Saydigit not working

Asterisk Asterisk Support
1

Hi,

We have configured asterisk 1.6.2.8 with libpri-1.4.11.1 and dahdi-linux-complete-2.3.0.1+2.3.0

the issue is say digit is ashowing the files are being played in the dbug but cannot hear any sounds as shown below

Executing [*30@processor:1] SayDigits(“SIP/507-0000000a”, “507”) in new stack
– <SIP/507-0000000a> Playing ‘digits/5.gsm’ (language ‘en’)
– <SIP/507-0000000a> Playing ‘digits/0.gsm’ (language ‘en’)
– <SIP/507-0000000a> Playing ‘digits/7.gsm’ (language ‘en’)

have anybody faced this issue

Regards

2

I have the same issue, I try to use SayNumber and don’t sounds, I made another extension and works fine SayNumber but not Say Digits
exten => 1555,1,SayDigits(123)
exten => 1555,n,BackGround(demo-congrats)
exten => 1555,n,SayNumber(233,f)
exten => 1555,n,SayNumber(${ODBC_TEST()},f)
exten => 1555,n,hangup

exten => 1444,1,wait(5)
exten => 1444,2,SayDigits(1234)
exten => 1444,n,SayNumber(${ODBC_TEST()})
exten => 1444,n,hangup

3

i have the same problem

-- Executing [1362@from_internal:1] Wait("SIP/102-00000023", "1") in new stack
-- Executing [1362@from_internal:2] SayDigits("SIP/102-00000023", "123") in new stack
-- <SIP/102-00000023> Playing 'digits/1[b].gsm[/b]' (language 'en')
-- <SIP/102-00000023> Playing 'digits/2[b].gsm[/b]' (language 'en')
-- <SIP/102-00000023> Playing 'digits/3[b].gsm[/b]' (language 'en')
-- Executing [1362@from_internal:3] Hangup("SIP/102-00000023", "") in new stack

i need to allow asterisk to use .ul sound format

4

Try it with giving Progress() before:

exten => 101,1,Wait(1) exten => 101,n,Progress() exten => 101,n,SayDigits(123) exten => 101,n,Hangup