Sometimes fxs or fxo ports of my tdm410 card, are blocked.
Then I had to restart my system.
I can hear from the phone connected to the fxs port a busytone (and I can’t stop it with hookflash) or a mute tone…
So I saved the cli output.
Note that nobody answer… but there was an automatic hangup+starting simple switch sequence… and it repeats a lots of times…
Could someone help me to know what happen…?
Starting simple switch on ‘DAHDI/1-1’
– Executing [s@Incoming1:1] NoOp(“DAHDI/1-1”, “chiamata in arrivo dalla prima linea analogica”) in new stack
– Executing [s@Incoming1:2] Macro(“DAHDI/1-1”, “normal,1,DAHDI/4&SIP/5”) in new stack
– Executing [s@macro-normal:1] Verbose(“DAHDI/1-1”, “1,Incoming call from “telefonoIP” <24>”) in new stack
Incoming call from “telefonoIP” <24>
– Executing [s@macro-normal:2] Dial(“DAHDI/1-1”, “DAHDI/4&SIP/5,40,KkTt”) in new stack
[Feb 16 16:47:45] WARNING[2432]: chan_dahdi.c:2385 send_callerid: write failed: Unknown error 500
– Called 4
== Using SIP RTP CoS mark 5
– Called 5
– DAHDI/4-1 answered DAHDI/1-1
– Hungup ‘DAHDI/4-1’
== Spawn extension (macro-normal, s, 2) exited non-zero on ‘DAHDI/1-1’ in macro ‘normal’
== Spawn extension (Incoming1, s, 2) exited non-zero on ‘DAHDI/1-1’
– Hungup ‘DAHDI/1-1’
– Starting simple switch on ‘DAHDI/1-1’
[Feb 16 16:47:53] NOTICE[2433]: chan_dahdi.c:7505 ss_thread: Got event 18 (Ring Begin)…
[Feb 16 16:47:54] ERROR[2433]: callerid.c:562 callerid_feed: No start bit found in fsk data.
[Feb 16 16:47:54] WARNING[2433]: chan_dahdi.c:7545 ss_thread: CallerID feed failed: Success
[Feb 16 16:47:54] WARNING[2433]: chan_dahdi.c:7649 ss_thread: CallerID returned with error on channel ‘DAHDI/1-1’
[Feb 16 16:47:54] NOTICE[2433]: chan_dahdi.c:7677 ss_thread: MWI: Channel 1 no message waiting!
– Executing [s@Incoming1:1] NoOp(“DAHDI/1-1”, “chiamata in arrivo dalla prima linea analogica”) in new stack
– Executing [s@Incoming1:2] Macro(“DAHDI/1-1”, “normal,1,DAHDI/4&SIP/5”) in new stack
– Executing [s@macro-normal:1] Verbose(“DAHDI/1-1”, “1,Incoming call from “” <>”) in new stack
Incoming call from “” <>
– Executing [s@macro-normal:2] Dial(“DAHDI/1-1”, “DAHDI/4&SIP/5,40,KkTt”) in new stack
[Feb 16 16:47:54] WARNING[2433]: chan_dahdi.c:2385 send_callerid: write failed: Unknown error 500
– Called 4
== Using SIP RTP CoS mark 5
– Called 5
– DAHDI/4-1 answered DAHDI/1-1
– Hungup ‘DAHDI/4-1’
== Spawn extension (macro-normal, s, 2) exited non-zero on ‘DAHDI/1-1’ in macro ‘normal’
== Spawn extension (Incoming1, s, 2) exited non-zero on ‘DAHDI/1-1’
– Hungup ‘DAHDI/1-1’
– Starting simple switch on ‘DAHDI/1-1’
[Feb 16 16:48:03] NOTICE[2434]: chan_dahdi.c:7505 ss_thread: Got event 18 (Ring Begin)…
[Feb 16 16:48:05] NOTICE[2434]: chan_dahdi.c:7505 ss_thread: Got event 2 (Ring/Answered)…
[Feb 16 16:48:05] NOTICE[2434]: chan_dahdi.c:7677 ss_thread: MWI: Channel 1 no message waiting!
– Executing [s@Incoming1:1] NoOp(“DAHDI/1-1”, “chiamata in arrivo dalla prima linea analogica”) in new stack
– Executing [s@Incoming1:2] Macro(“DAHDI/1-1”, “normal,1,DAHDI/4&SIP/5”) in new stack
– Executing [s@macro-normal:1] Verbose(“DAHDI/1-1”, “1,Incoming call from “” <>”) in new stack
Incoming call from “” <>
– Executing [s@macro-normal:2] Dial(“DAHDI/1-1”, “DAHDI/4&SIP/5,40,KkTt”) in new stack
[Feb 16 16:48:05] WARNING[2434]: chan_dahdi.c:2385 send_callerid: write failed: Unknown error 500
– Called 4
== Using SIP RTP CoS mark 5
– Called 5
– DAHDI/4-1 answered DAHDI/1-1
– Hungup ‘DAHDI/4-1’
== Spawn extension (macro-normal, s, 2) exited non-zero on ‘DAHDI/1-1’ in macro ‘normal’
== Spawn extension (Incoming1, s, 2) exited non-zero on ‘DAHDI/1-1’
– Hungup ‘DAHDI/1-1’