I seem NOT to be able to dial out of my ZAP channel what could be wrong.I have pasted what I get when I run a few commands.
DO I need to create a ZAP trunk in extensions.conf ?
Connected to Asterisk 1.2.13 currently running on qa-asterisk5 (pid = 21387)
Verbosity is at least 100
– Remote UNIX connection
qa-asterisk5CLI> zap show channel 8
Channel: 8k5CLI>
File Descriptor: 23
Span: 2risk5CLI>
Extension: 5CLI>
Dialing: no5CLI>
Context: incoming8
Caller ID: 5CLI>
Calling TON: 0LI>
Caller ID name: >
Destroy: 0k5CLI>
InAlarm: 0k5CLI>
Signalling Type: FXS Kewlstart
Radio: 0isk5CLI>
Owner: CLI>
Real: CLI>
Callwait: >
Threeway: >
Confno: -1k5CLI>
Propagated Conference: -1
Real in conference: 0
DSP: norisk5CLI>
Relax DTMF: noLI>
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: noI>
Pulse phone: noI>
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Offhook
qa-asterisk5*CLI>
[root@qa-asterisk5 Asterisk5]# /sbin/ztcfg -vvvv
Zaptel Version: 1.4.12.1
Echo Canceller: MG2
Configuration
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
Channel 05: FXS Kewlstart (Default) (Slaves: 05)
Channel 06: FXS Kewlstart (Default) (Slaves: 06)
Channel 07: FXS Kewlstart (Default) (Slaves: 07)
Channel 08: FXS Kewlstart (Default) (Slaves: 0Cool
8 channels to configure.
[root@qa-asterisk5 Asterisk5]#
Thanks for the help.