OPENSSL installation appears to be missing or broken

Asterisk Asterisk Support
1

Hi~
I test VOIP with asterisk on RPI Board.
And I want to build :asterisk" source (tool chain : gcc-4.7-linaro-rpi-gnueabihf).
bu I can not complete build “asterisk” source.

To build “asterisk” source, First, I builded “openssl” source and, I succeeded “openssl” source build.
(There are in path :/usr/local/SSL/OPENSSL as the result of compile )

I try to do as follows :

  1. cd asterisk folder
  2. ./configure --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf CC="$GCCPATH/arm-linux-gnueabihf-gcc" LD="$GCCPATH/arm-linux-gnueabihf-ld" AR="$GCCPATH/arm-linux-gnueabihf-ar" CXX="$GCCPATH/arm-linux-gnueabihf-g++" STRIP="$GCCPATH/arm-linux-gnueabihf-strip" --with-ncurses=/home/weesj/opt/armlib/usr --disable-xmldoc --with-sqlite3=/home/weesj/opt/armlib/usr/local --with-ssl=/usr/local/SSL/OPENSSL

–> error :
configure: ***
configure: *** The OPENSSL installation appears to be missing or broken.
configure: *** Either correct the installation, or run configure
configure: *** including --without-ssl.

I compiled “opensssl” source. - version : openssl-1.0.1e

I wan to build asterisk source with cross compile.

Build server processor is X86, and RPI’s processor is arm.

When compile asterisk source in build server, the above error occurs.

please, tell me error reason and solution about this problem.

2

If configure fails, the documentation for configure says you need to look at config.log.

3

Hi~
I read config.log, but i cannot find out error reason.

please tell me error contents.

== config.log ==
OPENSsl-related information in the confgi.lo file is as follows:
$ ./configure --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf CC=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-gcc LD=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-ld AR=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-ar CXX=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-g++ STRIP=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-strip --with-ncurses=/home/weesj/opt/armlib/usr --disable-xmldoc --with-sqlite3=/home/weesj/opt/armlib/usr/local -with-ssl=/usr/local/SSL/OPENSSL
$ ./configure --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf CC=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-gcc LD=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-ld AR=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-ar CXX=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-g++ STRIP=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-strip --with-ncurses=/home/weesj/opt/armlib/usr --disable-xmldoc --with-sqlite3=/home/weesj/opt/armlib/usr/local -with-ssl=/usr/local/SSL/OPENSSL
$ ./configure --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf CC=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-gcc LD=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-ld AR=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-ar CXX=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-g++ STRIP=/home/weesj/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf-strip --with-ncurses=/home/weesj/opt/armlib/usr --disable-xmldoc --with-sqlite3=/home/weesj/opt/armlib/usr/local -with-ssl=/usr/local/SSL/OPENSSL
configure:7461: checking for openssl
configure:7479: found /usr/bin/openssl
configure:7495: result: usr/local/SSL/bin
configure:30422: checking for mandatory modules: NCURSES SQLITE3 OPENSSL
configure:30435: *** The OPENSSL installation appears to be missing or broken.
configure:30439: *** including --without-ssl.
ac_cv_path_OPENSSL=/usr/bin/openssl
ac_cv_path_OPENSSL=/usr/bin/openssl
AST_ASTERISKSSL=‘yes’
OPENSSL=‘usr/local/SSL/bin’
OPENSSL=‘usr/local/SSL/bin’
OPENSSL_DIR=’/usr/local/SSL/OPENSSL’
OPENSSL_DIR=’/usr/local/SSL/OPENSSL’
OPENSSL_DIR=’/usr/local/SSL/OPENSSL’
OPENSSL_INCLUDE=’‘
OPENSSL_LIB=’‘
OPENSSL_SRTP_DIR=’‘
OPENSSL_SRTP_INCLUDE=’‘
OPENSSL_SRTP_LIB=’'
PBX_OPENSSL='0’
PBX_OPENSSL_SRTP=‘0’