Hallo,
i installed two cards on my debian machine: a te110p (for a PRI channel with only 16 lines) and a tdm400p (for one analog phone).
My TE110P work well only in alone mode (without other digium board).
For zaptel.conf i use:
===== for TE110P =====
span=1,1,0,ccs,hdb3,crc4,yellow
bchan=1-15
dchan=16
loadzone = it
defaultzone=it
I tried to use both with:
====================
span=1,1,0,esf,b8zs
e&m=1-16
span=2,1,0,esf,b8zs
fxoks=17
and with this configuration:
span=1,1,0,esf,b8zs
e&m=1-16
fxoks=17
But these configurations don’t work: i received an error when i try to load modules
For first configuration
ZT_SPANCONFIG failed on span 2: No such device or address (6)
And for the second one
ERR: Channel 1 already configured as ‘E & M’ at line 61
Thank you for your help
Gabriele