IAX Inbound Issue Please assist Call donont reaach my Phone

opensource1 · June 5, 2008, 5:51pm

Configuration with Carrier
IAX2/942016:XXXXXXXX@myip.com

OUR SERVER CONFIGURATIONS

EXTENSIONS.CONF

[general]
static=yes
writeprotect=no

[globals]
CONSOLE=Console/dsp ; Console interface for demo
;TRUNK=Zap/g1 ; Trunk interface
;TRUNKZ=Zap/g2
TRUNKX=SIP ; 2nd trunk interface
TRUNKIAX=IAX2 ; IAX trunk interface

[default]
;GRADWELL Inbound number 0800 8620082
exten => 08008620082,1,Playback,transfer|skip
exten => 08008620082,2,Dial,IAX2/942016
exten => 08008620082,3,StopMonitor()

IAX.CONF

[general]
port=4569
bindaddr = 0.0.0.0
context=default

[942016]
username=942016
secret=XXXXXXXX
disallow=all
allow=ulaw
allow=alaw
allow=gsm
allow=g729
type=peer
host=dynamic
dtmfmode=rfc2833
qualify=1000
canreinvite = no

IAX DEBUG CLI

SIP/google-090224c8 answered SIP/1175-08fa5258
– Executing MixMonitor(“SIP/1175-08f5dd58”, “/usr/local/recordings/May-08/448008620082-20080531-200955-.wav|bv(0)V(0)”) in new stack
– Executing Dial(“SIP/1175-08f5dd58”, “SIP/448008620082@google|55|r|o”) in new stack
– Called 448008620082@google
== Begin MixMonitor Recording SIP/1175-08f5dd58
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00010ms SCall: 00004 DCall: 00000 [193.111.201.99:4569]
VERSION : 2
CALLED NUMBER : s
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-05-31 16:13:02

May 31 20:09:57 NOTICE[4060]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.99, who was trying to reach 's@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00012ms SCall: 00003 DCall: 00004 [193.111.201.99:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00012ms SCall: 00004 DCall: 00003 [193.111.201.99:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00005ms SCall: 00008 DCall: 00000 [193.111.201.100:4569]
VERSION : 2
CALLED NUMBER : s
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-05-31 16:13:02

May 31 20:09:57 NOTICE[4060]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach 's@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00009ms SCall: 00004 DCall: 00008 [193.111.201.100:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00009ms SCall: 00008 DCall: 00004 [193.111.201.100:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00013ms SCall: 00004 DCall: 00000 [193.111.201.114:4569]
VERSION : 2
CALLED NUMBER : s
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-05-31 16:13:02

May 31 20:09:57 NOTICE[4060]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach 's@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00013ms SCall: 00005 DCall: 00004 [193.111.201.114:4569]
CAUSE : No authority found
CAUSE CODE : 50

CLI REPORT OF CARRIER SERVER IS AS FOLLOW

32:[2008-06-05 18:31:41] – Executing Dial(“SIP/87.238.72.149-b777c618”, “IAX2/942016:XXXXXXXX@myip.com”)
33:[2008-06-05 18:31:41] – Called 942016:XXXXXXXX@myip.com
34:[2008-06-05 18:31:41] DEBUG[31180]: pbx.c:946 pbx_find_extension: Searching for extension 7040082 in su
35:[2008-06-05 18:31:41] WARNING[1990]: chan_iax2.c:7372 socket_process: Call rejected by myip.com: No authority found

ianplain · June 5, 2008, 7:06pm

Hi

Im guessing that you havent read the knowledge base article at portal.gradwell.net/support.php/ … cle_id/225
you will see that

IAX2/942016:XXXXXXXX@myip.com
should be
IAX2/942016:XXXXXXXX@myip.com/08008620082

since you need a destination for the call.

Ian

opensource1 · June 6, 2008, 9:36am

CLI ERROR

Jun 6 10:33:13 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach '08008620082@'
Jun 6 10:33:14 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach '448008620082@'
Jun 6 10:33:14 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.99, who was trying to reach '448008620082@'
Jun 6 10:33:17 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach '08008620082@'
Jun 6 10:33:17 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach '448008620082@'
Jun 6 10:33:17 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.99, who was trying to reach ‘448008620082@’

opensource1 · June 6, 2008, 10:10am

Thanks for the reply After Making changes I thought lets attach the IAX Debug problem is still there

– Called 448008620082@esms-out
== Begin MixMonitor Recording SIP/2020-b7a45d10
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00005ms SCall: 00001 DCall: 00000 [193.111.201.100:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 11:07:32

Jun 6 11:05:47 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00013ms SCall: 00002 DCall: 00001 [193.111.201.100:4569]
CAUSE : No authority found
CAUSE CODE : 50

ianplain · June 6, 2008, 11:17am

Hi Have you changed your extensions.conf and iax.conf to match what is in the article i put the link to . IE added the context to the IAX peer and also sent it to a sensible detination as at the moment it seems to go to an odd one.

