Hi, any one tried using A101 and TE110P card on one box? What would be the right zaptel and zapata config? Were using E1 for the interconnect. Please help
cheers!
Do I set Sangoma as span2?
span = 1,1,0,ccs,hdb3 <— TE110P?
span = 2,2,0,ccs,hdb3,crc4 <—A101?
bchan = 1-15,17-46,48-72
dchan = 16,47
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,1,3,ccs,hdb3,crc4
bchan=32-…
dchan=…
and so on.
Loadzone depends on your country.
Then you need to check which driver is loaded first. This is important since it determines what card is No.1 and No.2
Evtl. adjust your spans (swap them) to match the cardload order.
Super thanks!