Pbx.c:6860 ast_pbx_start: PBX requires Asterisk to be fully booted

Asterisk Asterisk Support
1

unable to make ob call from any pri and unable to make receive any ib calls??

2

pbx.c:6860 ast_pbx_start: PBX requires Asterisk to be fully booted
sig_pri.c:6085 sig_pri_handle_setup: Unable to start PBX on channel 0/1, span 1

3

That will occur if a call is attempted before Asterisk is fully started as the message says. Normally this is quick, but if a module at startup is experiencing a problem then it can hold up the start process so Asterisk never becomes fully booted. You would need to examine the Asterisk log to see what is happening.

1 Like
4

slin g729 slin16 slin12 slin24 slin32 slin44 slin48 slin96 slin192
slin - 6000 8000 8000 8000 8000 8000 8000 8000 8000
g729 9000 - 17000 17000 17000 17000 17000 17000 17000 17000
slin16 8500 14500 - 8500 8000 8000 8000 8000 8000 8000
slin12 8500 14500 8000 - 8000 8000 8000 8000 8000 8000
slin24 8500 14500 8500 8500 - 8000 8000 8000 8000 8000
slin32 8500 14500 8500 8500 8500 - 8000 8000 8000 8000
slin44 8500 14500 8500 8500 8500 8500 - 8000 8000 8000
slin48 8500 14500 8500 8500 8500 8500 8500 - 8000 8000
slin96 8500 14500 8500 8500 8500 8500 8500 8500 - 8000
slin192 8500 14500 8500 8500 8500 8500 8500 8500 8500 -
localhost*CLI>

i am getting only these codec on this server however on my other inbound server below are the output
gsm ulaw alaw g726 adpcm slin lpc10 g729 ilbc g726aal2 g722 slin16 testlaw slin12 slin24 slin32 slin44 slin48 slin96 slin192
gsm - 15000 15000 15000 15000 9000 15000 15000 15000 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
ulaw 15000 - 9150 15000 15000 9000 15000 15000 15000 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
alaw 15000 9150 - 15000 15000 9000 15000 15000 15000 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
g726 15000 15000 15000 - 15000 9000 15000 15000 15000 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
adpcm 15000 15000 15000 15000 - 9000 15000 15000 15000 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
slin 6000 6000 6000 6000 6000 - 6000 6000 6000 6000 8250 8000 6000 8000 8000 8000 8000 8000 8000 8000
lpc10 15000 15000 15000 15000 15000 9000 - 15000 15000 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
g729 15000 15000 15000 15000 15000 9000 15000 - 15000 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
ilbc 15000 15000 15000 15000 15000 9000 15000 15000 - 15000 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
g726aal2 15000 15000 15000 15000 15000 9000 15000 15000 15000 - 17250 17000 15000 17000 17000 17000 17000 17000 17000 17000
g722 15600 15600 15600 15600 15600 9600 15600 15600 15600 15600 - 9000 15600 17500 17000 17000 17000 17000 17000 17000
slin16 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 6000 - 14500 8500 8000 8000 8000 8000 8000 8000
testlaw 15000 15000 15000 15000 15000 9000 15000 15000 15000 15000 17250 17000 - 17000 17000 17000 17000 17000 17000 17000
slin12 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 14000 8000 14500 - 8000 8000 8000 8000 8000 8000
slin24 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 14500 8500 14500 8500 - 8000 8000 8000 8000 8000
slin32 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 14500 8500 14500 8500 8500 - 8000 8000 8000 8000
slin44 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 14500 8500 14500 8500 8500 8500 - 8000 8000 8000
slin48 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 14500 8500 14500 8500 8500 8500 8500 - 8000 8000
slin96 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 14500 8500 14500 8500 8500 8500 8500 8500 - 8000
slin192 14500 14500 14500 14500 14500 8500 14500 14500 14500 14500 14500 8500 14500 8500 8500 8500 8500 8500 8500 -

5

Hi Everybody.

I fixed the above issue by installing the pri card again…

thanks always