I’m having a little trouble setting up the phones to dial out or receive calls from outside. I have worked everything out up to this point. I have looked all over and it looks as though there should be something in my zapata.conf that points the calls in the right direction. So now I am asking you all if you could take a look at my files to see if they’re missing something. Here is my zapata.conf:
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
I have a wctdm wildcard with 8 ports but I only have 1 phone line. I’m not sure if I need to make any special changes for this or not. If you need to see any other config files please let me know. Thank you all.