Hi,
I have 4 port Digium Card. I configured libss7 on asterisk 13. Span 1 is working fine but when i configure cic of span 2, call is established but nothing hear.
Please see the below configuration:
system.conf
span 1,1,0,css,hdb3
bchan=1-15,17-31
mtp2=16
span 2,2,0,css,hdb3
bchan=32-46,48-62
chan_dahdi.conf
context=from-ss7
echocancel=no
signalling=ss7
ss7type = itu
ss7_called_nai=national
ss7_calling_nai=national
ss7_internationalprefix=00
ss7_nationalprefix=0
ss7_subscriberprefix=
ss7_unknownprefix=
ss7_explictacm=yes
linkset =1
pointcode =XXXX
adjpointcode =XXXX
defaultdpc =XXXX
networkindicator=national_spare
group=0
sigchan=16
cicbeginswith =1
channel = 1-15
cicbeginswith =17
channel =17-35
cicbeginswith =32
channel = 32-46
cicbeginswith =48
channel = 48-62
Please need your help.
Thanking you
Assuming this is a genuine card and a current product, you want to use Digium’s commercial support channels. You will need the card serial number.
Please let me know where i use serial number? please explain me how to use this serial number?
Thanks david551 for your reply.
My telco gave me the following parameters:
Signalling Information:SLC00: Time Slot 16; CIC-16, Channel ID: 10
CIC Range: 0-31, TID Range: 17824-17855, Frame: 4, Slot: 12, E1: 13,
Board Type: E32
CIC Range:32-63, TID Range:17856-17887, Frame: 4, Slot: 12, E1: 14, Board Type:E32
CIC Range:64-95, TID Range:17888-17919, Frame:4, Slot:12, E1:15, Board Type: E32
Do you think i have configured properly according to telco parameters? if you think, my configuration is not correct and as a result, no audio is playing. please can you help me how can i configure cic or others related parameters properly?.
Thanking you