Error messages

kinda worried coz i got these messages while compiling and installing the packages needed for Asterisk…

[root@localhost ~]# cd /usr/src/zaptel-1.2.17.1

[root@localhost zaptel-1.2.17.1]# make clean
Makefile:211: target ztdummy.o' given more than once in the same rule. rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttest fxotune rm -f patgen pattest patlooptest hdlcstress hdlctest hdlcgen hdlcverify timertest rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f zonedata.lo tonezone.lo libtonezone.so *.lo make -C /lib/modules/2.6.18-1.2798.fc6/build SUBDIRS=/usr/src/zaptel-1.2.17.1 clean make[1]: Entering directory/usr/src/redhat/SOURCES/linux-2.6.18’
make[1]: Leaving directory /usr/src/redhat/SOURCES/linux-2.6.18' make -C wct4xxp clean make[1]: Entering directory/usr/src/zaptel-1.2.17.1/wct4xxp’
rm -f .o
rm -f …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_adpcm_chan.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_channel.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_chip_open.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_chip_stats.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_conf_bridge.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_debug.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_events.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_interrupts.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_memory.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_miscellaneous.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_mixer.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_phasing_tsst.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_playout_buf.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_remote_debug.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tlv.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tone_detection.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tsi_cnct.o …/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tsst.o …/oct612x/apilib/bt/octapi_bt0.o …/oct612x/apilib/largmath/octapi_largmath.o …/oct612x/apilib/llman/octapi_llman.o
make[1]: Leaving directory /usr/src/zaptel-1.2.17.1/wct4xxp' make -C wctc4xxp clean make[1]: Entering directory/usr/src/zaptel-1.2.17.1/wctc4xxp’
rm -rf codec_test
make[1]: Leaving directory `/usr/src/zaptel-1.2.17.1/wctc4xxp’
rm -rf .tmp_versions
rm -f gendigits tones.h
rm -f libtonezone

rm -f tor2ee
rm -f fxotune
rm -f core
rm -f ztcfg-shared fxstest
rm -rf misdn*
rm -rf mISDNuser*

[root@localhost zaptel-1.2.17.1]# make
Makefile:211: target ztdummy.o' given more than once in the same rule. cc -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits > tones.h cc -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" makefw.c -o makefw ./makefw tormenta2.rbt tor2fw > tor2fw.h Loaded 69900 bytes from file ./makefw pciradio.rbt radfw > radfw.h Loaded 42096 bytes from file cc -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztcfg.o ztcfg.c cc -c -fPIC -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DBUILDING_TONEZONE -o zonedata.lo zonedata.c cc -c -fPIC -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DBUILDING_TONEZONE -o tonezone.lo tonezone.c ar rcs libtonezone.a zonedata.lo tonezone.lo cc -o ztcfg ztcfg.o libtonezone.a -lm cc -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o torisatool.o torisatool.c cc -o torisatool torisatool.o cc -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o ztmonitor.o ztmonitor.c cc -o ztmonitor ztmonitor.o cc -o ztspeed.o -c ztspeed.c cc -o ztspeed ztspeed.o cc -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" zttest.c -o zttest cc -DSTANDALONE_ZAPATA -DBUILDING_TONEZONE -DHOTPLUG_FIRMWARE -I. -O4 -g -Wall -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o fxotune.o fxotune.c cc -o fxotune fxotune.o -lm cc -shared -Wl,-soname,libtonezone.so.1.0 -lm -o libtonezone.so zonedata.lo tonezone.lo make -C /lib/modules/2.6.18-1.2798.fc6/build SUBDIRS=/usr/src/zaptel-1.2.17.1 HOTPLUG_FIRMWARE=yes modules make[1]: Entering directory/usr/src/redhat/SOURCES/linux-2.6.18’

WARNING: Symbol version dump /usr/src/redhat/SOURCES/linux-2.6.18/Module.symvers
is missing; modules will have no dependencies and modversions.

