Pb with TE220 card

Asterisk Asterisk Support
1

Hello,

i have a Digiul TE220 card plug in a Linux Unbuntu server with Asterisk 1.4.12.1, libpri 1.4.3 and zaptel driver 1.4.7.1.

When i start the zaptel script there is no issue:

The zztool software show me the 2 ports [color=red]Alarm: Unconfigured[/color]

Here is my configuration:

dmesg | grep Wildcard

Found a Wildcard: Wildcard TE220 (4th Gen)

lsmod | grep wct

wct4xxp 298880 0
zaptel 188676 3 wct4xxp

cat /etc/zaptel.conf

span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16

cat /etc/asterisk/zapata.conf

[channels]
language=nl
pridialplan=unknown
overlapdial=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
restrictcid=no
musiconhold=default
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocancelwhenbridged=yes
echotraining=yes
immediate=no
;nationalprefix=0
;internationalprefix=00
group=1
signalling=pri_cpe
switchtype=5ess
context=default
channel => 1-15,17-31
echocancel=no

Any idea will be welcomed…

2

Any ideas ?

up…up…up…

3

I beg to differ

Ztcfg fails, are there any other cards ?

Ian

4

no, only this card (TE220)…

Here is the output of the ztcfg:

[quote]# ztcfg -vvv

Zaptel Version: 1.4.9
Echo Canceller: MG2
Configuration

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)

31 channels to configure.

ZT_SPANCONFIG failed on span 1: Invalid argument (22)
[/quote]

Thanks for your help

5

Hi

Do you have alias wct2xxp wct4xxp in you modprobe.conf ?

this may be the issue

Ian

6

I have added the following line to the modprobe.conf:

# cat /etc/modprobe.conf ... alias wct2xxp wct4xxp

I have restarted the server but unfortunately, same issue…

# /etc/init.d/zaptel start Loading zaptel framework: [ OK ] Waiting for zap to come online...OK Loading zaptel hardware modules: wct2xxp. Running ztcfg: ZT_SPANCONFIG failed on span 1: Invalid argument (22) [FAILED]

The module is loaded:

# lsmod wct4xxp 298880 0 zaptel 188676 3 wct4xxp crc_ccitt 6337 1 zaptel

I am lost…

7

Any idea ?

Where can i find a clear procedure to install this Digium card TE220 on Linux ?

Nicolas

8

View on this post:

http://www.asteriskguru.com/board/resolvedte-220-pci-e-issue-vt3508.html

Imcompatibility of the TE220 card with AMD CPU…
Any patch available ???

9

Is your card set to T1 when it should be set to E1? You should change the jumpers accordingly - see the linked PFDs from the TE200 series user manual below.

The card with labels:
pdfmenot.com/view/http://pdfmeno … 30661d.pdf

Page about T1/E1 selection:

pdfmenot.com/view/http://pdfmeno … 392547.pdf

I was having the exact same problem as you except I have Trixbox installed. Changing the jumpers from T1 to E1 did the trick! :smiley:

I hope this helps. Good luck!

10

When i close the pins of the E1/T1 jumper, the card is no longer recognise by the system (dmesg or lspci).

Just another question, when i look on the documentation, there is 4 jumpers. On my card, only 2 jumpers:

Is it normal ???

11

Hi

One thing I did forget to mention. As this is a DIgium card have you raised a ticket with Digium and had them look at the issue?

Ian