Ian

opensource1 · June 6, 2008, 3:00pm

I have done it even added context like it says in grawellso attaching new files here

IAX.CONF

[general]
;port=5036
port=4569
; bindport and bindaddr may be specified
bindaddr = 0.0.0.0
jitterbuffer=yes

[942016]
type=peer
username=942016
secret=XXXXXXXX
context=gradwell-in
disallow=all
allow=ulaw
allow=alaw
allow=gsm
allow=g729
host=dynamic
dtmfmode=rfc2833
qualify=1000

EXTENSIONS.CONF

[general]
static=yes
writeprotect=no
[globals]
CONSOLE=Console/dsp
;TRUNK=Zap/g1
;TRUNKZ=Zap/g2
TRUNKX=SIP
TRUNKIAX=IAX2

[gradwell-in]
;GRADWELL Inbound number 0800 8620082
exten => 448008620082,1,Playback,transfer|skip
exten => 448008620082,n,Dial,IAX2/942016
exten => 448008620082,n,StopMonitor()

[default]
include => parkedcalls
exten => 400,1,Parkedcall(701-720)
exten => 400,2,Hangup()

CLI WITH DEBUG

– Executing SetCallerID(“SIP/2020-b7a58f90”, ““unknown” <0>”) in new stack
– Executing Dial(“SIP/2020-b7a58f90”, “SIP/448008620082@esms-out”) in new stack
– Called 448008620082@esms-out
== Begin MixMonitor Recording SIP/2020-b7a58f90
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00010ms SCall: 00016 DCall: 00000 [193.111.201.114:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 15:55:24

Jun 6 15:53:41 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00004ms SCall: 00006 DCall: 00016 [193.111.201.114:4569]
CAUSE : No authority found
CAUSE CODE : 50

Gradwell Settings

IAX2/942016:XXXXXXXX@202.125.156.186/448008620082

opensource1 · June 6, 2008, 3:04pm

I have done it even added context like it says in grawell so attaching new files here

IAX.CONF

[general]
;port=5036
port=4569
; bindport and bindaddr may be specified
bindaddr = 0.0.0.0
jitterbuffer=yes

[942016]
type=peer
username=942016
secret=XXXXXXXX
context=gradwell-in
disallow=all
allow=ulaw
allow=alaw
allow=gsm
allow=g729
host=dynamic
dtmfmode=rfc2833
qualify=1000

EXTENSIONS.CONF

[general]
static=yes
writeprotect=no
[globals]
CONSOLE=Console/dsp
;TRUNK=Zap/g1
;TRUNKZ=Zap/g2
TRUNKX=SIP
TRUNKIAX=IAX2

[gradwell-in]
;GRADWELL Inbound number 0800 8620082
exten => 448008620082,1,Playback,transfer|skip
exten => 448008620082,n,Dial,IAX2/942016
exten => 448008620082,n,StopMonitor()

[default]
include => parkedcalls
exten => 400,1,Parkedcall(701-720)
exten => 400,2,Hangup()

CLI WITH DEBUG

– Executing SetCallerID(“SIP/2020-b7a58f90”, ““unknown” <0>”) in new stack
– Executing Dial(“SIP/2020-b7a58f90”, “SIP/448008620082@esms-out”) in new stack
– Called 448008620082@esms-out
== Begin MixMonitor Recording SIP/2020-b7a58f90
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00010ms SCall: 00016 DCall: 00000 [193.111.201.114:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 15:55:24

Jun 6 15:53:41 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00004ms SCall: 00006 DCall: 00016 [193.111.201.114:4569]
CAUSE : No authority found
CAUSE CODE : 50

Gradwell Settings

IAX2/942016:XXXXXXXX@202.125.156.186/448008620082

opensource1 · June 6, 2008, 3:15pm

Sorry dear I am new in IAX try all but never worked thought to attach iax2 phone peer information

Name/Username Host Mask Port Status
942016/942016 192.168.1.92 (D) 255.255.255.255 4569 (T) OK (2 ms)

ianplain · June 6, 2008, 4:00pm

Hi

[quote][gradwell-in]
;GRADWELL Inbound number 0800 8620082
exten => 448008620082,1,Playback,transfer|skip
exten => 448008620082,n,Dial,IAX2/942016
exten => 448008620082,n,StopMonitor()

[/quote]

