Google Voice Incomming not ringging extensions

Hi
I am having a problem where when I dial my Google Voice number it never rings any of the extensions on Free PBX it just goes to Google Voice Mail? This is a new installation using the PBX in a Flash purple 1.7.5.5.5. I have tripple checked my Google Voice settings and have port 5222 port forwarded to the Asterisk computer. It shows an active call in the Free PBX Status after the second ring on the phone used to call the Google Number but none of my extensions ring. I did see a issue on the net that could be my problem which said to increase the wait before sending DTMF 1 to 8 to 10 seconds and also have it send 11 instead of 1 but when I checked my config file it was already set to those values. I have posted a log of an incomming Google Voice call below.
Thank you for any help you can give me.
Rob
[2011-04-13 19:06:16] VERBOSE[2207] pbx.c: – Executing [myemail@gmail.com@googlein:1] Wait(“Gtalk/+14404541010-e030”, “1”) in new stack
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Executing [myemail@gmail.com@googlein:2] Set(“Gtalk/+14404541010-e030”, "ALERTNAME=myemail@gmail.com") in new stack
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Executing [myemail@gmail.com@googlein:3] JabberSend(“Gtalk/+14404541010-e030”, "asterisk,myemail@gmail.com,Incoming Google Voice Call: 4409345268") in new stack
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Executing [myemail@gmail.com@googlein:4] Set(“Gtalk/+14404541010-e030”, “CALLERID(number)=4409345268”) in new stack
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Executing [myemail@gmail.com@googlein:5] Set(“Gtalk/+14404541010-e030”, “CALLERID(name)=4409345268”) in new stack
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Executing [myemail@gmail.com@googlein:6] GotoIf(“Gtalk/+14404541010-e030”, “0?bridged”) in new stack
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Executing [myemail@gmail.com@googlein:7] Goto(“Gtalk/+14404541010-e030”, “s,regcall”) in new stack
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Goto (googlein,s,6)
[2011-04-13 19:06:17] VERBOSE[2207] pbx.c: – Executing [s@googlein:6] Answer(“Gtalk/+14404541010-e030”, “”) in new stack
[2011-04-13 19:06:18] VERBOSE[2207] pbx.c: – Executing [s@googlein:7] Wait(“Gtalk/+14404541010-e030”, “10”) in new stack
[2011-04-13 19:06:28] NOTICE[3753] chan_sip.c: – Registration for 'yourname@inbound1.vitelity.net’ timed out, trying again (Attempt #3215)
[2011-04-13 19:06:28] NOTICE[3753] chan_sip.c: – Registration for 'sipID@sipgate.com’ timed out, trying again (Attempt #12861)
[2011-04-13 19:06:28] NOTICE[3753] chan_sip.c: Failed to authenticate on REGISTER to 'sipID@sipgate.com’ (Tries 3)
[2011-04-13 19:06:28] VERBOSE[2207] pbx.c: – Executing [s@googlein:8] SendDTMF(“Gtalk/+14404541010-e030”, “11”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@googlein:9] Goto(“Gtalk/+14404541010-e030”, “from-trunk,gv-incoming,1”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Goto (from-trunk,gv-incoming,1)
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [gv-incoming@from-trunk:1] Set(“Gtalk/+14404541010-e030”, “__FROM_DID=gv-incoming”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [gv-incoming@from-trunk:2] Gosub(“Gtalk/+14404541010-e030”, “app-blacklist-check,s,1”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@app-blacklist-check:1] GotoIf(“Gtalk/+14404541010-e030”, “0?blacklisted”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@app-blacklist-check:2] Set(“Gtalk/+14404541010-e030”, “CALLED_BLACKLIST=1”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@app-blacklist-check:3] Return(“Gtalk/+14404541010-e030”, “”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [gv-incoming@from-trunk:3] Gosub(“Gtalk/+14404541010-e030”, “cidlookup,cidlookup_3,1”) in new stack
