AMPUSERDEVICES}${CALLERID(number)})
exten => s,19,Set(DB(AMPUSER/${AMPUSER}/device)=${AMPUSERDEVICES})
; map device to user
exten => s,20,Set(DB(DEVICE/${CALLERID(number)}/user)=${AMPUSER})
; create symlink from dummy device mailbox to user’s mailbox
exten => s,21,System(/bin/ln -s /var/spool/asterisk/voicemail/default/${AMPUSER}/ /var/spool/asterisk/voicemail/device/${CALLERID(number)})
exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged into)
exten => s-FIXED,2,Playback(ha/phone)
exten => s-FIXED,3,SayDigits(${CALLERID(number)})
exten => s-FIXED,4,Playback(is-curntly-unavail)
exten => s-FIXED,5,Playback(vm-goodbye)
exten => s-FIXED,6,Hangup ;TODO should play msg indicated device cannot be logged into
exten => s-ALREADYLOGGEDON,1,NoOp(This device has already been logged into by this user)
exten => s-ALREADYLOGGEDON,2,Playback(vm-goodbye)
exten => s-ALREADYLOGGEDON,3,Hangup ;TODO should play msg indicated device is already logged into
exten => s-NOPASSWORD,1,NoOp(This extension does not exist or no password is set)
exten => s-NOPASSWORD,2,Playback(an-error-has-occured)
exten => s-NOPASSWORD,3,Playback(vm-goodbye)
exten => s-NOPASSWORD,4,Hangup ;TODO should play msg indicated device is already logged into
[macro-user-logoff]
; check device type
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,2,GotoIf($["${DEVICETYPE}" = “fixed”]?s-FIXED,1)
; remove entry from user’s DEVICE key
; delete the symlink to user’s voicemail box
exten => s,3,System(rm -f /var/spool/asterisk/voicemail/device/${CALLERID(number)})
exten => s,4,Set(DEVAMPUSER=${DB(DEVICE/${CALLERID(number)}/user)})
exten => s,5,Set(AMPUSERDEVICES=${DB(AMPUSER/${DEVAMPUSER}/device)})
exten => s,6,AGI(list-item-remove.php,${AMPUSERDEVICES},${CALLERID(number)},AMPUSERDEVICES,&)
; reset user -> device mapping
; users can log onto multiple devices, need to just remove device from value
exten => s,7,Set(DB(AMPUSER/${DEVAMPUSER}/device)=${AMPUSERDEVICES})
; reset device -> user mapping
exten => s,8,Set(DB(DEVICE/${CALLERID(number)}/user)=none)
exten => s,9,Playback(vm-goodbye)
exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged out of)
exten => s-FIXED,2,Playback(an-error-has-occured)
exten => s-FIXED,3,Playback(vm-goodbye)
exten => s-FIXED,4,Hangup ;TODO should play msg indicated device cannot be logged into
[macro-systemrecording]
exten => s,1,Goto(${ARG1},1)
exten => dorecord,1,Record(/tmp/${CALLERID(number)}-ivrrecording:wav)
exten => dorecord,n,Wait(1)
exten => dorecord,n,Goto(confmenu,1)
exten => docheck,1,Playback(/tmp/${CALLERID(number)}-ivrrecording)
exten => docheck,n,Wait(1)
exten => docheck,n,Goto(confmenu,1)
exten => confmenu,1,Background(to-listen-to-it&press-1&to-rerecord-it&press-star|m||macro-systemrecording)
exten => confmenu,n,Read(RECRESULT||1|||4)
exten => confmenu,n,GotoIf($[“x${RECRESULT}”=“x*”]?dorecord,1)
exten => confmenu,n,GotoIf($[“x${RECRESULT}”=“x1”]?docheck,1)
exten => confmenu,n,Goto(1)
exten => 1,1,Goto(docheck,1)
exten => *,1,Goto(dorecord,1)
exten => t,1,Playback(goodbye)
exten => t,n,Hangup
exten => i,1,Playback(pm-invalid-option)
exten => i,n,Goto(confmenu,1)
exten => h,1,Hangup
;
; ############################################################################
; CallerID Handling
; ############################################################################
;sets the callerid of the device to that of the logged in user
[macro-user-callerid]
exten => s,1,GotoIf($["${CHANNEL:0:5}" = “Local”]?report)
exten => s,n,GotoIf($["${REALCALLERIDNUM:1:2}" != “”]?start)
exten => s,n,Set(REALCALLERIDNUM=${CALLERID(number)})
exten => s,n(start),NoOp(REALCALLERIDNUM is ${REALCALLERIDNUM})
exten => s,n,Set(AMPUSER=${DB(DEVICE/${REALCALLERIDNUM}/user)})
exten => s,n,Set(AMPUSERCIDNAME=${DB(AMPUSER/${AMPUSER}/cidname)})
exten => s,n,GotoIf($[“x${AMPUSERCIDNAME:1:2}” = “x”]?report)
exten => s,n,Set(CALLERID(all)=${AMPUSERCIDNAME} <${AMPUSER}>)
exten => s,n(report),NoOp(Using CallerID ${CALLERID(all)})
; overrides callerid out trunks
