following this guide http://blog.keer.info/debian-asterisk-freepbx-complete-installation-guide/I have installed freebpx 2.9.0 on debian 7.1.0 64 bits, and all the process was ok till the asterisk restarting point to proceed with amportal installation, after i run /usr/src/freepbx-2.9.0/start_asterisk start it returns:
STARTING ASTERISK
Asterisk ended with exit status 1
Asterisk died with code 1.
cat: /var/run/asterisk/asterisk.pid: No such of file or directory
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
neither system reboot can solve this, nor any other method i 've tried.
Hi, 2.9.0 its an old version of FreePBX with some bugs and well known exploits. Try to use the latest 2.11
About the asterisk issue, run asterisk -vvvvvvcg and paste all the output.
Maybe you can also check /var/log/asterisk/full for errors. I’m sure that you will find something what can cause these restarts.
[quote=“navaismo”]Hi, 2.9.0 its an old version of FreePBX with some bugs and well known exploits. Try to use the latest 2.11
About the asterisk issue, run asterisk -vvvvvvcg and paste all the output.[/quote]
[code]root@FreePBX-Voip:~# asterisk -cg
Asterisk 1.8.22.0, Copyright © 1999 - 2012 Digium, Inc. and others.
Created by Mark Spencer markster@digium.com
Asterisk comes with ABSOLUTELY NO WARRANTY; type ‘core show warranty’ for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type ‘core show license’ for details.
[ Initializing Custom Configuration Options ]
[Aug 27 02:14:57] NOTICE[7177]: cdr.c:1582 do_reload: CDR simple logging enabled.
[Aug 27 02:14:57] NOTICE[7177]: loader.c:1176 load_modules: 203 modules will be loaded.
[Aug 27 02:14:57] NOTICE[7177]: res_odbc.c:1893 load_module: res_odbc loaded.
.[Aug 27 02:14:57] NOTICE[7177]: res_smdi.c:1418 load_module: No SMDI interfaces are available to listen on, not starting SMDI listener.
…[Aug 27 02:14:57] NOTICE[7177]: config.c:2226 ast_config_engine_register: Registered Config Engine odbc
.[Aug 27 02:14:57] NOTICE[7177]: config.c:2226 ast_config_engine_register: Registered Config Engine sqlite
.[Aug 27 02:14:57] WARNING[7177]: res_config_mysql.c:1468 load_mysql_config: MySQL RealTime: No database user found, using ‘asterisk’ as default.
[Aug 27 02:14:57] WARNING[7177]: res_config_mysql.c:1474 load_mysql_config: MySQL RealTime: No database password found, using ‘asterisk’ as default.
[Aug 27 02:14:57] WARNING[7177]: res_config_mysql.c:1480 load_mysql_config: MySQL RealTime: No database host found, using localhost via socket.
[Aug 27 02:14:57] WARNING[7177]: res_config_mysql.c:1486 load_mysql_config: MySQL RealTime: No database name found, using ‘asterisk’ as default.
[Aug 27 02:14:57] WARNING[7177]: res_config_mysql.c:1492 load_mysql_config: MySQL RealTime: No database port found, using 3306 as default.
[Aug 27 02:14:57] WARNING[7177]: res_config_mysql.c:1504 load_mysql_config: MySQL RealTime: No database socket found, using ‘/var/run/mysqld/mysqld.sock’ as default.
[Aug 27 02:14:57] WARNING[7177]: res_config_mysql.c:1509 load_mysql_config: MySQL RealTime: No database socket found (and unable to detect a suitable path).
[Aug 27 02:14:57] NOTICE[7177]: config.c:2226 ast_config_engine_register: Registered Config Engine mysql
…SIP channel loading…
.[Aug 27 02:14:57] NOTICE[7177]: chan_skinny.c:7260 config_load: Configuring skinny from skinny.conf
.[Aug 27 02:14:57] WARNING[7177]: chan_dahdi.c:17999 process_dahdi: Ignoring any changes to ‘userbase’ (on reload) at line 23.
[Aug 27 02:14:57] WARNING[7177]: chan_dahdi.c:17999 process_dahdi: Ignoring any changes to ‘vmsecret’ (on reload) at line 31.
