hi ,
can some pls help me out with , the right configuration on my zaptel.conf file to function with a T4XXP pci e1 card.the following are the configuration i set on my zaptel.conf file,
span=1,1,0,esf,b8zs
span=2,2,0,ccs,hdb3,yellow
span=3,0,0,ccs,hdb3,crc4
span=4,3,0,ccs,hdb3,crc4,yellow
#channel configuration
bchan=1-5,17-31
dchan=16
bchan=32-46,48-62
dchan=47
bchan=63-77,79-93
dchan=78
bchan=94-108,110-124
dchan=109
loadzone=us
defualtzone=us
my config for zapata.conf
[channels]
;
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=no
transfer=yes
echocancel=yes
echotraining=yes
context=default
switchtype=national
signalling=fxs_ks
channel=>1
signalling=fxo_ks
channel=>2
when i run the command /sbin./ztcfg , i get the following error message ;
Notice: Configuration file is /etc/zaptel.conf
line 145: Channel 1 already configured as ‘Clear channel’ at line 66
line 146: Channel 2 already configured as ‘Clear channel’ at line 66
2 error(s) detected
and then if i run "reload chan_zap.so, i get the following error;
WARNING[6299]: chan_zap.c:10875 setup_zap: Ignoring switchtype
May 14 09:28:46 WARNING[6299]: chan_zap.c:10875 setup_zap: Ignoring signalling
May 14 09:28:46 ERROR[6299]: chan_zap.c:10306 setup_zap: Unable to reconfigure channel '1’
May 14 09:28:46 WARNING[6299]: chan_zap.c:11068 reload: Reload of chan_zap.so is unsuccessful!
can any one give me a hand out there , thanks .