The thing is that occasionally the voice will start hearing the voice is heard wrong … hoarse after the E1 and does not take or receive calls
This are my configs…
cat /etc/dahdi/system.conf
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
fxsks=32
#echocanceller=mg2,32
fxsks=33
#echocanceller=mg2,33
fxsks=34
#echocanceller=mg2,34
fxsks=35
#echocanceller=mg2,35
fxsks=36
#echocanceller=mg2,36
fxsks=37
#echocanceller=mg2,37
fxsks=38
#echocanceller=mg2,38
fxsks=39
#echocanceller=mg2,39
Global data
loadzone = us
defaultzone = us
#cat /etc/asterisk/chan_dahdi.conf
[channels]
language=es
#include chan_dahdi_additional.conf
#include dahdi-channels.conf
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
callerid=asreceived
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
callgroup=1
pickupgroup=1
immediate=no
;amaflags=default
musiconhold=default
busydetect=yes
group=0
callerid=asreceived
context=from-zaptel
signalling=pri_cpe
switchtype=euroisdn
channel => 1-15,17-31
signalling=fxs_ks
callerid=asreceived
group=1
context=from-zaptel
channel => 32
signalling=fxs_ks
callerid=asreceived
group=1
context=from-zaptel
channel => 33
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 34
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 35
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 36
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 37
signalling=fxs_ks
callerid=asreceived
group=3
context=from-zaptel
channel => 38
signalling=fxs_ks
callerid=asreceived
group=3
context=from-zaptel
channel => 39
cat /etc/asterisk/dahdi-channels.conf
; Span 1: WCT1/0 “Wildcard TE121 Card 0” (MASTER) HDB3/CCS/CRC4 REDClockSource
group=0
context=from-zaptel
switchtype=euroisdn
signalling=pri_cpe
channel => 1-15,17-31
signalling=fxs_ks
callerid=asreceived
group=1
context=from-zaptel
channel => 32
signalling=fxs_ks
callerid=asreceived
group=1
context=from-zaptel
channel => 33
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 34
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 35
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 36
signalling=fxs_ks
callerid=asreceived
group=2
context=from-zaptel
channel => 37
signalling=fxs_ks
callerid=asreceived
group=3
context=from-zaptel
channel => 38
signalling=fxs_ks
callerid=asreceived
group=3
context=from-zaptel
channel => 39
cat /proc/interreuptions
129: 64976317 0 0 0 IO-APIC-level wcte12xp0
130: 66 461 694 2347 PCI-MSI-X eth1-2
137: 152387 56580966 0 8192205 IO-APIC-level wctdm24xxp0
138: 68 2696 1514 557 PCI-MSI-X eth1-3
ls /usr/src/asterisk/
asterisk-1.4.27.1
dahdi-linux-complete-2.2.0.2+2.2.0
libpri-1.4.10.2
asterisk-addons-1.4.10
Kernel (the newest from centos 5.4, any recommendations for kernel?)
kernel-2.6.18-164.9.1.el5
kernel-headers-2.6.18-164.9.1.el5
kernel-devel-2.6.18-164.9.1.el5
cat /proc/dahdi/1
Span 1: WCT1/0 “Wildcard TE121 Card 0” (MASTER) HDB3/CCS ClockSource
IRQ misses: 30 (problems with irqs??)
1 WCT1/0/1 Clear (In use) (EC: VPM150M)
2 WCT1/0/2 Clear (In use)
3 WCT1/0/3 Clear (In use)
4 WCT1/0/4 Clear (In use)
5 WCT1/0/5 Clear (In use) (EC: VPM150M)
6 WCT1/0/6 Clear (In use)
7 WCT1/0/7 Clear (In use)
8 WCT1/0/8 Clear (In use)
9 WCT1/0/9 Clear (In use)
10 WCT1/0/10 Clear (In use)
11 WCT1/0/11 Clear (In use)
12 WCT1/0/12 Clear (In use)
13 WCT1/0/13 Clear (In use)
14 WCT1/0/14 Clear (In use)
15 WCT1/0/15 Clear (In use)
16 WCT1/0/16 HDLCFCS (In use)
17 WCT1/0/17 Clear (In use)
18 WCT1/0/18 Clear (In use)
19 WCT1/0/19 Clear (In use)
20 WCT1/0/20 Clear (In use)
21 WCT1/0/21 Clear (In use)
22 WCT1/0/22 Clear (In use)
23 WCT1/0/23 Clear (In use)
24 WCT1/0/24 Clear (In use)
25 WCT1/0/25 Clear (In use) (EC: VPM150M)
26 WCT1/0/26 Clear (In use)
27 WCT1/0/27 Clear (In use)
28 WCT1/0/28 Clear (In use)
29 WCT1/0/29 Clear (In use)
30 WCT1/0/30 Clear (In use)
31 WCT1/0/31 Clear (In use)
cat /proc/dahdi/2
Span 2: WCTDM/0 "Wildcard AEX800 Board 1"
IRQ misses: 30
32 WCTDM/0/0 FXSKS (In use) RED
33 WCTDM/0/1 FXSKS (In use)
34 WCTDM/0/2 FXSKS (In use)
35 WCTDM/0/3 FXSKS (In use)
36 WCTDM/0/4 FXSKS (In use)
37 WCTDM/0/5 FXSKS (In use)
38 WCTDM/0/6 FXSKS (In use) (EC: VPM150M)
39 WCTDM/0/7 FXSKS (In use) RED
both card have an eco cancellation hardware (e1 and 8FXO)
The error in asterisk console
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 09:44:48] NOTICE[9461] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 11:47:12] NOTICE[23384] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 11:47:23] DEBUG[23384] chan_dahdi.c: Queuing frame from PRI_EVENT_PROCEEDING on channel 0/1 span 1
[Jan 13 11:47:24] NOTICE[23384] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 11:47:24] NOTICE[23384] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Jan 13 11:47:26] DEBUG[23384] chan_dahdi.c: Echo cancellation already on
[Jan 13 11:47:26] NOTICE[23384] chan_dahdi.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
[Jan 13 11:47:27] ERROR[23384] chan_dahdi.c: !! Got reject for frame 38, but we have nothing – resetting!
[Jan 13 11:47:37] NOTICE[23384] chan_dahdi.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
Only works if i restart dahdi…
Any comments ?