Digium TE410P Quad Card

Asterisk Asterisk Support
1

Hi,

I am having Problems installing/configure my Digium TE410P Quad E1 Card. I have compiled zaptel 1.2.5 / build my own 2.6.16.1 Kernel and pluged in my Digum card of course :smile:
While booting the LEDs of the four ports of my Digium Card are flashing until the driver “wct4xxp” is loading.

My Zaptel.conf in /etc/

loadzone=nl
defaultzone=nl

span=1,1,2,ccs,hdb3,crc4
span=2,2,3,ccs,hdb3,crc4
span=3,3,2,ccs,hdb3,crc4
span=4,4,2,ccs,hdb3,crc4

bchan=1-15,17-31
dchan=16

bchan=32-46,48-62
dchan=47

bchan=63-77,79-93
dchan=78

bchan=94-108,110-124
dchan=109

When I am going to start ztcfg manualy it returns:
ZT_SPANCONFIG failed on span 1: No such device or address (6)

It looks like the card doesnt work for some reasons.

Output of “lspci”:
0000:02:02.0 Communication controller: Xilinx Corporation: Unknown device 0314 (rev 01)

Output of “lsmod”:
zaptel 228484 1 wct4xxp
crc_ccitt 3200 1 zaptel

Output of "cat /proc/interrupts"
209: 0 0 IO-APIC-level wct4xxp

So what is wrong with my card?

Thanks!

Greetings,
Bastian