I am trying to get conferencing to work.
I have Conferencing module 2.6.0.2 installed (FreePBX). I defined and conference room with all options set as default (“None” and "No"s). Setting in meetme.cnf: conf => 26155,1234
When I dial in I am prompted for the password. if I enter a wrong password it tells me i did- so far so good.
but when I enter the correct password - I get hung up after about two seconds.
Below is log info:
– Executing [26155@from-internal:1] Macro(“SIP/4155-00000003”, “user-callerid,”) in new stack
– Executing [s@macro-user-callerid:1] Set(“SIP/4155-00000003”, “AMPUSER=4155”) in new stack
– Executing [s@macro-user-callerid:2] GotoIf(“SIP/4155-00000003”, “0?report”) in new stack
– Executing [s@macro-user-callerid:3] ExecIf(“SIP/4155-00000003”, “1?Set(REALCALLERIDNUM=4155)”) in new stack
– Executing [s@macro-user-callerid:4] Set(“SIP/4155-00000003”, “AMPUSER=4155”) in new stack
– Executing [s@macro-user-callerid:5] Set(“SIP/4155-00000003”, “AMPUSERCIDNAME=Ori Aldubi (H)”) in new stack
– Executing [s@macro-user-callerid:6] GotoIf(“SIP/4155-00000003”, “0?report”) in new stack
– Executing [s@macro-user-callerid:7] Set(“SIP/4155-00000003”, “AMPUSERCID=4155”) in new stack
– Executing [s@macro-user-callerid:8] Set(“SIP/4155-00000003”, “CALLERID(all)=“Ori Aldubi (H)” <4155>”) in new stack
– Executing [s@macro-user-callerid:9] GotoIf(“SIP/4155-00000003”, “0?continue”) in new stack
– Executing [s@macro-user-callerid:10] Set(“SIP/4155-00000003”, “__TTL=64”) in new stack
– Executing [s@macro-user-callerid:11] GotoIf(“SIP/4155-00000003”, “1?continue”) in new stack
– Goto (macro-user-callerid,s,18)
– Executing [s@macro-user-callerid:18] NoOp(“SIP/4155-00000003”, “Using CallerID “Ori Aldubi (H)” <4155>”) in new stack
– Executing [26155@from-internal:2] Set(“SIP/4155-00000003”, “MEETME_ROOMNUM=26155”) in new stack
– Executing [26155@from-internal:3] GotoIf(“SIP/4155-00000003”, “0?READPIN”) in new stack
– Executing [26155@from-internal:4] Answer(“SIP/4155-00000003”, “”) in new stack
– Executing [26155@from-internal:5] Wait(“SIP/4155-00000003”, “1”) in new stack
– Executing [26155@from-internal:6] Set(“SIP/4155-00000003”, “PINCOUNT=0”) in new stack
– Executing [26155@from-internal:7] Read(“SIP/4155-00000003”, “PIN,enter-conf-pin-number,”) in new stack
– Playing ‘enter-conf-pin-number.ulaw’ (language ‘en’)
– User entered ‘1234’
– Executing [26155@from-internal:8] GotoIf(“SIP/4155-00000003”, “1?USER”) in new stack
– Goto (from-internal,26155,16)
– Executing [26155@from-internal:16] Set(“SIP/4155-00000003”, “MEETME_OPTS=”) in new stack
– Executing [26155@from-internal:17] Goto(“SIP/4155-00000003”, “STARTMEETME,1”) in new stack
– Goto (from-internal,STARTMEETME,1)
== Spawn extension (from-internal, STARTMEETME, 1) exited non-zero on ‘SIP/4155-00000003’
– Executing [h@from-internal:1] Macro(“SIP/4155-00000003”, “hangupcall”) in new stack
– Executing [s@macro-hangupcall:1] GotoIf(“SIP/4155-00000003”, “1?skiprg”) in new stack
– Goto (macro-hangupcall,s,4)
– Executing [s@macro-hangupcall:4] GotoIf(“SIP/4155-00000003”, “1?skipblkvm”) in new stack
– Goto (macro-hangupcall,s,7)
– Executing [s@macro-hangupcall:7] GotoIf(“SIP/4155-00000003”, “1?theend”) in new stack
– Goto (macro-hangupcall,s,9)
– Executing [s@macro-hangupcall:9] Hangup(“SIP/4155-00000003”, “”) in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on ‘SIP/4155-00000003’ in macro ‘hangupcall’
== Spawn extension (from-internal, h, 1) exited non-zero on ‘SIP/4155-00000003’
Any ideas?
Really appreciate any help.
Ori 