[2011-04-13 19:06:29] VERBOSE[2209] manager.c: == Manager ‘admin’ logged on from 127.0.0.1
[2011-04-13 19:06:29] VERBOSE[2209] manager.c: == Manager ‘admin’ logged off from 127.0.0.1
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [cidlookup_3@cidlookup:1] Set(“Gtalk/+14404541010-e030”, “CALLERID(name)=”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [cidlookup_3@cidlookup:2] Return(“Gtalk/+14404541010-e030”, “”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [gv-incoming@from-trunk:4] ExecIf(“Gtalk/+14404541010-e030”, “1 ?Set(CALLERID(name)=4409345268)”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [gv-incoming@from-trunk:5] Set(“Gtalk/+14404541010-e030”, “__CALLINGPRES_SV=allowed_not_screened”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [gv-incoming@from-trunk:6] Set(“Gtalk/+14404541010-e030”, “CALLERPRES()=allowed_not_screened”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [gv-incoming@from-trunk:7] Goto(“Gtalk/+14404541010-e030”, “app-daynight,1,1”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Goto (app-daynight,1,1)
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [1@app-daynight:1] GotoIf(“Gtalk/+14404541010-e030”, “0?ext-local,vmu701,1:ivr-3,s,1”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Goto (ivr-3,s,1)
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:1] Set(“Gtalk/+14404541010-e030”, “MSG=custom/nv-GenericWelcome”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:2] Set(“Gtalk/+14404541010-e030”, “LOOPCOUNT=0”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:3] Set(“Gtalk/+14404541010-e030”, “__DIR-CONTEXT=default”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:4] Set(“Gtalk/+14404541010-e030”, “_IVR_CONTEXT_ivr-3=”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:5] Set(“Gtalk/+14404541010-e030”, “_IVR_CONTEXT=ivr-3”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:6] GotoIf(“Gtalk/+14404541010-e030”, “1?begin”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Goto (ivr-3,s,9)
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:9] Set(“Gtalk/+14404541010-e030”, “TIMEOUT(digit)=3”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] func_timeout.c: – Digit timeout set to 3.000
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:10] Set(“Gtalk/+14404541010-e030”, “TIMEOUT(response)=5”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] func_timeout.c: – Response timeout set to 5.000
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:11] Set(“Gtalk/+14404541010-e030”, “__IVR_RETVM=”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:12] ExecIf(“Gtalk/+14404541010-e030”, “1?Background(custom/nv-GenericWelcome)”) in new stack
[2011-04-13 19:06:29] VERBOSE[2207] file.c: – Playing ‘custom/nv-GenericWelcome.gsm’ (language ‘en’)
[2011-04-13 19:06:34] VERBOSE[2207] pbx.c: – Executing [s@ivr-3:13] WaitExten(“Gtalk/+14404541010-e030”, “,”) in new stack
[2011-04-13 19:06:40] VERBOSE[2207] pbx.c: == Spawn extension (ivr-3, s, 13) exited non-zero on ‘Gtalk/+14404541010-e030’
[2011-04-13 19:06:40] VERBOSE[2207] pbx.c: – Executing [h@ivr-3:1] Hangup(“Gtalk/+14404541010-e030”, “”) in new stack
[2011-04-13 19:06:40] VERBOSE[2207] pbx.c: == Spawn extension (ivr-3, h, 1) exited non-zero on ‘Gtalk/+14404541010-e030’

Howdy,

Please try the PBX in a Flash forums directly:

pbxinaflash.com/forum/

Hi

I would love to post on PBX in a Flash! I have registered 2 times in the last month. I Got the email to click the link to register and then it says I need to be aproved by a moderator and I never hear anything back. I have tried using my login info and posting but it says my account is still waiting for a moderator to accept me? I have seen others online posting the same problem on other site 'No moderator ever accepted me". So it seems I am screwed! I have tried reinstalling the entire system 3 times with no success but it did work originally.

Thank You
Rob