Hi All,
I am not sure of what to put in zapata.conf or zaptel.conf for a second x100 card.
I tried adding
fxsks=1-2 in zaptel.conf
and
channel=>2 in zapata.conf
and reloaded the driver zaptel and wcfxo, and then ran ztcfg and got:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
ZT_CHANCONFIG failed on channel 2: No such device or address (6)
Can anyone assist me with this.
TIA!