; arg1 is trunk
; macro-user-callerid should be called before using this macro
[macro-outbound-callerid]
exten => s,1,GotoIf($["${REALCALLERIDNUM:1:2}" != “”]?start)
exten => s,n,Set(REALCALLERIDNUM=${CALLERID(number)})
exten => s,n(start),NoOp(REALCALLERIDNUM is ${REALCALLERIDNUM})
exten => s,n,Set(USEROUTCID=${DB(AMPUSER/${REALCALLERIDNUM}/outboundcid)})
exten => s,n,Set(EMERGENCYCID=${DB(DEVICE/${REALCALLERIDNUM}/emergency_cid)})
exten => s,n,Set(TRUNKOUTCID=${OUTCID_${ARG1}})
exten => s,n,GotoIf($["${EMERGENCYROUTE:1:2}" = “”]?trunkcid) ; check EMERGENCY ROUTE
exten => s,n,GotoIf($["${EMERGENCYCID:1:2}" = “”]?trunkcid) ; empty EMERGENCY CID, so default back to trunk
exten => s,n,Set(CALLERID(all)=${EMERGENCYCID}) ; emergency cid for device
exten => s,n,Goto(report)
exten => s,n(trunkcid),GotoIf($["${TRUNKOUTCID:1:2}" = “”]?usercid) ;check for CID override for trunk (global var)
exten => s,n,Set(CALLERID(all)=${TRUNKOUTCID})
exten => s,n(usercid),GotoIf($["${USEROUTCID:1:2}" = “”]?report) ; check CID override for extension
exten => s,n,Set(CALLERID(all)=${USEROUTCID})
exten => s,n(report),NoOp(CallerID set to ${CALLERID(all)})
; Privacy Manager Macro makes sure that any calls that don’t pass the privacy manager are presented
; with congestion since there have been observed cases of the call continuing if not stopped with a
; congestion, and this provides a slightly more friendly ‘sorry’ message in case the user is
; legitamately trying to be cooperative.
;
; Note: the following options are configurable in privacy.conf:
;
; maxretries = 3 ; default value, number of retries before failing
; minlength = 10 ; default value, number of digits to be accepted as valid CID
;
[macro-privacy-mgr]
exten => s,1,Set(KEEPCID=${CALLERID(num)})
exten => s,n,GotoIf($[“foo${CALLERID(num):0:1}”=“foo+”]?CIDTEST2:CIDTEST1)
exten => s,n(CIDTEST1),Set(TESTCID=${MATH(1+${CALLERID(num)})})
exten => s,n,Goto(TESTRESULT)
exten => s,n(CIDTEST2),Set(TESTCID=${MATH(1+${CALLERID(num):1})})
exten => s,n(TESTRESULT),GotoIf($[“foo${TESTCID}”=“foo”]?CLEARCID:PRIVMGR)
exten => s,n(CLEARCID),Set(CALLERID(num)=)
exten => s,n(PRIVMGR),PrivacyManager()
exten => s,n,SetCallerPres(allowed_passed_screen); stop gap until app_privacy.c clears unavailble bit
exten => s,PRIVMGR+101,Noop(STATUS: ${PRIVACYMGRSTATUS} CID: ${CALLERID(num)} ${CALLERID(name)} CALLPRES: ${CALLLINGPRES})
exten => s,n,Playback(sorry-youre-having-problems)
exten => s,n,Playback(goodbye)
exten => s,n,Congestion()
exten => s,n,Hangup
;
; ############################################################################
; Inbound Contexts [from]
; ############################################################################
[from-sip-external]
;give external sip users congestion and hangup
; Yes. This is really meant to be _. - I know asterisk whinges about it, but
; I do know what I’m doing. This is correct.
exten => _.,1,NoOp(Received incoming SIP connection from unknown peer to ${EXTEN})
exten => _.,n,Set(DID=${IF($["${EXTEN:1:2}"=""]?s:${EXTEN})})
exten => _.,n,Goto(s,1)
exten => s,1,GotoIf($["${ALLOW_SIP_ANON}"=“yes”]?from-trunk,${DID},1)
exten => s,n,Set(TIMEOUT(absolute)=15)
exten => s,n,Answer
exten => s,n,Wait(2)
exten => s,n,Playback(ss-noservice)
exten => s,n,Congestion
exten => s,n,Hangup
exten => h,1,NoOp(Hangup)
exten => i,1,NoOp(Invalid)
exten => t,1,NoOp(Timeout)
[from-internal]
; applications are now mostly all found in from-internal-additional in _custom.conf
include => parkedcalls
include => from-internal-custom
;allow phones to dial other extensions
include => ext-fax
;allow phones to access generated contexts
;
; MODIFIED (PL)
;
; Currently the include for findmefollow is being auto-generated before ext-local which is the desired behavior.
; However, I haven’t been able to do anything that I know of to force this. We need to determine if it should
; be hardcoded into here to make sure it doesn’t change with some configuration. For now I will leave it out
; until we can discuss this.
