T405P channels problems using 1.2.1

Asterisk Asterisk Support
1

I’m using asterisk 1.2.1 with zaptel 1.2.1 and libpri 1.2.1 aswell.

this is my zap config

span=1,1,0,ccs,hdb3,crc4,yellow
bchan=1-15,17-31
fxoks=32
loadzone=uk
defaultzone=uk

i do

service zaptel start or modprobe zaptel && modprobe wct4xxxp 
ztcfg -vvvv

output

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: FXO Kewlstart (Default) (Slaves: 32)

32 channels configured.

dmesg

Unassigning channel 0/16!
Unassigning channel 0/1!
Unassigning channel 0/2!
Unassigning channel 0/3!
Unassigning channel 0/4!
Unassigning channel 0/5!
Unassigning channel 0/6!
Unassigning channel 0/7!
Unassigning channel 0/8!
Unassigning channel 0/9!
Unassigning channel 0/10!
Unassigning channel 0/11!
Unassigning channel 0/12!
Unassigning channel 0/13!
Unassigning channel 0/14!
Unassigning channel 0/15!
Unassigning channel 0/16!
Unassigning channel 0/17!
Unassigning channel 0/18!
Unassigning channel 0/19!
Unassigning channel 0/20!
Unassigning channel 0/21!
Unassigning channel 0/22!
Unassigning channel 0/23!
Unassigning channel 0/24!
Unassigning channel 0/25!
Unassigning channel 0/26!
Unassigning channel 0/27!
Unassigning channel 0/28!
Unassigning channel 0/29!
Unassigning channel 0/30!
Unassigning channel 0/31!
Unassigning channel 1/1!
Registered tone zone 4 (United Kingdom)

Asterisk then can’t find zap channel…
anyone know what is the problem?

Not fixed at all…
change kernel version the problem is still there…

:neutral_face: