Hi,
I’ve just bought a TE212P and it looks like the card is using the OSLEC echo canceller and not the built in hardware one.
>>ztcfg -vv
Zaptel Version: 1.4.10
Echo Canceller: OSLEC
Configuration
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 16: D-channel (Default) (Slaves: 16)
7 channels to configure.
Could anyone point me in the right direction.
I’ve searched these forums and nothing clear comes up.
Many thanks in advance,
Julian
p.s.
relevant configs…
zaptel.conf
Span 1: TE2/0/1 “T2XXP (PCI) Card 0 Span 1” (MASTER)
span=1,1,0,ccs,hdb3,crc4
bchan=1-6
dchan=16
unused=7-15,18-31
Span 2: TE2/0/2 “T2XXP (PCI) Card 0 Span 2”
#span=2,2,0,esf,b8zs
termtype: te
#bchan=25-47
#dchan=48
Global data
loadzone = au
zapata.conf
[trunkgroups]
[channels]
language=en
context=from-zaptel
overlapdial=yes
priindication = outofband
switchtype=euroisdn
pridialplan=unknown
prilocaldialplan=unknown
signalling=pri_cpe
echocancelwhenbridged=yes
echocancel=yes
rxgain=0
txgain=0
busydetect=no
pridialplan=local
internationalprefix=0011
nationalprefix=0
usecallerid=yes
hidecallerid=no
callprogress=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
group=0
channel => 1-6
defaultzone = au