As a test I switched my UTStarcom IAN-02ex from SIP mode to MGCP. I wanted to familiarize myself with MGCP in asterisk, I managed to get MGCP configured so that I can receive calls on the IAN-02ex over MGCP.
I however am unable to dial out
I turn mgcp debug on , all I see is the following , most of which appears immediatly after phone goes off hook.
(off hook)
– MGCP mgcp_new(MGCP/aaln/2@192.168.1.49-1) created in state: Down
> 0x1b0d0d8 – Strict RTP learning after remote address set to: 192.168.1.49:13456
> 0x1b0d0d8 – Strict RTP switching to RTP target address 192.168.1.49:13456 as source
> 0x1b0d0d8 – Strict RTP learning complete - Locking on source address 192.168.1.49:13456
(first digit dialed)
(immediate fast busy heard)
(hang up here)
– MGCP handle_request(aaln/2@192.168.1.49-1) ast_channel already destroyed, resending DLCX.
– MGCP handle_request(aaln/2@192.168.1.49) set vmwi(-)
The dial plan seems Okay and it is the same dial plan I used on SIP
extensions.conf I do not believe needs anything more for MGCP but I could be wrong…