CC [M] /usr/src/zaptel-1.2.17.1/zaptel-base.o
/usr/src/zaptel-1.2.17.1/zaptel-base.c:188: warning: ‘fcstab’ defined but not used
LD [M] /usr/src/zaptel-1.2.17.1/zaptel.o
CC [M] /usr/src/zaptel-1.2.17.1/tor2.o
CC [M] /usr/src/zaptel-1.2.17.1/torisa.o
CC [M] /usr/src/zaptel-1.2.17.1/wcusb.o
CC [M] /usr/src/zaptel-1.2.17.1/wcfxo.o
CC [M] /usr/src/zaptel-1.2.17.1/wctdm.o
CC [M] /usr/src/zaptel-1.2.17.1/wctdm24xxp.o
CC [M] /usr/src/zaptel-1.2.17.1/ztdynamic.o
CC [M] /usr/src/zaptel-1.2.17.1/ztd-eth.o
CC [M] /usr/src/zaptel-1.2.17.1/wct1xxp.o
CC [M] /usr/src/zaptel-1.2.17.1/wcte11xp.o
CC [M] /usr/src/zaptel-1.2.17.1/pciradio.o
CC [M] /usr/src/zaptel-1.2.17.1/ztd-loc.o
CC [M] /usr/src/zaptel-1.2.17.1/wcte12xp.o
CC [M] /usr/src/zaptel-1.2.17.1/ztdummy.o
CC [M] /usr/src/zaptel-1.2.17.1/zttranscode.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/base.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/vpm450m.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_adpcm_chan.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_channel.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_chip_open.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_chip_stats.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_conf_bridge.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_debug.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_events.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_interrupts.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_memory.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_miscellaneous.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_mixer.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_phasing_tsst.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_playout_buf.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_remote_debug.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tlv.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tone_detection.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tsi_cnct.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/octdeviceapi/oct6100api/oct6100_api/oct6100_tsst.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/apilib/bt/octapi_bt0.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/apilib/largmath/octapi_largmath.o
CC [M] /usr/src/zaptel-1.2.17.1/wct4xxp/…/oct612x/apilib/llman/octapi_llman.o
LD [M] /usr/src/zaptel-1.2.17.1/wct4xxp/wct4xxp.o
CC [M] /usr/src/zaptel-1.2.17.1/wctc4xxp/base.o
LD [M] /usr/src/zaptel-1.2.17.1/wctc4xxp/wctc4xxp.o
Compile xpp (version trunk-r3495)
CC [M] /usr/src/zaptel-1.2.17.1/xpp/card_fxo.o
CC [M] /usr/src/zaptel-1.2.17.1/xpp/card_fxs.o
CC [M] /usr/src/zaptel-1.2.17.1/xpp/xbus-core.o
CC [M] /usr/src/zaptel-1.2.17.1/xpp/xpp_zap.o
/usr/src/zaptel-1.2.17.1/xpp/xpp_zap.c:411:2: warning: #warning “HZ != 1000. PCM would be good only with Astribank sync”
