I keep getting the error
when I started the box I got “calling start up (flags is 4099)”
on the cli I see,
Jan 15 15:16:20 NOTICE[2855]: chan_zap.c:8194 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
what is this telling me?
My t1 per the phone company is a partial t1
the teclo has a cisco router that splits the t1 into a t1 and data
my asterisk box is connected to the cisco router with a cross over cable, I only get a redlight on the card with a normal cable
the telco told me that I channels 0-4 are voice, and 24 is the d channel
framing = esf
line coding = b8zs
switch type = isdn
signaling - pri
they are providing the clock source
version
BusinessEdition_B.1_3-0.12-1
zaptel.conf
loadzone = us
defaultzone=us
span=1,1,0,esf,b8zs
bchan=1-5
dchan=24
zapata.conf
[channels]
context=default
switchtype=national
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
signalling=pri_cpe
group=1
context=from-pstn
channel=1-5
zttool
Current Alarms: No alarms.
│ Sync Source: Internally clocked
│ IRQ Misses: 0
│ Bipolar Viol: 0
│ Tx/Rx Levels: 0/ 0
│ Total/Conf/Act: 24/ 6/ 0
│ 111111111122222 ┌──────
│ 123456789012345678901234 │ Back
│ TxA ----- - └──────
│ TxB ----- -
│ TxC ----- -
│ TxD ----- -
│ ┌──────
│ RxA ----- - │ Loop
│ RxB ----- - └──────
│ RxC ----- -
│ RxD ----- -
ztcfg
Zaptel Configuration
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 24: D-channel (Default) (Slaves: 24)
6 channels configured.