;
include => from-internal-additional
exten => s,1,Macro(hangupcall)
exten => h,1,Macro(hangupcall)
[from-zaptel]
exten => _X.,1,Set(DID=${EXTEN})
exten => _X.,n,Goto(s,1)
exten => s,1,NoOp(Entering from-zaptel with DID == ${DID})
; If ($did == “”) { $did = “s”; }
exten => s,n,Set(DID=${IF($["${DID}"= “”]?s:${DID})})
exten => s,n,NoOp(DID is now ${DID})
exten => s,n,GotoIf($["${CHANNEL:0:3}"=“Zap”]?zapok:notzap)
exten => s,n(notzap),Goto(ext-did,${DID},1)
; If there’s no ext-did,s,1, that means there’s not a no did/no cid route. Hangup.
exten => s,n,Macro(hangup)
exten => s,n(zapok),NoOp(Is a Zaptel Channel)
exten => s,n,Set(CHAN=${CHANNEL:4})
exten => s,n,Set(CHAN=${CUT(CHAN,-,1)})
exten => s,n,Macro(from-zaptel-${CHAN},${DID},1)
; If nothing there, then treat it as a DID
exten => s,n,NoOp(Returned from Macro from-zaptel-${CHAN})
exten => s,n,Goto(ext-did,${DID},1)
; ############################################################################
; Extension Contexts [ext]
; ############################################################################
[ext-fax]
exten => s,1,Answer
exten => s,2,Goto(in_fax,1)
exten => in_fax,1,StopPlayTones
exten => in_fax,2,GotoIf($["${FAX_RX}" = “system”]?3:analog_fax,1)
exten => in_fax,3,Macro(faxreceive)
exten => in_fax,4,system(/var/lib/asterisk/bin/fax-process.pl --to ${EMAILADDR} --from ${FAX_RX_FROM} --subject “Fax from ${CALLERID(number)} ${CALLERID(name)}” --attachment ${CALLERID(number)}.pdf --type application/pdf --file ${FAXFILE});
exten => in_fax,5,Hangup
exten => analog_fax,1,GotoIf($["${FAX_RX}" = “disabled”]?4:2) ;if fax is disabled, just hang up
exten => analog_fax,2,Set(DIAL=${DB(DEVICE/${FAX_RX}/dial)});
exten => analog_fax,3,Dial(${DIAL},20,d)
exten => analog_fax,4,Hangup
;exten => out_fax,1,wait(7)
exten => out_fax,1,txfax(${TXFAX_NAME}|caller)
exten => out_fax,2,Hangup
exten => h,1,Hangup()
;this is where parked calls go if they time-out. Should probably re-ring
[default]
include => ext-local
exten => s,1,Playback(vm-goodbye)
exten => s,2,Macro(hangupcall)
***extensions_additional.conf
[globals]
#include globals_custom.conf
CALLFILENAME = ""
DIAL_OPTIONS = tr
TRUNK_OPTIONS = r
DIAL_OUT = 9
FAX =
FAX_RX = system
FAX_RX_EMAIL = fax@mydomain.com
INCOMING = group-all
NULL = ""
OPERATOR =
PARKNOTIFY = SIP/200
RECORDEXTEN = ""
RINGTIMER = 10
DIRECTORY = last
AFTER_INCOMING =
IN_OVERRIDE = forcereghours
REGTIME = 7:55-17:05
REGDAYS = mon-fri
DIRECTORY_OPTS =
OUTPREFIX_1 =
OUTMAXCHANS_5 =
VM_PREFIX = *
TONEZONE = us-old
ALLOW_SIP_ANON = yes
FAX_RX_FROM = freepbx@gmail.com
VM_DDTYPE = u
VM_GAIN =
OUTPREFIX_5 =
OUT_5 = SIP/3333333333
OUTCID_2 = NoticeXpress <1111111111>
OUTMAXCHANS_2 =
DIALOUTIDS = 1/2/3/5/
OUT_1 = SIP/4444444444
OUTCID_3 = NoticeXpress <2222222222>
OUTMAXCHANS_3 = 1
OUTPREFIX_2 =
OUT_2 = SIP/IP1Network
OUTCID_1 =
OUTMAXCHANS_1 =
OUTPREFIX_3 =
OUT_3 = SIP/2222222222
OUTCID_5 =
;end of [globals]
[app-recordings]
include => app-recordings-custom
exten => *77,1,Macro(user-callerid,)
exten => *77,n,Wait(2)
exten => *77,n,Macro(systemrecording,dorecord)
exten => *99,1,Macro(user-callerid,)
exten => *99,n,Wait(2)
exten => *99,n,Macro(systemrecording,docheck)
; end of [app-recordings]
[ext-group]
include => ext-group-custom
exten => 1,1,Macro(user-callerid,)
exten => 1,n,GotoIf($["${CALLERID(name):0:${LEN(${RGPREFIX})}}" != “${RGPREFIX}”]?NEWPREFIX)
exten => 1,n,Set(CALLERID(name)=${CALLERID(name):${LEN(${RGPREFIX})}})
exten => 1,n(NEWPREFIX),Set(RGPREFIX=)
exten => 1,n,Set(CALLERID(name)=${RGPREFIX}${CALLERID(name)})
exten => 1,n,Set(RecordMethod=Group)
exten => 1,n,Macro(record-enable,200-203-204-205,${RecordMethod})
exten => 1,n,Set(RingGroupMethod=ringall)
exten => 1,n(DIALGRP),Macro(dial,20,${DIAL_OPTIONS},200-203-204-205)
exten => 1,n,Set(RingGroupMethod=)
