Hi all:
My config is as follows:
Digium TDM400P with FXO card in slot 1.
Asterisk 1.4.1
zaptel 1.4 on Ubuntu 6.06 LTS
zaptel and asterisk compiled. zaptel and wcfxo load fine (see ztcfg -vv below). When I try to do a module reload chan_zap.so, I get the following error shown below. I have attached the ztcfg output as well as the relevant zaptel.conf and zapatel.conf pieces. Any thoughts would be greatly welcome. I am at a loss, particularly since the hardware driver seems to load fine.
Pete
asterisk*CLI> module reload chan_zap.so
– Reloading module ‘chan_zap.so’ (Zapata Telephony)
== Parsing ‘/etc/asterisk/zapata.conf’: Found
[Mar 13 11:34:44] WARNING[3809]: chan_zap.c:11058 process_zap: Ignoring signaling
[Mar 13 11:34:44] ERROR[3809]: chan_zap.c:10410 build_channels: Unable to reconfigure channel ‘1’
[Mar 13 11:34:44] WARNING[3809]: chan_zap.c:11374 reload: Reload of chan_zap.so is unsuccessful!
ztcfg -vv
Zaptel Version: 1.4.0
Echo Canceller: MG2
Configuration
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
/etc/zaptel.conf
fxsks=1
defaultzone=us
loadzone=us
/etc/asterisk/zapata.conf
[channels]
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
signaling=fxs_ks
context=inbound
channel => 1
