Calling in and out problems

Hello,

I have a junghanns QuadBRI card installed and configured in my system. Asterisk installed with the newest test version of Bristuff so that I could use Asterisk 1.4. Calling to internal phones works fine, but the second I call outside it tells me that the number doesn’t exist. When I try to call to an internal number from the outside I get the same error. Anybody have any idea what it could be?

I have a ISDN 2 Bri line, from KPN in the Netherlands, in case anybody knows them.

btw: These are my probably somewhat relevant files

Zaptel.conf

loadzone=nl
defaultzone=nl

qozap span definitions

most of the values should be bogus because we are not really zaptel

span=1,1,3,ccs,ami
span=2,2,3,ccs,ami
span=3,3,3,ccs,ami
span=4,4,3,ccs,ami

bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12

zapata.conf

;
; Zapata telephony interface
;
; Configuration file

[channels]
;
; Default language
;
language=nl
;
; Default context
;
;
switchtype = euroisdn

; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
signalling = bri_cpe_ptmp
; p2p TE mode (for connecting ISDN lines in point-to-point mode)
;signalling = bri_cpe
; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)
;signalling = bri_net_ptmp
; p2p NT mode (for connecting an ISDN pbx in point-to-point mode)
;signalling = bri_net

pridialplan = unknown
prilocaldialplan = unknown
nationalprefix = 0
internationalprefix = 00
signalling=bri_cpe_ptp

priindication = passthrough

echocancel = yes
callgroup=1
pickupgroup=1
faxdetect=both

context=default
group = 1
; S/T port 1
channel => 1-2

group = 2
; S/T port 2
channel => 4-5

group = 3
; S/T port 3
channel => 7-8

group = 4
; S/T port 4
channel => 10-11

extensions.conf

[general]
static=yes
writeprotect=yes

[globals]
PHONE10=SIP/10
PHONE11=SIP/11
PHONE12=SIP/12
PHONE13=SIP/13
PHONE14=SIP/14
PHONE15=SIP/15
PHONE16=SIP/16
PHONE17=SIP/17
PHONE19=SIP/19
PHONE20=SIP/20
PHONE90=${PHONE10}&${PHONE11}&${PHONE12}&${PHONE13}&${PHONE14}&${PHONE15}&${PHONE16}&${PHONE17}&${PHONE19}&${PHONE20}
FAX1=SIP/33

[macro-iedereen]
exten => s,1,Dial(${PHONE10},1,t)
exten => s,2,Dial(${PHONE90},20,t)
exten => s,3,Hangup
exten => s,103,Hangup

[macro-standaard]
exten => s,1,Dial(${ARG1},20,t)
exten => s,2,Voicemail(u${MACRO_EXTEN})
exten => s,3,Hangup
exten => s,103,Voicemail(b${MACRO_EXTEN})
exten => s,104,Hangup

[macro-fax]
exten => fax,1,Dial(${ARG1})
exten => fax,2,Congestion
exten => fax,102,Congestion

[default]

exten => _33,1,Macro(iedereen,${PHONE90})
exten => _30,1,Macro(fax,${FAX1})

exten => 10,1,Macro(standaard,${PHONE10})
exten => 11,1,Macro(standaard,${PHONE11})
exten => 12,1,Macro(standaard,${PHONE12})
exten => 13,1,Macro(standaard,${PHONE13})
exten => 14,1,Macro(standaard,${PHONE14})
exten => 15,1,Macro(standaard,${PHONE15})
exten => 16,1,Macro(standaard,${PHONE16})
exten => 17,1,Macro(standaard,${PHONE17})
exten => 19,1,Macro(standaard,${PHONE19})
exten => 20,1,Macro(standaard,${PHONE20})

exten => 25,1,Dial(SIP/192.168.1.68)
exten => 25,2,Hangup

exten => 50,1,VoicemailMain
exten => 50,2,Hangup

exten => _600,1,MeetMe(600)

Any help would be greatly appreciated.

Thanks in advance,

David

Please supply SIP.conf

regards