I have a problem with the Bristuffed version of Asterisk. I have tried
Bristuff-0.3.0-pre-1m,n,o,p (Asterisk 1.2.6 to 22.214.171.124) but they all have
the same problem it seems:
A machine with a single hfc-s PCI BRI adapter running Gentoo 2.6.15.
Asterisk 1.2.0 (BRIstuffed-0.3.0-PRE-1) installed and working perfectly.
Grandstream gxp-2000 as a SIP phone, and a normal mobile phoneaccount to
test the ISDN connection to the outside world.
I try to upgrade the above setup to a newer version of Bristuff (to test if
the CDR problem is solved) so I download a new bristuff and install it. The
installation seems to go OK, the zaptel and zaphfc modules load with no
problems at all. But when I hang up a call, the line is not totally
disconnected. For instance: When I call from my internal SIP phone to the
mobile, and I hangup the SIP phone while the other side hasn’t picked up,
the mobile phone keeps on ringing. Or if I call from the outside to the SIP
phone, and hang up the mobile phone after a conversation, the SIP connection
to Asterisk is still there. Or the other way around: When I have a
conversation from the SIP phone to the mobile phone, and I hang up the SIP
phone, the connection to the mobile phone is still there.
I have tried a clean install of Asterisk+Bristuff as well as an upgrade from
the working Asterisk 1.2.0, but it gives me the same problem.
The only really strange thing I find in the logs that might have to do
something with this is the following line on the verbosed console:
chan_zap.c:8498 zt_pri_error: 1 updating callstate, peercallstate 2 to 1
loadzone = nl
and my zapata.conf:
internationalprefix = 00
nationalprefix = 0
channel => 1-2
I also made a full log and a console log of this problem. They can be found
Anyone has an idea where to look for a solution for this problem?