exten => 1,n,Goto(ext-local,200,1)
; end of [ext-group]
[ivr-2]
include => ivr-2-custom
include => ext-findmefollow
include => ext-local
include => app-directory
exten => h,1,Hangup
exten => s,1,Set(LOOPCOUNT=0)
exten => s,n,Set(__DIR-CONTEXT=)
exten => s,n,Answer
exten => s,n,Wait(1)
exten => s,n(begin),Set(TIMEOUT(digit)=3)
exten => s,n,Set(TIMEOUT(response)=10)
exten => s,n,Background(custom/WelcNotic)
exten => hang,1,Playback(vm-goodbye)
exten => hang,n,Hangup
exten => 1,1,Goto(ext-local,200,1)
exten => 2,1,Goto(ext-local,203,1)
exten => i,1,Playback(invalid)
exten => i,n,Goto(loop,1)
exten => t,1,Goto(loop,1)
exten => loop,1,Set(LOOPCOUNT=$[${LOOPCOUNT} + 1])
exten => loop,n,GotoIf($[${LOOPCOUNT} > 2]?hang,1)
exten => loop,n,Goto(ivr-2,s,begin)
exten => fax,1,Goto(ext-fax,in_fax,1)
; end of [ivr-2]
[ext-findmefollow]
include => ext-findmefollow-custom
exten => 200,1,Macro(user-callerid,)
exten => 200,n,GotoIf($["${CALLERID(name):0:${LEN(${RGPREFIX})}}" != “${RGPREFIX}]”?NEWPREFIX)
exten => 200,n,Set(CALLERID(name)=${CALLERID(name):${LEN(${RGPREFIX})}})
exten => 200,n(NEWPREFIX),Set(RGPREFIX=)
exten => 200,n,Set(CALLERID(name)=${RGPREFIX}${CALLERID(name)})
exten => 200,n,Set(RecordMethod=Group)
exten => 200,n,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
exten => 200,n,Set(RingGroupMethod=ringall)
exten => 200,n(DIALGRP),Macro(dial,20,${DIAL_OPTIONS},203-204-205-200)
exten => 200,n,Set(RingGroupMethod=)
exten => 200,n,Goto(ext-local,205,1)
; end of [ext-findmefollow]
[app-calltrace]
include => app-calltrace-custom
exten => *69,1,Goto(app-calltrace-perform,s,1)
; end of [app-calltrace]
[app-calltrace-perform]
include => app-calltrace-perform-custom
exten => s,1,Macro(user-callerid,)
exten => s,n,Answer
exten => s,n,Wait(1)
exten => s,n,Playback(info-about-last-call&telephone-number)
exten => s,n,Set(lastcaller=${DB(CALLTRACE/${CALLERID(number)})})
exten => s,n,GotoIf($[ “${lastcaller}” = “” ]?noinfo)
exten => s,n,SayDigits(${lastcaller})
exten => s,n,Set(TIMEOUT(digit)=3)
exten => s,n,Set(TIMEOUT(response)=7)
exten => s,n,Background(to-call-this-number&press-1)
exten => s,n,Goto(fin)
exten => s,n(noinfo),Playback(from-unknown-caller)
exten => s,n,Macro(hangupcall,)
exten => s,n(fin),Noop(Waiting for input)
exten => 1,1,Goto(from-internal,${lastcaller},1)
exten => i,1,Playback(vm-goodbye)
exten => i,n,Macro(hangupcall,)
exten => t,1,Playback(vm-goodbye)
exten => t,n,Macro(hangupcall,)
; end of [app-calltrace-perform]
[app-directory]
include => app-directory-custom
exten => #,1,Answer
exten => #,n,Wait(1)
exten => #,n,AGI(directory,${DIR-CONTEXT},from-did-direct,${DIRECTORY:0:1}${DIRECTORY_OPTS}o)
exten => #,n,Playback(vm-goodbye)
exten => #,n,Hangup
; end of [app-directory]
[app-echo-test]
include => app-echo-test-custom
exten => *43,1,Answer
exten => *43,n,Wait(1)
exten => *43,n,Playback(demo-echotest)
exten => *43,n,Echo()
exten => *43,n,Playback(demo-echodone)
exten => *43,n,Hangup
; end of [app-echo-test]
[app-speakextennum]
include => app-speakextennum-custom
exten => *65,1,Answer
exten => *65,n,Wait(1)
exten => *65,n,Playback(your)
exten => *65,n,Playback(extension)
exten => *65,n,Playback(number)
exten => *65,n,Playback(is)
exten => *65,n,SayDigits(${CALLERIDNUM})
exten => *65,n,Wait(2)
exten => *65,n,Hangup
; end of [app-speakextennum]
[app-speakingclock]
include => app-speakingclock-custom
exten => *60,1,Answer
exten => *60,n,Wait(1)
exten => *60,n,Playback(at-tone-time-exactly)
exten => *60,n,SayUnixTime(,IMp)
exten => *60,n,Playback(beep)
exten => *60,n,Hangup
; end of [app-speakingclock]
[app-dnd-off]
include => app-dnd-off-custom
exten => *79,1,Answer
exten => *79,n,Wait(1)
exten => *79,n,Macro(user-callerid,)
exten => *79,n,dbDel(DND/${CALLERID(number)})