/usr/src/zaptel-1.2.17.1/xpp/xpp_zap.c:411:2: warning: #warning "HZ != 1000. PCM would be good only with Astribank sync"
CC [M] /usr/src/zaptel-1.2.17.1/xpp/xproto.o
CC [M] /usr/src/zaptel-1.2.17.1/xpp/card_global.o
LD [M] /usr/src/zaptel-1.2.17.1/xpp/xpp.o
LD [M] /usr/src/zaptel-1.2.17.1/xpp/xpd_fxs.o
LD [M] /usr/src/zaptel-1.2.17.1/xpp/xpd_fxo.o
CC [M] /usr/src/zaptel-1.2.17.1/xpp/xpp_usb.o
Building modules, stage 2.
MODPOST
CC /usr/src/zaptel-1.2.17.1/pciradio.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/pciradio.ko
CC /usr/src/zaptel-1.2.17.1/tor2.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/tor2.ko
CC /usr/src/zaptel-1.2.17.1/torisa.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/torisa.ko
CC /usr/src/zaptel-1.2.17.1/wcfxo.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wcfxo.ko
CC /usr/src/zaptel-1.2.17.1/wct1xxp.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wct1xxp.ko
CC /usr/src/zaptel-1.2.17.1/wct4xxp/wct4xxp.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wct4xxp/wct4xxp.ko
CC /usr/src/zaptel-1.2.17.1/wctc4xxp/wctc4xxp.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wctc4xxp/wctc4xxp.ko
CC /usr/src/zaptel-1.2.17.1/wctdm.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wctdm.ko
CC /usr/src/zaptel-1.2.17.1/wctdm24xxp.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wctdm24xxp.ko
CC /usr/src/zaptel-1.2.17.1/wcte11xp.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wcte11xp.ko
CC /usr/src/zaptel-1.2.17.1/wcte12xp.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wcte12xp.ko
CC /usr/src/zaptel-1.2.17.1/wcusb.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/wcusb.ko
CC /usr/src/zaptel-1.2.17.1/xpp/xpd_fxo.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/xpp/xpd_fxo.ko
CC /usr/src/zaptel-1.2.17.1/xpp/xpd_fxs.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/xpp/xpd_fxs.ko
CC /usr/src/zaptel-1.2.17.1/xpp/xpp.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/xpp/xpp.ko
CC /usr/src/zaptel-1.2.17.1/xpp/xpp_usb.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/xpp/xpp_usb.ko
CC /usr/src/zaptel-1.2.17.1/zaptel.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/zaptel.ko
CC /usr/src/zaptel-1.2.17.1/ztd-eth.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/ztd-eth.ko
CC /usr/src/zaptel-1.2.17.1/ztd-loc.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/ztd-loc.ko
CC /usr/src/zaptel-1.2.17.1/ztdummy.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/ztdummy.ko
CC /usr/src/zaptel-1.2.17.1/ztdynamic.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/ztdynamic.ko
CC /usr/src/zaptel-1.2.17.1/zttranscode.mod.o
LD [M] /usr/src/zaptel-1.2.17.1/zttranscode.ko
make[1]: Leaving directory `/usr/src/redhat/SOURCES/linux-2.6.18’