[Aug 27 02:14:57] WARNING[7177]: chan_dahdi.c:17999 process_dahdi: Ignoring any changes to ‘hassip’ (on reload) at line 35.
[Aug 27 02:14:57] WARNING[7177]: chan_dahdi.c:17999 process_dahdi: Ignoring any changes to ‘hasiax’ (on reload) at line 39.
[Aug 27 02:14:57] WARNING[7177]: chan_dahdi.c:17999 process_dahdi: Ignoring any changes to ‘hasmanager’ (on reload) at line 47.
…[Aug 27 02:14:57] NOTICE[7177]: cdr_sqlite.c:206 load_module: This module has been marked deprecated in favor of using cdr_sqlite3_custom.
…[Aug 27 02:14:57] ERROR[7177]: codec_dahdi.c:602 find_transcoders: Failed to open /dev/dahdi/transcode: No such file or directory
…[Aug 27 02:14:57] NOTICE[7177]: chan_ooh323.c:2543 reload_config: Unable to load config ooh323.conf, OOH323 disabled
…[Aug 27 02:14:57] NOTICE[7177]: pbx_ael.c:164 pbx_load_module: Starting AEL load process.
[Aug 27 02:14:57] NOTICE[7177]: pbx_ael.c:177 pbx_load_module: AEL load process: parsed config file name ‘/etc/asterisk/extensions.ael’.
[Aug 27 02:14:57] NOTICE[7177]: pbx_ael.c:180 pbx_load_module: AEL load process: checked config file name ‘/etc/asterisk/extensions.ael’.
[Aug 27 02:14:57] NOTICE[7177]: pbx_ael.c:187 pbx_load_module: AEL load process: compiled config file name ‘/etc/asterisk/extensions.ael’.
[Aug 27 02:14:57] NOTICE[7177]: pbx_ael.c:192 pbx_load_module: AEL load process: merged config file name ‘/etc/asterisk/extensions.ael’.
[Aug 27 02:14:57] NOTICE[7177]: pbx_ael.c:195 pbx_load_module: AEL load process: verified config file name ‘/etc/asterisk/extensions.ael’.
… == Aliased CLI command ‘hangup request’ to ‘channel request hangup’
== Aliased CLI command ‘originate’ to ‘channel originate’
== Aliased CLI command ‘help’ to ‘core show help’
== Aliased CLI command ‘pri intense debug span’ to ‘pri set debug 2 span’
== Aliased CLI command ‘reload’ to ‘module reload’
[/code]
I don’t know why but /var/log/asterisk/full does not work with this distro, look
root@FreePBX-Voip:~# tail -f /var/log/asterisk/full
tail: no se puede abrir «/var/log/asterisk/full» para lectura: No existe el fichero o el directorio
You can enable logging by adding this to your /etc/asterisk/logger.conf file:
And then please run “logger reload” through the Asterisk CLI to changes take effect.
After this, look at the contents again in /var/log/asterisk/full
[quote=“leonardo07746”]
I don’t know why but /var/log/asterisk/full does not work with this distro, look
root@FreePBX-Voip:~# tail -f /var/log/asterisk/full
tail: no se puede abrir «/var/log/asterisk/full» para lectura: No existe el fichero o el directorio
[/quote]
[quote=“laszlob”]You can enable logging by adding this to your /etc/asterisk/logger.conf file:
And then please run “logger reload” through the Asterisk CLI to changes take effect.