exten => *79,n,Playback(do-not-disturb&de-activated)
exten => *79,n,Macro(hangupcall,)
; end of [app-dnd-off]
[app-dnd-on]
include => app-dnd-on-custom
exten => *78,1,Answer
exten => *78,n,Wait(1)
exten => *78,n,Macro(user-callerid,)
exten => *78,n,Set(DB(DND/${CALLERID(number)})=YES)
exten => *78,n,Playback(do-not-disturb&activated)
exten => *78,n,Macro(hangupcall,)
; end of [app-dnd-on]
[app-callwaiting-cwoff]
include => app-callwaiting-cwoff-custom
exten => *71,1,Answer
exten => *71,n,Wait(1)
exten => *71,n,Macro(user-callerid,)
exten => *71,n,dbDel(CW/${CALLERID(number)})
exten => *71,n,Playback(call-waiting&de-activated)
exten => *71,n,Macro(hangupcall,)
; end of [app-callwaiting-cwoff]
[app-callwaiting-cwon]
include => app-callwaiting-cwon-custom
exten => *70,1,Answer
exten => *70,n,Wait(1)
exten => *70,n,Macro(user-callerid,)
exten => *70,n,Set(DB(CW/${CALLERID(number)})=ENABLED)
exten => *70,n,Playback(call-waiting&activated)
exten => *70,n,Macro(hangupcall,)
; end of [app-callwaiting-cwon]
[app-dialvm]
include => app-dialvm-custom
exten => *98,1,Answer
exten => *98,n,Wait(1)
exten => *98,n,VoiceMailMain()
exten => *98,n,Macro(hangupcall,)
exten => _*98.,1,Answer
exten => _*98.,n,Wait(1)
exten => _*98.,n,Macro(get-vmcontext,${EXTEN:3})
exten => _*98.,n,VoiceMailMain(${EXTEN:3}@${VMCONTEXT})
exten => _*98.,n,Macro(hangupcall,)
; end of [app-dialvm]
[app-vmmain]
include => app-vmmain-custom
exten => *97,1,Answer
exten => *97,n,Wait(1)
exten => *97,n,Macro(user-callerid,)
exten => *97,n,Macro(get-vmcontext,${CALLERID(num)})
exten => *97,n,VoiceMailMain(${CALLERID(num)}@${VMCONTEXT})
exten => *97,n,Macro(hangupcall,)
; end of [app-vmmain]
[app-cf-busy-off]
include => app-cf-busy-off-custom
exten => *91,1,Answer
exten => *91,n,Wait(1)
exten => *91,n,Macro(user-callerid,)
exten => *91,n,dbDel(CFB/${CALLERID(number)})
exten => *91,n,Playback(call-fwd-on-busy&de-activated)
exten => *91,n,Macro(hangupcall,)
exten => _*91.,1,Answer
exten => _*91.,n,Wait(1)
exten => _*91.,n,Set(fromext=${EXTEN:3})
exten => _*91.,n,dbDel(CFB/${fromext})
exten => _*91.,n,Playback(call-fwd-on-busy&for&extension)
exten => _*91.,n,SayDigits(${fromext})
exten => _*91.,n,Playback(cancelled)
exten => _*91.,n,Macro(hangupcall,)
; end of [app-cf-busy-off]
[app-cf-busy-off-any]
include => app-cf-busy-off-any-custom
exten => *92,1,Answer
exten => *92,n,Wait(1)
exten => *92,n,Playback(please-enter-your&extension)
exten => *92,n,Read(fromext,then-press-pound,)
exten => *92,n,Wait(1)
exten => *92,n,dbDel(CFB/${fromext})
exten => *92,n,Playback(call-fwd-on-busy&for&extension)
exten => *92,n,SayDigits(${fromext})
exten => *92,n,Playback(cancelled)
exten => *92,n,Macro(hangupcall,)
; end of [app-cf-busy-off-any]
[app-cf-busy-on]
include => app-cf-busy-on-custom
exten => *90,1,Answer
exten => *90,n,Wait(1)
exten => *90,n,Playback(call-fwd-on-busy)
exten => *90,n,Playback(please-enter-your&extension)
exten => *90,n,Read(fromext,then-press-pound,)
exten => *90,n,Set(fromext=${IF($[“foo${fromext}”=“foo”]?${CALLERID(number)}:${fromext})})
exten => *90,n,Wait(1)
exten => *90,n(startread),Playback(ent-target-attendant)
exten => *90,n,Read(toext,then-press-pound,)
exten => *90,n,GotoIf($[“foo${toext}”=“foo”]?startread)
exten => *90,n,Wait(1)
exten => *90,n,Set(DB(CFB/${fromext})=${toext})
exten => *90,n,Playback(call-fwd-on-busy&for&extension)
exten => *90,n,SayDigits(${fromext})
exten => *90,n,Playback(is-set-to)
exten => *90,n,SayDigits(${toext})
exten => *90,n,Macro(hangupcall,)
exten => _*90.,1,Answer
exten => _*90.,n,Wait(1)
exten => _*90.,n,Macro(user-callerid,)
exten => _*90.,n,Set(DB(CFB/${CALLERID(number)})=${EXTEN:3})
exten => _*90.,n,Playback(call-fwd-on-busy&for&extension)
exten => _*90.,n,SayDigits(${CALLERID(number)})
exten => _*90.,n,Playback(is-set-to)
