Dadhi Don't hangup incomming calls

Hello!

I don’t now i this is the right forum.

Running asterisk now 1.7 & Dahdi 2.4.0 same result with 2.4.1.
Livning in sweden.

Ihave a problem with Card or Dahdi or Asterisk.

Fails to hangup incoming calls.Finally, I find the time that this happens

Outgoing call from asterisk works.

Incoming call frompots
Remote party hangs up. Card do a disconnect. Every thingworks like a charm.
Asterisk user hangs up, No disconnect. Untilremote party hangs up. Then i get a disconnect and asterisk see it asnew incoming call.

Is this issue related to the card or the driver?

Any suggestions.

/Fjonson

Cardboot
dahdi: Telephony InterfaceRegistered on major 196
dahdi: Version: 2.4.0
ALAW overrideparameter detected. Device will be operating in ALAW
dahdi:Registered Span 1 (‘WCTDM/4’) with 4 channels
dahdi: Span(‘WCTDM/4’) is new master
Freshmaker version: 71
Freshmakerpassed register test
ProSLIC on module 0, product 0, version0
Module 0: Not installed
ProSLIC on module 1, product 0,version 0
VoiceDAA System: 04
ISO-Cap is now up, line side: 03rev 06
setting FXO tx gain for card=1 to 0
setting FXO rx gainfor card=1 to 0
DEBUG fxotxgain:0.0 fxorxgain:0.0
Module 1:Installed – AUTO FXO (SWEDEN mode)
ProSLIC on module 2, product0, version 0
Module 2: Not installed
ProSLIC on module 3,product 0, version 0
Module 3: Not installed
Found a WildcardTDM: Wildcard TDM400P REV E/F (1 modules)
2295230744 Polarityreversed (0 -> 1)
BATTERY on 1/2 (+)!
dahdi: Registered tonezone 0 (United States / North America)
BATTERY on 1/2(+)!
dahdi_echocan_mg2: Registered echo canceler 'MG2’
dahdi:Registered tone zone 16 (Sweden)

Incommingcall no answer (OK)
2295356783Polarity reversed (1 -> -1)
2295359055Polarity reversed (-1 -> 1)
RING on 1/2!
NO RING on1/2!
RING on 1/2!
NO RING on 1/2!

Incommingcall remote party hangs up.(OK)
2295420266Polarity reversed (1 -> -1)
2295422522 Polarity reversed (-1 ->1)
RING on 1/2!
NO RING on 1/2!
2295427323 Polarity reversed(1 -> -1)
2295448831 Polarity reversed (-1 -> 1)

Incommingcall asterisk user hangs up.(FAIL)
2295512826Polarity reversed (1 -> -1)
2295515098 Polarity reversed (-1 ->1)
RING on 1/2!
NO RING on 1/2!
2295519851 Polarity reversed(1 -> -1)
Asterisk user did a hang up

This is recivethen remote user did hangup
2295541215 Polarity reversed (-1 ->1)

[channels]
language=se
usecallerid=yes
cidsignalling=dtmf
cidstart=polarity
hidecallerid=no
callwaiting=yes
restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
relaxdtmf=no
immediate=no
callerid = asreceived
useincomingcalleridondahditransfer = yes
busydetect=yes
busycount=3
busypattern=250,250
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
progzone=se
usedistinctiveringdetection=yes

hello

i’m having the same problem with a Digium 1FXO+1FXS card.
incoming call hangsup but * remains with the call active, and in this case, sends the call to voicemail, where i get calls with +20.000seconds duration …

Any solution?

thanks in advance