Dahdi modules not loading

dahdi modules are not loading, I am using Cenots8 Linux Distribution.

cat /sys/module/dahdi/version

pci:0000:02:00.0 wcte13xp- d161:800a Wildcard TE131/TE133

cat /etc/modprobe.d/dahdi.conf
options wcte13xp default_linemode=e1

dahdi_genconf -vvv

Default parameters from /etc/dahdi/genconf_parameters
Empty configuration – no spans
Generating /etc/dahdi/assigned-spans.conf
Empty configuration – no spans
Generating /etc/dahdi/system.conf
Empty configuration – no spans
Generating /etc/asterisk/dahdi-channels.conf

You should contact your card vendor for dahdi problems.

However, they are going to need to see the messages you got when you tried to load it.

BTW dahdi modules are loaded sucesffuly but I think digium card not configured.
card shows on lspci

localhost*CLI> module reload chan_dahdi.so 
Module 'chan_dahdi.so' reloaded successfully.
localhost*CLI> dahdi show chann
channel   channels  
localhost*CLI> dahdi show channels
   Chan Extension       Context         Language   MOH Interpret        Blocked    In Service Description                     
 pseudo                 default                    default                         Yes                                        
localhost*CLI> dahdi show status 
Description                              Alarms  IRQ    bpviol CRC    Fra Codi Options  LBO
localhost*CLI> pri show spans

I’d say you definitely need to contact the vendor.

Sangoma/Digium don’t support their commercial products on the open source forum.

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.