exten => _*90.,n,SayDigits(${EXTEN:3})
exten => _*90.,n,Macro(hangupcall,)
; end of [app-cf-busy-on]
[app-cf-off]
include => app-cf-off-custom
exten => *73,1,Answer
exten => *73,n,Wait(1)
exten => *73,n,Macro(user-callerid,)
exten => *73,n,dbDel(CF/${CALLERID(number)})
exten => *73,n,Playback(call-fwd-unconditional&de-activated)
exten => *73,n,Macro(hangupcall,)
exten => _*73.,1,Answer
exten => _*73.,n,Wait(1)
exten => _*73.,n,Set(fromext=${EXTEN:3})
exten => _*73.,n,dbDel(CF/${fromext})
exten => _*73.,n,Playback(call-fwd-unconditional&for&extension)
exten => _*73.,n,SayDigits(${fromext})
exten => _*73.,n,Playback(cancelled)
exten => _*73.,n,Macro(hangupcall,)
; end of [app-cf-off]
[app-cf-off-any]
include => app-cf-off-any-custom
exten => *74,1,Answer
exten => *74,n,Wait(1)
exten => *74,n,Playback(please-enter-your&extension)
exten => *74,n,Read(fromext,then-press-pound,)
exten => *74,n,Wait(1)
exten => *74,n,dbDel(CF/${fromext})
exten => *74,n,Playback(call-fwd-unconditional&for&extension)
exten => *74,n,SayDigits(${fromext})
exten => *74,n,Playback(cancelled)
exten => *74,n,Macro(hangupcall,)
; end of [app-cf-off-any]
[app-cf-on]
include => app-cf-on-custom
exten => *72,1,Answer
exten => *72,n,Wait(1)
exten => *72,n,Playback(call-fwd-unconditional)
exten => *72,n,Playback(please-enter-your&extension)
exten => *72,n,Read(fromext,then-press-pound,)
exten => *72,n,Set(fromext=${IF($[“foo${fromext}”=“foo”]?${CALLERID(number)}:${fromext})})
exten => *72,n,Wait(1)
exten => *72,n(startread),Playback(ent-target-attendant)
exten => *72,n,Read(toext,then-press-pound,)
exten => *72,n,GotoIf($[“foo${toext}”=“foo”]?startread)
exten => *72,n,Wait(1)
exten => *72,n,Set(DB(CF/${fromext})=${toext})
exten => *72,n,Playback(call-fwd-unconditional&for&extension)
exten => *72,n,SayDigits(${fromext})
exten => *72,n,Playback(is-set-to)
exten => *72,n,SayDigits(${toext})
exten => *72,n,Macro(hangupcall,)
exten => _*72.,1,Answer
exten => _*72.,n,Wait(1)
exten => _*72.,n,Macro(user-callerid,)
exten => _*72.,n,Set(DB(CF/${CALLERID(number)})=${EXTEN:3})
exten => _*72.,n,Playback(call-fwd-unconditional&for&extension)
exten => _*72.,n,SayDigits(${CALLERID(number)})
exten => _*72.,n,Playback(is-set-to)
exten => _*72.,n,SayDigits(${EXTEN:3})
exten => _*72.,n,Macro(hangupcall,)
; end of [app-cf-on]
[app-cf-unavailable-off]
include => app-cf-unavailable-off-custom
exten => *53,1,Answer
exten => *53,n,Wait(1)
exten => *53,n,Macro(user-callerid,)
exten => *53,n,dbDel(CFU/${CALLERID(number)})
exten => *53,n,Playback(call-fwd-no-ans&de-activated)
exten => *53,n,Macro(hangupcall,)
exten => _*53.,1,Answer
exten => _*53.,n,Wait(1)
exten => _*53.,n,Set(fromext=${EXTEN:3})
exten => _*53.,n,dbDel(CFU/${fromext})
exten => _*53.,n,Playback(call-fwd-no-ans&for&extension)
exten => _*53.,n,SayDigits(${fromext})
exten => _*53.,n,Playback(cancelled)
exten => _*53.,n,Macro(hangupcall,)
; end of [app-cf-unavailable-off]
[app-cf-unavailable-on]
include => app-cf-unavailable-on-custom
exten => *52,1,Answer
exten => *52,n,Wait(1)
exten => *52,n,Playback(call-fwd-no-ans)
exten => *52,n,Playback(please-enter-your&extension)
exten => *52,n,Read(fromext,then-press-pound,)
exten => *52,n,Set(fromext=${IF($[“foo${fromext}”=“foo”]?${CALLERID(number)}:${fromext})})
exten => *52,n,Wait(1)
exten => *52,n(startread),Playback(ent-target-attendant)
exten => *52,n,Read(toext,then-press-pound,)
exten => *52,n,GotoIf($[“foo${toext}”=“foo”]?startread)
exten => *52,n,Wait(1)
exten => *52,n,Set(DB(CFU/${fromext})=${toext})
exten => *52,n,Playback(call-fwd-no-ans&for&extension)
exten => *52,n,SayDigits(${fromext})
exten => *52,n,Playback(is-set-to)
exten => *52,n,SayDigits(${toext})
exten => *52,n,Macro(hangupcall,)
exten => _*52.,1,Answer
exten => _*52.,n,Wait(1)
