I’m having trouble with a Trixbox install getting my two digium cards up and running. I have a Digium TDM400P with a FXO (red) module in slots 3 and 4. I also have a TF410P with the echo cancellation board.
I’ve installed the newest version of Trixbox (currently v2.4.2.0) and the system boots and asterisk runs.
The bootup shows:
[color=darkred] loading zaptel module wct4xxp [FAILED]
loading zaptel module wctdm [OK]
running ztcfg ZT_SPANCONFIG failed on span 1: Invalid argument (22)
[FAILED]
[FAILED][/color]
When I attempt to run ztcfg myself I get:
[color=darkred]# ztcfg -vvvvv
Zaptel Version: 1.4.7.1-3259
Echo Canceller: OSLEC
Configuration
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: Clear channel (Default) (Slaves: 32)
Channel 33: Clear channel (Default) (Slaves: 33)
Channel 34: Clear channel (Default) (Slaves: 34)
Channel 35: Clear channel (Default) (Slaves: 35)
Channel 36: Clear channel (Default) (Slaves: 36)
Channel 37: Clear channel (Default) (Slaves: 37)
Channel 38: Clear channel (Default) (Slaves: 38)
Channel 39: Clear channel (Default) (Slaves: 39)
Channel 40: Clear channel (Default) (Slaves: 40)
Channel 41: Clear channel (Default) (Slaves: 41)
Channel 42: Clear channel (Default) (Slaves: 42)
Channel 43: Clear channel (Default) (Slaves: 43)
Channel 44: Clear channel (Default) (Slaves: 44)
Channel 45: Clear channel (Default) (Slaves: 45)
Channel 46: Clear channel (Default) (Slaves: 46)
Channel 47: Clear channel (Default) (Slaves: 47)
Channel 48: D-channel (Default) (Slaves: 48)
Channel 49: Clear channel (Default) (Slaves: 49)
Channel 50: Clear channel (Default) (Slaves: 50)
Channel 51: Clear channel (Default) (Slaves: 51)
Channel 52: Clear channel (Default) (Slaves: 52)
Channel 53: Clear channel (Default) (Slaves: 53)
Channel 54: Clear channel (Default) (Slaves: 54)
Channel 55: Clear channel (Default) (Slaves: 55)
Channel 56: Clear channel (Default) (Slaves: 56)
Channel 57: Clear channel (Default) (Slaves: 57)
Channel 58: Clear channel (Default) (Slaves: 58)
Channel 59: Clear channel (Default) (Slaves: 59)
Channel 60: Clear channel (Default) (Slaves: 60)
Channel 61: Clear channel (Default) (Slaves: 61)
Channel 62: Clear channel (Default) (Slaves: 62)
Channel 63: Clear channel (Default) (Slaves: 63)
Channel 64: Clear channel (Default) (Slaves: 64)
Channel 65: Clear channel (Default) (Slaves: 65)
Channel 66: Clear channel (Default) (Slaves: 66)
Channel 67: Clear channel (Default) (Slaves: 67)
Channel 68: Clear channel (Default) (Slaves: 68)
Channel 69: Clear channel (Default) (Slaves: 69)
Channel 70: Clear channel (Default) (Slaves: 70)
Channel 71: Clear channel (Default) (Slaves: 71)
Channel 72: D-channel (Default) (Slaves: 72)
Channel 73: Clear channel (Default) (Slaves: 73)
Channel 74: Clear channel (Default) (Slaves: 74)
Channel 75: Clear channel (Default) (Slaves: 75)
Channel 76: Clear channel (Default) (Slaves: 76)
Channel 77: Clear channel (Default) (Slaves: 77)
Channel 78: Clear channel (Default) (Slaves: 78)
Channel 79: Clear channel (Default) (Slaves: 79)
Channel 80: Clear channel (Default) (Slaves: 80)
Channel 81: Clear channel (Default) (Slaves: 81)
Channel 82: Clear channel (Default) (Slaves: 82)
Channel 83: Clear channel (Default) (Slaves: 83)
Channel 84: Clear channel (Default) (Slaves: 84)
Channel 85: Clear channel (Default) (Slaves: 85)
Channel 86: Clear channel (Default) (Slaves: 86)
Channel 87: Clear channel (Default) (Slaves: 87)
Channel 88: Clear channel (Default) (Slaves: 88)
Channel 89: Clear channel (Default) (Slaves: 89)
Channel 90: Clear channel (Default) (Slaves: 90)
Channel 91: Clear channel (Default) (Slaves: 91)
Channel 92: Clear channel (Default) (Slaves: 92)
Channel 93: Clear channel (Default) (Slaves: 93)
Channel 94: Clear channel (Default) (Slaves: 94)
Channel 95: Clear channel (Default) (Slaves: 95)
Channel 96: D-channel (Default) (Slaves: 96)
Channel 99: FXS Kewlstart (Default) (Slaves: 99)
Channel 100: FXS Kewlstart (Default) (Slaves: 100)
98 channels to configure.
ZT_SPANCONFIG failed on span 1: Invalid argument (22)[/color]
I’ve tried searching online for this problem, but I cannot find a solution specific to my cards and install. Some reference reinstallation of drivers, but I’m not savvy enough with the commands to perform some of those tricks.
Other posts ask for zapata and zaptel configs. Since ztcfg is failing, I don’t appear to have a zaptel.conf, but here is my zapata.conf:
[color=darkred];
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf[/color]
Any help would be appreciated. Thank you,
Dickon…