Hi Everyone,
Now, I install Asterisk version 1.2.0 beta1 and connect with TE110P (ISDN-PRI) . This card connect to telco and I config zaptel.conf is below this. And I don’t know what 's happen? and Why? I think this case occur from telco link but I would like to check with Asterisk developer before. Because it’s make the caller and callee not hear together (like not bridge).
/zaptel.conf/
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
[color=blue]Nov 7 18:03:30 DEBUG[16434] channel.c: Got a FRAME_CONTROL (3) frame on channel Zap/14-1[/color]
[color=blue]Nov 7 18:03:30 DEBUG[16434] channel.c: Bridge stops bridging channels Zap/14-1 and SIP/2800-7a65[/color]
Nov 7 18:03:30 DEBUG[16434] channel.c: Driver for channel ‘SIP/2800-7a65’ does not support indication 3, emulating it
Nov 7 18:03:30 DEBUG[16434] channel.c: Scheduling timer at 160 sample intervals
Nov 7 18:03:30 DEBUG[16434] channel.c: Generator got voice, switching to phase locked mode
Nov 7 18:03:30 DEBUG[16434] channel.c: Scheduling timer at 0 sample intervals
Nov 7 18:03:30 DEBUG[16434] channel.c: Scheduling timer at 0 sample intervals
Nov 7 18:03:39 DEBUG[15539] chan_sip.c: Auto destroying call '510D18E9DB614A4E8FA63D585FE4DB77@171.1.1.191’
Nov 7 18:03:39 DEBUG[15539] chan_sip.c: Auto destroying call '64161f656a49ae8d2cb9ebed1ab298a0@171.1.2.151’
Nov 7 18:03:43 VERBOSE[15544] logger.c: – Channel 0/14, span 1 got hangup request
Nov 7 18:03:43 DEBUG[16434] channel.c: Didn’t get a frame from channel: Zap/14-1
Nov 7 18:03:43 DEBUG[16434] channel.c: Bridge stops bridging channels Zap/14-1 and SIP/2800-7a65
Nov 7 18:03:43 DEBUG[16434] chan_sip.c: update_user_counter(2800) - decrement inUse counter
Thanks a lot.
Bird.
[bird_aw@yahoo.com](mailto:bird_aw@yahoo.com)