exten => _*52.,n,Macro(user-callerid,)
exten => _*52.,n,Set(DB(CFU/${CALLERID(number)})=${EXTEN:3})
exten => _*52.,n,Playback(call-fwd-no-ans&for&extension)
exten => _*52.,n,SayDigits(${CALLERID(number)})
exten => _*52.,n,Playback(is-set-to)
exten => _*52.,n,SayDigits(${EXTEN:3})
exten => _*52.,n,Macro(hangupcall,)
; end of [app-cf-unavailable-on]
[app-userlogonoff]
include => app-userlogonoff-custom
exten => *12,1,Macro(user-logoff,)
exten => *12,n,Hangup
exten => *11,1,Macro(user-logon,)
exten => *11,n,Hangup
exten => _*11.,1,Macro(user-logon,${EXTEN:3},)
exten => _*11.,n,Hangup
; end of [app-userlogonoff]
[app-zapbarge]
include => app-zapbarge-custom
exten => 888,1,Macro(user-callerid,)
exten => 888,n,Set(GROUP()=${CALLERID(number)})
exten => 888,n,Answer
exten => 888,n,Wait(1)
exten => 888,n,ZapBarge()
exten => 888,n,Hangup
; end of [app-zapbarge]
[ext-test]
include => ext-test-custom
exten => 7777,1,Goto(from-pstn,s,1)
exten => 666,1,Goto(ext-fax,in_fax,1)
exten => h,1,Macro(hangupcall,)
; end of [ext-test]
[ext-did]
include => ext-did-custom
exten => s,1,Set(FROM_DID=s)
exten => s,n,Set(FAX_RX=disabled)
exten => s,n,Goto(ext-group,1,1)
exten => _X.,1,Noop(Catch-All DID Match - Found ${EXTEN} - You probably want a DID for this.)
exten => _X.,n,Goto(ext-did,s,1)
; end of [ext-did]
[ext-did-direct]
include => ext-did-direct-custom
exten => 1111111111,1,Set(FROM_DID=1111111111)
exten => 1111111111,n,Goto(from-did-direct,200,1)
; end of [ext-did-direct]
[ext-local]
include => ext-local-custom
;exten => 200,1,Macro(exten-vm,novm,200)
;exten => 200,hint,SIP/200
;exten => 203,1,Macro(exten-vm,novm,203)
;exten => 203,hint,SIP/203
;exten => 204,1,Macro(exten-vm,novm,204)
;exten => 204,hint,SIP/204
;exten => 205,1,Macro(exten-vm,novm,205)
;exten => 205,hint,SIP/205
exten => 1111111111,1,Dial( SIP/200 )
exten => 1111111111,2,Hangup
exten => 2222222222,1,Dial( SIP/205 )
exten => 2222222222,2,Hangup
exten => 3333333333,1,Dial( SIP/200 )
exten => 3333333333,2,Hangup
exten => 4444444444,1,Dial( SIP/200 )
exten => 4444444444,2,Hangup
exten => 200,1,Dial(SIP/200)
exten => 200,2,hangup
; end of [ext-local]
[outbound-allroutes]
include => outbound-allroutes-custom
include => outrt-001-9_outside
exten => foo,1,Noop(bar)
; end of [outbound-allroutes]
[outrt-001-9_outside]
include => outrt-001-9_outside-custom
exten => _1800NXXXXXX,1,Macro(dialout-trunk,2,${EXTEN},)
exten => _1800NXXXXXX,n,Macro(outisbusy,)
exten => _1866NXXXXXX,1,Macro(dialout-trunk,2,${EXTEN},)
exten => _1866NXXXXXX,n,Macro(outisbusy,)
exten => _1877NXXXXXX,1,Macro(dialout-trunk,2,${EXTEN},)
exten => _1877NXXXXXX,n,Macro(outisbusy,)
exten => _1888NXXXXXX,1,Macro(dialout-trunk,2,${EXTEN},)
exten => _1888NXXXXXX,n,Macro(outisbusy,)
exten => _1NXXNXXXXXX,1,Macro(dialout-trunk,2,${EXTEN},)
exten => _1NXXNXXXXXX,n,Macro(outisbusy,)
exten => _9.,1,Macro(dialout-trunk,2,${EXTEN:1},)
exten => _9.,n,Macro(outisbusy,)
exten => _NXXNXXXXXX,1,Macro(dialout-trunk,2,${EXTEN},)
exten => _NXXNXXXXXX,n,Macro(outisbusy,)
exten => _NXXXXXX,1,Macro(dialout-trunk,2,${EXTEN},)
exten => _NXXXXXX,n,Macro(outisbusy,)
; end of [outrt-001-9_outside]
[from-internal-additional]
include => from-internal-additional-custom
include => app-recordings
include => ext-group
include => ext-findmefollow
include => ext-queues
include => app-calltrace
include => app-directory
include => app-echo-test
include => app-speakextennum
include => app-speakingclock
include => app-dnd-off
include => app-dnd-on
include => app-callwaiting-cwoff
include => app-callwaiting-cwon
include => ext-meetme
include => app-dialvm
include => app-vmmain
include => app-cf-busy-off
include => app-cf-busy-off-any
include => app-cf-busy-on
include => app-cf-off
include => app-cf-off-any
include => app-cf-on
