[Help] Configuring TE411P with Asterisk 1.0

Asterisk Asterisk Support
1

Hi,

Can anyone help me how to configure the TE411P using Asterisk 1.0.?

Appreciate your help.Thanks.

rgds,

noel

2

I would strongly suggest using 1.2rc2 with the TE411P or TE406P. In my experience you will have better performance and an easier time configuring it than under the 1.0 tree.

3

Hi All,

What we need right now is how we can configure 120 channels?because only up to 96 channels were configured…And it says "Device not found! meaning from 97 up to 120 channels we encountered an error.

Appreciate your help on this.Thank you!

rgds,
noel

4

Did you swap the T1/E1 jumpers on the TE411P card?

They are usually shipped in T1 position (24 channels per span) and if you want 30 channels per span you need to switch them to E1 mode.

5

Thanks…i’ll try this first and get back to you in a while.

brgds,
noel

6

Hi,

Thank you very much for your help.Problem solved already…

rgds,
noel