Has anyone seen this before

Asterisk Asterisk Support
1

I am currently running Asterisk 1.2.4, the system has been stable for a very long time and now I am getting a repetative pattern on the CLI. The pattern is technically not repetative but it is very similar.

iti-ibex01CLI> set verbose 0
Verbosity is now OFF
LlVvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvsvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvLLvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvGvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvsvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvLLvLLLLLLLLLLlllllllVLlVLlVvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvLLvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvLLv
vvvvvvvvvvGvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvLlLvGvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvsvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvLLvvvvvvvvvvv
iti-ibex01CLI>

2

perhaps there is a can of beer leaning on the keyboard?

3

No bear on the keyboard, this can bee seen from mulitple terminals.

I just saw it again

< Ext: 1 Channel: 6 ] -- Processing IE 24 (cs0, Channel Identification) < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 292/0x124) (Terminator) < Message type: CONNECT (7) > Protocol Discriminator: Q.931 (8) len=5 > Call Ref: len= 2 (reference 292/0x124) (Originator) > Message type: CONNECT ACKNOWLEDGE (15) Vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvNEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect Request > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 292/0x124) (Originator)
4

if you are DAMN SURE this is not coming from a terminal somewhere, could be HDD corruption in the binary or a library. Try upgrading to the latest stable (which isn’t a bad idea as the latest one fixes a few iax security problems)

5

It isn’t a terminal so I am guessing an upgrade is in the plan.

I don’t have another explaination.

6

set verbose = 0 but what aout set debug ?

7

I have tried looking at this will all debugs off, some on Verbose to 1 3 and 5 and it is always the same. The second example I provided had debugging on for a pri span.

The first no debugging and verbose 0.

I work with a lot of Asterisk systems and this is a first for me, I was hoping I was not alone.

8

like others have said, perhaps just something goofy.

can you do a complete recompile of asterisk/libpri/zaptel? i’d try that before a total reformat.

9

i sugest checking what is logged to asterisk full log
mayby somethnig only throw those chars on stdout ?