Hangup outgoing calls

Hello. I have Asterisk 1.6.2.16.1 connect to a Telecom FM GSM Route BRI with 2 SIMS. I receive calls through this route without problems and i can call to mobile phone (6X.), but when call to local phones (9X.), i receive an error “Channel 0/1, span 9 got hangup, cause 2”. This SIMS can call to phones 9X if they are in a mobile phone. The log of this span is:

– Executing [984193070@llamadasprueba:2] Dial(“SIP/10-00000005”, “DAHDI/25d/984XXXXXX”) in new stack
– Making new call for cref 32773
– Requested transfer capability: 0x00 - SPEECH

DL-DATA request
Protocol Discriminator: Q.931 (8) len=37
TEI=0 Call Ref: len= 1 (reference 5/0x5) (Sent from originator)
Message Type: SETUP (5)
TEI=0 Transmitting N(S)=6, window is open V(A)=6 K=1

Protocol Discriminator: Q.931 (8) len=37
TEI=0 Call Ref: len= 1 (reference 5/0x5) (Sent from originator)
Message Type: SETUP (5)
[04 03 80 90 a3]
Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
User information layer 1: A-Law (35)
[18 01 81]
Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Preferred Dchan: 0
ChanSel: B1 channel
]
[6c 0b 21 80 36 32 32 37 34 31 31 36 30]
Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
Presentation: Presentation permitted, user number not screened (0) ‘622XXXXXX’ ]
[70 0a 80 39 38 34 31 39 33 30 37 30]
Called Number (len=12) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) ‘984XXXXXX’ ]
q931.c:5039 q931_setup: Call 32773 enters state 1 (Call Initiated). Hold state: Idle
– Called 25d/984XXXXXX

< Protocol Discriminator: Q.931 (8) len=8
< TEI=0 Call Ref: len= 1 (reference 5/0x5) (Sent to originator)
< Message Type: RELEASE COMPLETE (90)
< [08 02 80 82]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0)
< Ext: 1 Cause: No route to specified transmit network (2), class = Normal Event (0) ]
Received message for call 0x9b6aca8 on 0x9aa8750 TEI/SAPI 0/0, call->pri is 0x9aa8750 TEI/SAPI 0/0
– Processing IE 8 (cs0, Cause)
q931.c:7197 post_handle_q931_message: Call 32773 enters state 0 (Null). Hold state: Idle
– Channel 0/1, span 9 got hangup, cause 2
q931_hangup: other hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null, hold-state Idle
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null, hold-state Idle
– Hungup ‘DAHDI/25-1’
== Everyone is busy/congested at this time (1:0/0/1)
– Auto fallthrough, channel ‘SIP/10-00000005’ status is ‘CHANUNAVAIL’