include => app-cf-unavailable-off
include => app-cf-unavailable-on
include => app-userlogonoff
include => app-zapbarge
include => ext-test
include => ext-local
include => outbound-allroutes
exten => h,1,Hangup
; end of [from-internal-additional]
***extensions_custom.conf
; This file contains example extensions_custom.conf entries.
; extensions_custom.conf should be used to include customizations
; to AMP’s Asterisk dialplan.
; All custom context should contain the string ‘custom’ in it’s name
; Extensions in AMP have access to the ‘from-internal’ context.
; The context ‘from-internal-custom’ is included in ‘from-internal’ by default
#include extensions_trixbox.conf
#include extensions_hud.conf
[from-internal-custom]
include => from-internal-trixbox
;1234,1,Playback(demo-congrats) ; extensions can dial 1234
;1234,2,Hangup()
;h,1,Hangup()
;include => custom-recordme ; extensions can also dial 5678
; custom-count2four,s,1 can be used as a custom target for
; a Digital Receptionist menu or a Call Group
;[custom-count2four]
;s,1,SayDigits(1234)
;s,2,Hangup
; custom-recordme,5678,1 can be used as a custom target for
; a Digital Receptionist menu or a Call Group
;[custom-recordme]
;exten => 5678,1,Wait(2)
;exten => 5678,2,Record(/tmp/asterisk-recording:gsm)
;exten => 5678,3,Wait(2)
;exten => 5678,4,Playback(/tmp/asterisk-recording)
;exten => 5678,5,Wait(2)
;exten => 5678,6,Hangup
******sip.conf
; Note: If your SIP devices are behind a NAT and your Asterisk
; server isn’t, try adding “nat=1” to each peer definition to
; solve translation problems.
[general]
bindport = 5060 ; Port to bind to (SIP is 5060)
bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
disallow=all
allow=ulaw
allow=alaw
; If you need to answer unauthenticated calls, you should change this
; next line to ‘from-trunk’, rather than ‘from-sip-external’.
; You’ll know this is happening if when you call in you get a message
; saying "The number you have dialed is not in service. Please check the
; number and try again."
context = from-trunk
; Send unknown SIP callers to this context
callerid =
tos=0x68
; #, in this configuration file, is NOT A COMMENT. This is exactly
; how it should be.
#include sip_nat.conf
#include sip_custom.conf
#include sip_additional.conf
*****sip_additional.conf
register=4444444444:password4@sip.myvoipservers.com
register=2222222222:password2@sip.myvoipserver.com
register=1111111111:password1@sip.myvoipserver.com
register=3333333333:password3@sip.myvoipservers.com
[200]
username=200
type=friend
secret=200
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5070
nat=yes
mailbox=200@device
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid=EXT 200 <200>
[203]
username=203
type=friend
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=1
mailbox=203@device
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid=EXT 203 DeskTop <203>
[204]
username=204
type=friend
secret=204
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=never
mailbox=204@device
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid=Lucent <204>
[205]
username=205
type=friend
secret=205
record_out=Adhoc
record_in=Adhoc
qualify=no
port=5060
nat=never
mailbox=205@device
host=dynamic
dtmfmode=rfc2833
context=from-internal
canreinvite=no
callerid=Lucent <205>
[2222222222]
username=2222222222
type=peer
secret=password2
host=sip.myvoipserver.com
context=from-trunk
[3333333333]
username=3333333333
type=peer
secret=password3
host=sip.myvoipserver.com
context=from-trunk
[4444444444]
username=4444444444
type=peer
secret=password4
host=sip.myvoipserver.com
context=from-trunk
[1111111111]
type=user
dtmfmode=rfc2833
disallow=all
context=inbound-did
allow=g729;ulaw
[IP1Network]
username=1111111111
type=peer
secret=password1
host=sip.myvoipserver.com
context=from-trunk