Goodmorning
i need to call some phone number i had create 10 different .call file but when i moved into /var/spool/asterisk/outcoming
with command cp *.call /var/spool/asterisk/outcoming he only execute 1 of 10 file
example
/etc/asterisk/test
1.call
2.call
3.call
cp *.call /var/spool/asterisk/outcoming
result
1.call
there is a way to make a tail of call?
thanks
Your path is wrong.
/var/spool/asterisk/outgoing is the correct path.
Also I would usually recommendeto use ‘mv’ vs ‘cp’ to move a file into the spool without updating it’s modification time.
sorry i write path wrong
/var/spool/asterisk/outgoing this is the correct path i use but if i create 10 call file like
1.call
2.call
3.call
etc
when i cp to /var/spool/asterisk/outgoing it move only 1 file
then is better use mv ?
Are you stopping the PBX while you are working in the spool?
Is it possible the PBX has processed your other calls and deleted them before you did your ls?
no i don’t stop the PBX.
no,because i make two file with two different phone number only 1 will processed
I would recommend setting the Archive flag on your call files and then looking in the outgoing_done directory to see what the status of your calls are.
You may also want to have the console running in another window when you move your calls into the spool so you can see what your PBX is executing.