Has anyone had luck on getting * to work with Broadvoice? I’m using Broadvoice’s settings from broadvoice.com/support_install_asterisk.html to no aval.
My SIP configs are exactly what’s listed on there, but when I dial my number i get the voicemail…
--- (10 headers 14 lines) ---
Sending to 147.135.20.221 : 5060 (NAT)
Using INVITE request as basis request - 8a03b6-8a@147.135.20.221
Found peer 'sip.broadvoice.com'
Found RTP audio format 18
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 96
Found RTP audio format 97
Found RTP audio format 100
Peer audio RTP is at port 147.135.20.250:18460
Found description format G729 for ID 18
Found description format PCMU for ID 0
Found description format PCMA for ID 8
Found description format iLBC for ID 96
Found description format t38 for ID 97
Found description format telephone-event for ID 100
Capabilities: us - 0x8000e (gsm|ulaw|alaw|h263), peer - audio=0x50c (ulaw|alaw|g729|ilbc)/video=0x0 (nothing), combined - (ulaw|alaw)
Non-codec capabilities (dtmf): us - 0x0 (nothing), peer - 0x1 (telephone-event), combined - 0x0 (nothing)
Peer audio RTP is at port 147.135.20.250:18460
Looking for 7164061621 in incoming (domain 65.99.246.30)
<--- Reliably Transmitting (NAT) to 147.135.20.221:5060 --->
SIP/2.0 404 Not Found
Via: SIP/2.0/UDP 147.135.20.221:5060;received=147.135.20.221
From: ""<sip:xxxxxxxxxx@147.135.20.221;user=phone>;tag=yz01
To: "Name"<sip:s@65.xx.xxx.xxx>;tag=as09649b38
Call-ID: 8a03b6-8a@147.135.20.221
CSeq: 1 INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Supported: replaces
Content-Length: 0
<------------>
longhorn*CLI> sip show registry
Host Username Refresh State Reg.Time
sip.broadvoice.com:5060 7164061621 24 Registered Wed, 26 Sep 2007 22:28:21
Really destroying SIP dialog '50797d27147343dc02df988346586354@sip.broadvoice.com' Method: REGISTER
longhorn*CLI> sip show peers
Name/username Host Dyn Nat ACL Port Status
sip.broadvoice.com/716406 147.135.20.221 N 5060 Unmonitored
cisco1/test (Unspecified) D N 0 UNKNOWN
2 sip peers [Monitored: 0 online, 1 offline Unmonitored: 1 online, 0 offline]
I see “REGISTER” messages every 30 seconds or so when I turn on debugging.