Has anyone got this configuration working?
I have a 7960 (V7.5) SIP and a 7970 (V7) SCCP working but the new V8 SIP has me stumped. Is there a good write up anywhere or else I would be prepared to write up what to do if required.
many thanks - its driving me mad…
i don’t think a coherent write-up exists on how to make the 7970s work with SIP & Asterisk but you might be able to piece one together from the chan_sccp mailing list. check out the most recent posts.
I was reading docs for SIP8.2 last night, and they clearly indicate it only works with CallManager5.0.
Try an older SIP firmware load that is more generic SIP (e.g. 7.5). I haven’t played with the 7970s so can’t comment on whether that firmware image event works with them.
My cisco 7970 runs with 8.0.2 SR1 SIP Firmware, connected to asterisk.
check this link for a sample config file:
lists.digium.com/pipermail/aster … 43171.html
…and follow the thread for more information about speeddials, dialplan template etc…
[quote=“gtcleaves”]i don’t think a coherent write-up exists on how to make the 7970s work with SIP & Asterisk …[/quote]Take a look here
asteriskguru.com/tutorials/c … ation.html