Hi ,
i have sangoma A101
i have the pri status in down/active
all leds are green
and here below the debug of pri :
pri set debug on :
5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
the provider told me that they use ISUP
as far as i know that ISUp is just a header above the ss7
and told me they have to use the settings below :
pointcode=5-116-6 should be this or 11174
im wondering how to add this setting , shoud i add it in the hexadicimal forum like
pointcode=11174
or
pointcode=5-116-6
in the file
chan_dahdi.conf
???
any help ? any guide to troubleshoot my current problem ?
my kind regards