[root@localhost zaptel-1.2.17.1]# make install
Makefile:211: target `ztdummy.o’ given more than once in the same rule.

make -C /lib/modules/2.6.18-1.2798.fc6/build SUBDIRS=/usr/src/zaptel-1.2.17.1 HOTPLUG_FIRMWARE=yes modules
make[1]: Entering directory `/usr/src/redhat/SOURCES/linux-2.6.18’

WARNING: Symbol version dump /usr/src/redhat/SOURCES/linux-2.6.18/Module.symvers
is missing; modules will have no dependencies and modversions.

Compile xpp (version trunk-r3495)

Building modules, stage 2.
MODPOST
make[1]: Leaving directory /usr/src/redhat/SOURCES/linux-2.6.18' install -d /etc/udev/rules.d build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules if [ -d /usr/lib/hotplug/firmware ]; then \ install -m 644 wct4xxp/*.ima /usr/lib/hotplug/firmware; \ install -m 644 wctc4xxp/*.bin /usr/lib/hotplug/firmware; \ fi if [ -d /lib/firmware ]; then \ install -m 644 wct4xxp/*.ima /lib/firmware; \ install -m 644 wctc4xxp/*.bin /lib/firmware; \ fi Installed firmware install -D -m 755 ztcfg /sbin/ztcfg if [ -f sethdlc-new ]; then \ install -D -m 755 sethdlc-new /sbin/sethdlc; \ elif [ -f sethdlc ]; then \ install -D -m 755 sethdlc /sbin/sethdlc ; \ fi if [ -f zttool ]; then install -D -m 755 zttool /sbin/zttool; fi for x in zaptel.ko tor2.ko torisa.ko wcusb.ko wcfxo.ko wctdm.ko wctdm24xxp.ko ztdynamic.ko ztd-eth.ko wct1xxp.ko wcte11xp.ko pciradio.ko ztd-loc.ko wcte12xp.ko ztdummy.ko ztdummy.ko zttranscode.ko; do \ rm -f /lib/modules/2.6.18-1.2798.fc6/extra/$x ; \ done; \ make -C /lib/modules/2.6.18-1.2798.fc6/build SUBDIRS=/usr/src/zaptel-1.2.17.1 INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install; make[1]: Entering directory/usr/src/redhat/SOURCES/linux-2.6.18’
INSTALL /usr/src/zaptel-1.2.17.1/pciradio.ko
INSTALL /usr/src/zaptel-1.2.17.1/tor2.ko
INSTALL /usr/src/zaptel-1.2.17.1/torisa.ko
INSTALL /usr/src/zaptel-1.2.17.1/wcfxo.ko
INSTALL /usr/src/zaptel-1.2.17.1/wct1xxp.ko
INSTALL /usr/src/zaptel-1.2.17.1/wct4xxp/wct4xxp.ko
INSTALL /usr/src/zaptel-1.2.17.1/wctc4xxp/wctc4xxp.ko
INSTALL /usr/src/zaptel-1.2.17.1/wctdm.ko
INSTALL /usr/src/zaptel-1.2.17.1/wctdm24xxp.ko
INSTALL /usr/src/zaptel-1.2.17.1/wcte11xp.ko
INSTALL /usr/src/zaptel-1.2.17.1/wcte12xp.ko
INSTALL /usr/src/zaptel-1.2.17.1/wcusb.ko
INSTALL /usr/src/zaptel-1.2.17.1/xpp/xpd_fxo.ko
INSTALL /usr/src/zaptel-1.2.17.1/xpp/xpd_fxs.ko
INSTALL /usr/src/zaptel-1.2.17.1/xpp/xpp.ko
INSTALL /usr/src/zaptel-1.2.17.1/xpp/xpp_usb.ko
INSTALL /usr/src/zaptel-1.2.17.1/zaptel.ko
INSTALL /usr/src/zaptel-1.2.17.1/ztd-eth.ko
INSTALL /usr/src/zaptel-1.2.17.1/ztd-loc.ko
INSTALL /usr/src/zaptel-1.2.17.1/ztdummy.ko
INSTALL /usr/src/zaptel-1.2.17.1/ztdynamic.ko
INSTALL /usr/src/zaptel-1.2.17.1/zttranscode.ko
DEPMOD 2.6.18.1
make[1]: Leaving directory /usr/src/redhat/SOURCES/linux-2.6.18' if ! [ -f wcfxsusb.o ]; then \ rm -f /lib/modules/2.6.18-1.2798.fc6/misc/wcfxsusb.o; \ fi; \ rm -f /lib/modules/2.6.18-1.2798.fc6/misc/wcfxs.o install -D -m 755 libtonezone.so /usr/lib/libtonezone.so.1.0 [id -u= 0 ] && /sbin/ldconfig || : rm -f /usr/lib/libtonezone.so ln -sf libtonezone.so.1.0 \ /usr/lib/libtonezone.so.1 ln -sf libtonezone.so.1.0 \ /usr/lib/libtonezone.so if [ -x /usr/sbin/sestatus ] && (/usr/sbin/sestatus | grep "SELinux status:" | grep -q "enabled") ; then /sbin/restorecon -v /usr/lib/libtonezone.so; fi install -D -m 644 zaptel.h /usr/include/linux/zaptel.h install -D -m 644 torisa.h /usr/include/linux/torisa.h install -D -m 644 tonezone.h /usr/include/tonezone.h install -m 644 doc/ztcfg.8 /usr/share/man/man8 install -m 644 doc/zttool.8 /usr/share/man/man8 [id -u` = 0 ] && /sbin/depmod -a 2.6.18-1.2798.fc6 || :
[ -f /etc/zaptel.conf ] || install -D -m 644 zaptel.conf.sample /etc/zaptel.conf
build_tools/genmodconf linux26 “” "tor2 torisa wcusb wcfxo wctdm wctdm24xxp ztd-eth wct1xxp wcte11xp pciradio ztd-loc wcte12xp wct4xxp wcfxs wctdm8xxp wct2xxp"
Building /etc/modprobe.d/zaptel…


