TE110P: ZT_CHANCONFIG failed on channel 32

Hello everybody.

Please give me any help with this: I have a TE110P and a TDM422P installed together.

I get this error when i try to load the TE110P module (modprobe wcte11xp):

ZT_CHANCONFIG failed on channel 32: No such device or address (6)
FATAL: Error running install command for wcte11x

If i ignore this error and try to load the TDM422P module (modprobe wcte11xp), no errors are displayed, the TDM422P green lights are illuminated and the TDM422P red light starts to blink.

After this, the TDM422P works fine.

I have 1 trunk and 1 extension connected to TDM422P and no pris connected to the TE110P.

Any advice will be appreciated. Mi config files are:

----------------- zaptel.conf ---------------------------------
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
fxoks=32-33
fxsks=34-35
loadzone = us
defaultzone = us

--------------------- cat zapata.conf ------------------------
[trunkgroups]

[channels]
busydetect=no
callprogress=no
switchtype=euroisdn
pridialplan=unknown
localpridialplan=national
immediate=no
overlapdial=yes
echocancel=no
echocancelwhenbridged=no
echotrainig=no
signalling=pri_cpe
channel => 1-15,17-31

signalling=fxo_ks
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
group=1
context=default
channel => 32-33

signalling=fxs_ks
group=2
context=incoming
channel=> 34-35

Thanks in advance
[/i]

Never mind, this message can be disregard. This is because wctdm has not been loaded yet.