Hi all.
I have been trying for days to get our new asterisk installation (Asterisknow with freepbx) to make outgoing call through pri. I installed a TE134 single span PRI card. Setup everything I could, but when I make a outgoing call through it the pri debug/trace shows after about 5 to 8 seconds after passing the number to the PRI an error T303 timed out is returned. The dialed phone never rings. I have tried hundreds of different settings from googling the problem but got nowhere. Can someone maybe help with debugging this problem. I attach a snipped from the debug info:
[quote]PRI Span: 1 > TEI: 0 State 7(Multi-frame established)
PRI Span: 1 > V(A)=3, V(S)=3, V®=0
PRI Span: 1 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 > T200_id=0, N200=3, T203_id=8192
PRI Span: 1 > [ 00 01 06 00 08 02 00 02 05 04 03 80 90 a3 18 03 a1 83 82 6c 0c 0 0 80 30 31 31 34 39 34 36 33 31 30 70 0b 80 30 37 39 34 39 35 34 35 38 32 a1 ]
PRI Span: 1 > Informational frame:
PRI Span: 1 > SAPI: 00 C/R: 0 EA: 0
PRI Span: 1 > TEI: 000 EA: 1
PRI Span: 1 > N(S): 003 0: 0
PRI Span: 1 > N®: 000 P: 0
PRI Span: 1 > 43 bytes of data
PRI Span: 1 > Protocol Discriminator: Q.931 (8) len=43
PRI Span: 1 > TEI=0 Call Ref: len= 2 (reference 2/0x2) (Sent from originator)
PRI Span: 1 > Message Type: SETUP (5)
PRI Span: 1 > [04 03 80 90 a3]
PRI Span: 1 > Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability: Speech (0)
PRI Span: 1 > Ext: 1 Trans mode/rate: 64kbps, circ uit-mode (16)
PRI Span: 1 > User information layer 1: A-Law (35 )
PRI Span: 1 > [18 03 a1 83 82]
PRI Span: 1 > Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Preferred Dchan: 0
PRI Span: 1 > ChanSel: As indicated in following octets
PRI Span: 1 > Ext: 1 Coding: 0 Number Specified Channel Type: 3
PRI Span: 1 > Ext: 1 Channel: 2 Type: CPE]
PRI Span: 1 > [6c 0c 00 80 30 31 31 34 39 34 36 33 31 30]
PRI Span: 1 > Calling Number (len=14) [ Ext: 0 TON: Unknown Number Type (0) NP I: Unknown Number Plan (0)
PRI Span: 1 > Presentation: Presentation permitted, us er number not screened (0) ‘0114946310’ ]
PRI Span: 1 > [70 0b 80 30 37 39 34 39 35 34 35 38 32]
PRI Span: 1 > Called Number (len=13) [ Ext: 1 TON: Unknown Number Type (0) NPI : Unknown Number Plan (0) ‘0794954582’ ]
PRI Span: 1 > [a1]
PRI Span: 1 > Sending Complete (len= 1)
PRI Span: 1 – Stopping T203 timer
PRI Span: 1 – Starting T200 timer
PRI Span: 1
PRI Span: 1 < TEI: 0 State 7(Multi-frame established)
PRI Span: 1 < V(A)=3, V(S)=4, V®=0
PRI Span: 1 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=8192, N200=3, T203_id=0
PRI Span: 1 < [ 00 01 01 08 ]
PRI Span: 1 < Supervisory frame:
PRI Span: 1 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 1 < TEI: 000 EA: 1
PRI Span: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 1 < N®: 004 P/F: 0
PRI Span: 1 < 0 bytes of data
PRI Span: 1 – Got ACK for N(S)=3 to (but not including) N(S)=4
PRI Span: 1 – ACKing N(S)=3, tx_queue head is N(S)=-1 (-1 is empty, -2 is not t ransmitted)
PRI Span: 1 – Stopping T200 timer
PRI Span: 1 – Starting T203 timer
PRI Span: 1 Done handling message for SAPI/TEI=0/0
PRI Span: 1 T303 timed out. cref:32770
PRI Span: 1 q931.c:5925 t303_expiry: Call 32770 enters state 0 (Null). Hold sta te: Idle
PRI Span: 1 Fake clearing. cref:32770
PRI Span: 1 q931.c:9219 pri_internal_clear: alive 1, hangupack 1
Span 1: Processing event PRI_EVENT_HANGUP(6)
PRI Span: 1 q931.c:6837 q931_hangup: Hangup other cref:32770
PRI Span: 1 q931.c:6594 __q931_hangup: ourstate Null, peerstate Null, hold-state Idle
PRI Span: 1 Destroying call 0xb4dc5540, ourstate Null, peerstate Null, hold-stat e Idle
[/quote]