This will not work,

for testing

[quote][gradwell-in]
;GRADWELL Inbound number 0800 8620082
exten => 448008620082,1,Playback(beep)
exten => 448008620082,n,Playback(tt-weasels.gsm)
exten => 448008620082,n,Hangup()

[quote]and
[/quote]

Then see what happens
[/quote]

opensource1 · June 6, 2008, 4:19pm

THIS IS REPLY AFTER ADDING THE CONFIGURATION YOU SENT

CLI DEBUG

– Executing MixMonitor(“SIP/2020-b7a58f90”, “/usr/local/recordings/Jun-08/448008620082-20080606-171537-.wav|bv(0)V(0)”) in new stack
– Executing SetCallerID(“SIP/2020-b7a58f90”, ““unknown” <0>”) in new stack
– Executing Dial(“SIP/2020-b7a58f90”, “SIP/448008620082@esms-out”) in new stack
We’re at 202.125.156.186 port 10056
Adding codec 0x100 (g729) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
14 headers, 11 lines
Reliably Transmitting (no NAT) to 194.0.210.200:5060:
INVITE sip:448008620082@outbound.esms.com SIP/2.0
Via: SIP/2.0/UDP 202.125.156.186:5060;branch=z9hG4bK1ff74fcc;rport
From: “unknown” sip:0@202.125.156.186;tag=as3978c955
To: sip:448008620082@outbound.esms.com
Contact: sip:0@202.125.156.186
Call-ID: 6260c59155f4cbd57ee55e5f542a7aec@202.125.156.186
CSeq: 102 INVITE
User-Agent: watever
Max-Forwards: 70
Remote-Party-ID: “unknown” sip:0@202.125.156.186;privacy=off;screen=no
Date: Fri, 06 Jun 2008 12:15:37 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Content-Type: application/sdp
Content-Length: 243

v=0
o=root 3940 3940 IN IP4 202.125.156.186
s=session
c=IN IP4 202.125.156.186
t=0 0
m=audio 10056 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -

-- Called 448008620082@esms-out

== Begin MixMonitor Recording SIP/2020-b7a58f90
Asterisk*CLI>
<-- SIP read from 194.0.210.200:5060:
SIP/2.0 100 Giving a try
Via: SIP/2.0/UDP 202.125.156.186:5060;branch=z9hG4bK1ff74fcc;rport=5060
From: “unknown” sip:0@202.125.156.186;tag=as3978c955
To: sip:448008620082@outbound.esms.com
Call-ID: 6260c59155f4cbd57ee55e5f542a7aec@202.125.156.186
CSeq: 102 INVITE
eSMS SIP Proxy
Content-Length: 0

— (8 headers 0 lines) —
Jun 6 17:15:39 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach '448008620082@'
Jun 6 17:15:39 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach '448008620082@'
Jun 6 17:15:40 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.99, who was trying to reach '448008620082@'
Jun 6 17:15:41 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach '448008620082@'
Asterisk*CLI> exit

ianplain · June 6, 2008, 6:39pm

Hi
Ok stick context=gradwell-in in the general section of you iax.conf

then turn off sip debugging and set verbose to o and trun on iax debugging as thats all we are interested in.

Its a context issue to be sure

Ian

opensource1 · June 6, 2008, 7:18pm

FISRT OF ALL THANKS ALOT FOR YOUTR TIME
AS GUIDED DONE BUT NO LUCK DEBUG OF IAX AS FOLLOW

Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00003ms SCall: 00015 DCall: 00000 [193.111.201.100:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 20:17:50

Jun 6 20:16:05 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00014ms SCall: 00009 DCall: 00015 [193.111.201.100:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00014ms SCall: 00015 DCall: 00009 [193.111.201.100:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00003ms SCall: 00009 DCall: 00000 [193.111.201.99:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 20:17:50

Jun 6 20:16:05 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.99, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00010ms SCall: 00010 DCall: 00009 [193.111.201.99:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00010ms SCall: 00009 DCall: 00010 [193.111.201.99:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00014ms SCall: 00017 DCall: 00000 [193.111.201.114:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 20:17:50

Jun 6 20:16:06 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00001ms SCall: 00011 DCall: 00017 [193.111.201.114:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00001ms SCall: 00017 DCall: 00011 [193.111.201.114:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00009ms SCall: 00011 DCall: 00000 [193.111.201.114:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 20:17:52

Jun 6 20:16:07 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.114, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00016ms SCall: 00012 DCall: 00011 [193.111.201.114:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00016ms SCall: 00011 DCall: 00012 [193.111.201.114:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00003ms SCall: 00019 DCall: 00000 [193.111.201.99:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 20:17:52

