Installing TE410P/TE405P (1st Gen) on 3.2.0-2-686-pae

Hi,

im having trouble inslling a te410 quad on 3.2.0-2-686-pae. After installing dahdi 2.6.1 and asterisk 1.8.13 even if i have a loop on one port it remains in alarm RED. With dahdi 2.6.0 all ports were alarm free but i didnt had anything connected on them.
dahdi_hardware
pci:0000:01:03.0 wct4xxp+ 10ee:0314 Wildcard TE410P/TE405P (1st Gen)

dahdi_cfg -vv
DAHDI Tools Version - 2.6.1

DAHDI Version: 2.6.1
Echo Canceller(s): HWEC, MG2
Configuration

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
Channel 07: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 07)
Channel 08: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 08)
Channel 09: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 09)
Channel 10: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 10)
Channel 11: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 11)
Channel 12: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 12)
Channel 13: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 13)
Channel 14: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 14)
Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15)
Channel 16: D-channel (Default) (Echo Canceler: none) (Slaves: 16)
Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17)
Channel 18: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 18)

dahdi-channels.conf

Span 1: TE4/0/1 “T4XXP (PCI) Card 0 Span 1” HDB3/CCS/CRC4 RED
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
context = default
group = 63

; Span 2: TE4/0/2 “T4XXP (PCI) Card 0 Span 2” HDB3/CCS/CRC4 RED
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 32-46,48-62
context = default
group = 63

; Span 3: TE4/0/3 “T4XXP (PCI) Card 0 Span 3” (MASTER) HDB3/CCS/CRC4 RED
group=0,13
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 63-77,79-93
context = default
group = 63

; Span 4: TE4/0/4 “T4XXP (PCI) Card 0 Span 4” HDB3/CCS/CRC4 RED
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 94-108,110-124
context = default
group = 63

any ideea?

Regards,

Your best option is to contact Digium technical support for help with this.

The difference that you saw between 2.6.0 and 2.6.1 can be attributed I believe to r10565 “wct4xxp: __t4_frame_in and __t4_framer_out slowdowns.”, but technical support is in the best position to determine why the 1st Gen quad span card isn’t working on this platform.