*** WARNING:
*** If you had custom settings in /etc/modprobe.d/zaptel,
*** they have been moved to /etc/modprobe.d/zaptel.bak.


*** In the future, do not edit /etc/modprobe.d/zaptel, but
*** instead put your changes in another file
*** in the same directory so that they will not
*** be overwritten by future Zaptel updates.


[root@localhost zaptel-1.2.17.1]# cd\

[root@localhost ~]# cd /usr/src/libpri-1.2.4

[root@localhost libpri-1.2.4]# make clean
rm -f *.o *.so *.lo *.so.1 *.so.1.0
rm -f testpri testprilib libpri.a libpri.so.1.0
rm -f pritest pridump
rm -f .depend

[root@localhost libpri-1.2.4]# make
CC=gcc ./mkdep -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g ls *.c
gcc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -c -o copy_string.o copy_string.c
gcc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -c -o pri.o pri.c
gcc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -c -o q921.o q921.c
gcc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -c -o prisched.o prisched.c
gcc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -c -o q931.o q931.c
gcc -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -c -o pri_facility.o pri_facility.c
ar rcs libpri.a copy_string.o pri.o q921.o prisched.o q931.o pri_facility.o
ranlib libpri.a
gcc -fPIC -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -o copy_string.lo -c copy_string.c
gcc -fPIC -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -o pri.lo -c pri.c
gcc -fPIC -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -o q921.lo -c q921.c
gcc -fPIC -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -o prisched.lo -c prisched.c
gcc -fPIC -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -o q931.lo -c q931.c
gcc -fPIC -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -g -o pri_facility.lo -c pri_facility.c
gcc -shared -Wl,-hlibpri.so.1.0 -o libpri.so.1.0 copy_string.lo pri.lo q921.lo prisched.lo q931.lo pri_facility.lo
/sbin/ldconfig -n .
ln -sf libpri.so.1.0 libpri.so
ln -sf libpri.so.1.0 libpri.so.1

[root@localhost libpri-1.2.4]# make install
mkdir -p /usr/lib
mkdir -p /usr/include
install -m 644 libpri.h /usr/include
install -m 755 libpri.so.1.0 /usr/lib
if [ -x /usr/sbin/sestatus ] && ( /usr/sbin/sestatus | grep “SELinux status:” | grep -q “enabled”); then restorecon -v /usr/lib/libpri.so.1.0; fi
( cd /usr/lib ; ln -sf libpri.so.1.0 libpri.so ; ln -sf libpri.so.1.0 libpri.so.1 )
install -m 644 libpri.a /usr/lib
if test $(id -u) = 0; then /sbin/ldconfig -n /usr/lib; fi

should i be worried with this one?
what should i do?
dunno how to deal with such stuffs…
im new to this one…

You better be concerned with this one. Again, search Fedora knowledge base or ask Fedora community about how to avoid such. Seems that your source package is incomplete.

You probably don’t even use XPP card so no worries.

Looks like a bug in the make file.

Well, this doesn’t apply to you because it’s the first time you installed zaptel. But remember the message and follow the advice when you update in the future.

if i overlook the things you pointed out above, would there be further dilemmas that ill encounter?

Shouldn’t have any immediate impact. Warnings are warnings, right?