Jun 6 20:16:07 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.99, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00009ms SCall: 00013 DCall: 00019 [193.111.201.99:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00009ms SCall: 00019 DCall: 00013 [193.111.201.99:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW
Timestamp: 00005ms SCall: 00016 DCall: 00000 [193.111.201.100:4569]
VERSION : 2
CALLED NUMBER : 448008620082
CODEC_PREFS : ()
CALLING NUMBER :
CALLING PRESNTN : 0
CALLING TYPEOFN : 0
CALLING TRANSIT : 0
CALLING NAME : unknown
LANGUAGE : en
USERNAME : 942016
FORMAT : 8
CAPABILITY : 65407
ADSICPE : 2
DATE TIME : 2008-06-06 20:17:52

Jun 6 20:16:08 NOTICE[4071]: chan_iax2.c:6933 socket_read: Rejected connect attempt from 193.111.201.100, who was trying to reach '448008620082@'
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJECT
Timestamp: 00017ms SCall: 00014 DCall: 00016 [193.111.201.100:4569]
CAUSE : No authority found
CAUSE CODE : 50

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00017ms SCall: 00016 DCall: 00014 [193.111.201.100:4569]
– Got SIP response 486 “Busy Here” back from 194.0.210.200
– SIP/esms-out-0a9d9d50 is busy
== Everyone is busy/congested at this time (1:1/0/0)
– Executing StopMonitor(“SIP/2020-b7a58f90”, “”) in new stack
– Executing Congestion(“SIP/2020-b7a58f90”, “”) in new stack
== Spawn extension (default, 9448008620082, 5) exited non-zero on ‘SIP/2020-b7a58f90’
== End MixMonitor Recording SIP/2020-b7a58f90
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: POKE
Timestamp: 00017ms SCall: 00015 DCall: 00000 [192.168.1.92:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00017ms SCall: 01733 DCall: 00015 [192.168.1.92:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: PONG
Timestamp: 00017ms SCall: 01733 DCall: 00015 [192.168.1.92:4569]
RR_JITTER : 0

Tx-Frame Retry[-01] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00017ms SCall: 00015 DCall: 01733 [192.168.1.92:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00003ms SCall: 01734 DCall: 00000 [192.168.1.92:4569]
USERNAME : 942016
REFRESH : 60

Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REGAUTH
Timestamp: 00008ms SCall: 00006 DCall: 01734 [192.168.1.92:4569]
AUTHMETHODS : 3
CHALLENGE : 169910928
USERNAME : 942016

Rx-Frame Retry[ No] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: REGREQ
Timestamp: 00003ms SCall: 01734 DCall: 00006 [192.168.1.92:4569]
USERNAME : 942016
MD5 RESULT : 9ac9c456ff3089397eb70925b2944338
Asterisk*CLI>
Tx-Frame Retry[000] – OSeqno: 001 ISeqno: 002 Type: IAX Subclass: REGACK
Timestamp: 00013ms SCall: 00006 DCall: 01734 [192.168.1.92:4569]
USERNAME : 942016
DATE TIME : 2008-06-06 20:16:24
REFRESH : 60
APPARENT ADDRES : IPV4 192.168.1.92:4569

Rx-Frame Retry[ No] – OSeqno: 002 ISeqno: 002 Type: IAX Subclass: ACK
Timestamp: 00013ms SCall: 01734 DCall: 00006 [192.168.1.92:4569]
Tx-Frame Retry[000] – OSeqno: 000 ISeqno: 000 Type: IAX Subclass: POKE
Timestamp: 00005ms SCall: 00007 DCall: 00000 [192.168.1.92:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00005ms SCall: 01735 DCall: 00007 [192.168.1.92:4569]
Rx-Frame Retry[ No] – OSeqno: 000 ISeqno: 001 Type: IAX Subclass: PONG
Timestamp: 00005ms SCall: 01735 DCall: 00007 [192.168.1.92:4569]
RR_JITTER : 0
AsteriskCLI> ex
Tx-Frame Retry[-01] – OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK
Timestamp: 00005ms SCall: 00007 DCall: 01735 [192.168.1.92:4569]
AsteriskCLI> exit

ianplain · June 6, 2008, 8:26pm

Hi

The last config posted still doesnt match with the knowledge base.#

It sows the type as peer change it to user also in the general section of th eiax.conf set some codecs.

It might be good to post the latest versions just so we can see

Ian

www.cyber-cottage.co.uk

opensource1 · June 11, 2008, 2:01pm

Thanks alot problem sorted although left the codes in iax.conf user settings
but added context=gradwell-in in extensions.conf default section
regarding type i have changed to friend and all working perfect thanks for your help once again I really appreciate it.