After this, look at the contents again in /var/log/asterisk/full
[quote=“leonardo07746”]
I don’t know why but /var/log/asterisk/full does not work with this distro, look
root@FreePBX-Voip:~# tail -f /var/log/asterisk/full
tail: no se puede abrir «/var/log/asterisk/full» para lectura: No existe el fichero o el directorio
[/quote][/quote]
THANKS laszlob, I will do that, I’ m reinstalling Freebpx but 2.11 version instead, nevertheless I solved the unsteady restarting issue by adding the user and the group for asterisk groupadd asterisk
useradd -c "asterisk PBX" -d /var/lib/asterisk -g asterisk asterisk
[quote=“navaismo”]Hi, 2.9.0 its an old version of FreePBX with some bugs and well known exploits. Try to use the latest 2.11
About the asterisk issue, run asterisk -vvvvvvcg and paste all the output.[/quote]
Navaismo, when i m trying to install amp this is the output:
root@freebpx-asterisk:~# /usr/src/freepbx-2.11.0rc1/install_amp
Checking for PEAR DB..OK
Checking for PEAR Console::Getopt..OK
Checking user..OK
Checking if Asterisk is running..running with PID: 3412..OK
Checking for /etc/amportal.conf..OK
Reading /etc/amportal.conf..parsed amp_conf variables from /etc/amportal.conf:
amp_conf [AMPDBUSER] => [root]
amp_conf [AMPDBPASS] => [amp109]
amp_conf [AMPDBHOST] => [localhost]
amp_conf [AMPMGRUSER] => [admin]
amp_conf [AMPMGRPASS] => [admin]
amp_conf [AMPWEBROOT] => [/var/www/freepbx]
amp_conf [AMPWEBADDRESS] => [192.168.157.218]
amp_conf [AMPEXTENSIONS] => [extensions]
amp_conf [AMPBIN] => [/var/lib/asterisk/bin]
amp_conf [AMPSBIN] => [/usr/local/sbin]
amp_conf [AMPDBENGINE] => [mysql]
amp_conf [AMPDBNAME] => [asterisk]
amp_conf [AMPENGINE] => [asterisk]
amp_conf [ASTETCDIR] => [/etc/asterisk]
amp_conf [ASTMODDIR] => [/usr/lib/asterisk/modules]
amp_conf [ASTVARLIBDIR] => [/var/lib/asterisk]
amp_conf [ASTAGIDIR] => [/var/lib/asterisk/agi-bin]
amp_conf [ASTSPOOLDIR] => [/var/spool/asterisk]
amp_conf [ASTRUNDIR] => [/var/run/asterisk]
amp_conf [ASTLOGDIR] => [/var/log/asterisk]
OK
Checking for /etc/asterisk/asterisk.conf..OK
Reading /etc/asterisk/asterisk.conf..OK
Using asterisk as PBX Engine
Checking for Asterisk version..11.5.0
Checking for selinux..OK
Connecting to database..OK
Checking current version of AMP..2.9.0
Installing new FreePBX files..OK (0 files copied, 0 skipped)
no amportal..no fpbx..no freepbx_engine..no freepbx_setting..no gen_amp_conf..done
sh: 1: /var/lib/asterisk/bin/freepbx_engine: not found
sh: 1: /var/lib/asterisk/bin/freepbx_setting: not found
sh: 1: /var/lib/asterisk/bin/freepbx_setting: not found
sh: 1: /var/lib/asterisk/bin/freepbx_setting: not found
sh: 1: /var/lib/asterisk/bin/freepbx_setting: not found
sh: 1: /var/lib/asterisk/bin/freepbx_setting: not found
sh: 1: /var/lib/asterisk/bin/freepbx_setting: not found
apply username/password changes to conf files:
running apply_conf.sh from /etc/amportal.conf
Reading /etc/amportal.conf
Updating configuration...
/etc/asterisk/cdr_mysql.conf user: [root] password: [amp109] hostname: [localhost]
/etc/asterisk/manager.conf user: [admin] secret: [admin]
Done
done with apply_conf.sh
creating missing #include files..OK
OK
Setting permissions on files..sh: 1: /usr/local/sbin/amportal: not found
OK
Checking for upgrades..10 found
Upgrading to 2.10.0alpha1..
-> Running PHP script /usr/src/freepbx-2.11.0rc1/upgrades/2.10.0alpha1/migration.php
PHP Warning: include_once(/var/www/freepbx/admin/libraries/freepbx_conf.class.php): failed to open stream: No such file or directory in /usr/src/freepbx-2.11.0rc1/upgrades/2.10.0alpha1/migration.php on line 4
PHP Warning: include_once(): Failed opening '/var/www/freepbx/admin/libraries/freepbx_conf.class.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /usr/src/freepbx-2.11.0rc1/upgrades/2.10.0alpha1/migration.php on line 4
PHP Fatal error: Class 'freepbx_conf' not found in /usr/src/freepbx-2.11.0rc1/upgrades/2.10.0alpha1/migration.php on line 5
Why the freepbx.conf file and freepbx_setting aren’ t created yet, no wonder the so called migration.php script doesn’t work
Is this a new installation or an upgrade?