Trouble making PRI calls

Asterisk Asterisk Support
1

I have installed libpri 1.2.8, dahdi 2.6.1 and Asterisk 1.8. The configurations are made according to the samples in “Asterisk: The Definitive Guide” book. i m trying to make pri calls by configuring E1 on Digium TE110 card. but when ever i dial from soft-phone to a number on the remote end of E1 line, i get the following message:

-- Executing [20004@internal:1] Dial("SIP/windows-00000000", "DAHDI/G0/20004") in new stack Created an extension cc interface for '20004@internal' with id 1 and parent 0 DAHDI confmute(0) failed on channel 31: Invalid argument -- Couldn't call DAHDI/G0/20004 DAHDI confmute(0) failed on channel 31: Invalid argument Unable to restore gains: Invalid argument Failed to reset conferencing on channel 31: Invalid argument -- Hungup 'DAHDI/31-1' == Everyone is busy/congested at this time (0:0/0/0) -- Auto fallthrough, channel 'SIP/windows-00000000' status is 'CHANUNAVAIL'
kindly help me in sorting this out

2

You should qualify for support from Digium itself. This forum is for peer support of the open source Asterisk software. There is a sticky thread explaining this.

3

Except that the TE110P is long since an EOL product and no longer receives any support (www1.digium.com/en/products/end-of-life).

At this point in time it’s highly unlikely that this user is going to qualify for any installation assistance. As we stopped selling that model 5 years ago, they’re likely not buying new, but on the resale market, so they won’t be able to register the product for the complimentary installation support.

Cheers.